Jump to content

Brian Blaylock

Bulldog
 View Profile  See their activity

  • Posts

    420

  • Joined

  • Last visited

 Content Type 

Everything posted by Brian Blaylock

  1. Brian Blaylock
    I know where thats at I live in White county Il
  2. Brian Blaylock
    I've got one too
  3. Brian Blaylock
    It is stamped on the front of the passenger side frame rail between the spring hangers behind the tire sometimes it takes a wire brush and or putty knife to clean the frame enough to read it
  4. Brian Blaylock
    Where in Western Ky are you located
  5. Brian Blaylock
    Depending on how many RPMs your turning low to mid 70s without doing the math
  6. Brian Blaylock
    Which transmission and what size tires does it have?
  7. Brian Blaylock
    At my last job I drove a 1980 Superliner with a V-8 and you could see where someone filled the holes where the V-8 emblems had been they also had a 1980 Superliner parts truck with the emblems still on it
  8. Brian Blaylock
    Don't know for sure which month but I think the R-Model came out as a mid model year change because their were a lot of 65 model B-Models
  9. Brian Blaylock
    Buy you a good battery disconnect switch and install it in the main cable between the starter and batteries they should hold a charge better then
  10. Brian Blaylock
    Ray1953 where are you located?
  11. Brian Blaylock
    Oaktown In and Marion Ku are both in my neck of the woods
  12. Brian Blaylock
    I am in Southeastern Illinois it will be the weekend before I can get any pics
  13. Brian Blaylock
    Had to get to page eleven in the newspaper here before you seen anything about it then just a half page article
  14. Brian Blaylock
    I have one off of a 74 RS 700 that I'm not going to use
  15. Brian Blaylock
    Do you know if the western f model and western r model bumpers were the same
  16. Brian Blaylock
    I seen a B-68 one time with a 671 in it they had to cut a good size hole in the firewall to make it fit
  17. Brian Blaylock
    Looks like a pretty solid truck to cut up to put a green leaker in
  18. Brian Blaylock
    Yes I put one on my B-61
  19. Brian Blaylock
    I don't know if they still make them or not but all those engines I have seen used a Vickers pump find your local Vickers dealer and they might be able to get you one
  20. Brian Blaylock
    There should be a vent on your tank a lot of times they have a vented cap to allow it to relieve pressure much like a fuel tank if you cycle the system a time or two then take the cap off and it has pressure that is more than likely your problem
  21. Brian Blaylock
    If this is a endt 865 or 866 and the reservoir has fluid in it but the power steering doesn't work the input shaft on the pump could be broken as this was a common problem
  22. Brian Blaylock
    The book Mack driven for a century might help
  23. Brian Blaylock
    I've got a good takeout Trd-67 that I would like to sell
  24. Brian Blaylock
    Crossville Il
  25. Brian Blaylock
    I have three Mack transmissions that needs a new home one is a good Trd-67 that I took out of my B-61 and replaced with a Tr-720 The other two are Trq-7220 both have issues one has problems in the main box the other has problems in the compound so I was told by the guy I bought them from I no longer need them if someone doesn't take them they will take a trip to China via the local scrap yard

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...