Jump to content

880joe

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    538

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by 880joe

  1. 880joe
    I have a 93 MH with an E7 V-Mack engine
  2. 880joe
    Oil pan is turned half around and sump tube switched around on axle forward but do know a guy that moved his axle without changing pan and never had any issues but he also didn't keep the truck to long afterwards so I don't know long term effects
  3. 880joe
    Yes I did have organ donars and a fair sized project
  4. 880joe
    The first picture is how the truck looked when I bought it from Superdog, and the last two are with the axle moved and a new paint job and some chrome.
  5. 880joe
    Bottom end should be the same I believe the only difference in the two are in the fuel system
  6. 880joe
    You will need front bumper bracket that will bolt on top of front spring hangers once you move it forward,shock towers are different mudflap hangers and brackets that goes behind front wheels,two small L shaped pieces that goes on bottom of cab that holds small rubber flap,there will also be a bracket that bolts on where front cab mount and lower front cab corner is different and of course a bumper and hood.
  7. 880joe
    Do you ever miss the older truck you had before this one?
  8. 880joe
    Probably not impossible but would be alot more work to make it look correct
  9. 880joe
    You can get them new from Mack or at least you could a couple of years ago
  10. 880joe
    Never mind I see he asked about CT not CL
  11. 880joe
    Isn't the center section where turbo bolts on slanted on the CL's if so you will need a different part number
  12. 880joe
    There is a reporting like carfax for big trucks called Rigdig
  13. 880joe
    Is Mike Morgan racing Mackvader in the Bandit Big Rig Series this year?
  14. 880joe
    Thank you for the reply but I'm needing abs fault code not engine fault code
  15. 880joe
    I have a 99 CH Mack with Wabco abs brake system can anyone tell me what the 2 3 Blink code is?
  16. 880joe
    Does the e7 have an offset and straight cam key like on the etech if so that may have to be changed to correct the timing
  17. 880joe
    The last e7's was also made in a 355/380 but I'm not sure if the torque on them is the same as the etech
  18. 880joe
    I don't think the 380/410 program is available for the early etech
  19. 880joe
    David if you have your truck reset to a 355/380 you will have 1560 torque same as a 427 instead of the 1460 you have now with the 400 setting
  20. 880joe
    How much did the blixton improve the 99? Did it improve fuel milage and power or just power?
  21. 880joe
    I would be interested in a set or two
  22. 880joe
    I'm located near Springfield Missouri and I want 1500 dollars for the neway
  23. 880joe
    Are you comparing American Bosch to Robert Bosch when you say one is 3 bolt and other is 4
  24. 880joe
    So if you can put the gear off the E7 vmac pump on a mechanical E6 pump to make a mechanical E7 engine could you put the E6 gear on a vmac pump and have a vmac electronic E6 then
  25. 880joe
    Sounds like the peanuts in the rearend are slipping.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...