Jump to content

880joe

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    585

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by 880joe

  1. 880joe
    I ran the 75hp injectors from K+S for 4 years without any issues. About a month ago I put Rochester's stage 2.5 injectors in and new eups my driver said he about had to learn to drive it again it made a big difference. I'm driving a 355/380 with injectors from Antrim Diesel and 460 turbo I will loose 18 to 20 mph on the same hill my driver said he looses 2 mph
  2. 880joe
    KandS diesel out of Schofield WI or Rochester Diesel out of Rochester MN both have better injectors that will get you more power
  3. 880joe
    will a rear mounted pto off a 12speed fit a 2 stick 6 speed
  4. 880joe
    A t800 kw I wouldn't consider a classic truck with its sba and sloped nose.
  5. 880joe
    I may be the gear slipping on the fuel pump
  6. 880joe
    I only had the taper leaf on a couple of road trucks they seemed to ride pretty good and had good articulation in the truck stop parking lot pot holes. The ride is much better than the camel backs that I have had.
  7. 880joe
    I think the hood would fit but the bumper probably won't because I believe the frame is wider on the CXU than the CH so your tow hook holes won't be right.
  8. 880joe
    I have st34 suspension I believe. I got ahold of Donovan Spring and pretty sure they have what I need. Thanks for the response and help
  9. 880joe
    Does anybody make a 44000lb replacement spring for taper leaf spring suspension. I was told that there was an aftermarket one available but haven't been able to find any
  10. 880joe
    a pre ccrs engine will have a horse shoe shaped fuel return line in between the heads. that set up should do fine the 355/380 has the same torque as the 427
  11. 880joe
    I have two 110 gallon round aluminum fuel tanks for sale. Would like to sell as a pair. The right side has a small dent and they both have slight corrosion where the straps where, but do not see any corrosion all the way through tanks. Have pictures of both tanks and will send via email, unable to download to this post. Asking $400.00 plus shipping for the pair. Call Joey at 417-880-4862 with any questions.
  12. 880joe
    Visors are sold and no I don't have any lund visors for an MH
  13. 880joe
    2 New lund visors 150 each plus shipping
  14. 880joe
    You can go to your Mack dealer and they can get you a new vin tag
  15. 880joe
    Parting out 89 DM mack has 44000lb rears Dayton wheels probably 5 something ratio had a 2070 transmission
  16. 880joe
    I have been looking at doing the same thing. Looks to me like use all the non egr wiring harness and change front engine cover so A/C compressor is on corect side and front engine mount is the same. All wiring going into cab appears to be same
  17. 880joe
    There was a Cummins powered MH on St.Louis MO Craigslist a few days ago. Should be every thing to convert yours over
  18. 880joe
    What year and hp is your old engine also does it have a jake brake
  19. 880joe
    The yellow truck in the picture looks like a CL to me and I don't think the axles will interchange
  20. 880joe
    Looks like you were at Tamko in Joplin Mo
  21. 880joe
    Are they for an R model
  22. 880joe
    If you put the AC cam in an AI engine will you have the same thing as a pre emission ETEC engine
  23. 880joe
    Heres a couple of my superliners.
  24. 880joe
    Started the 24 Mack and took it for a drive today
  25. 880joe
    you might check all your ground wires a bad ground will cause your truck to do odd things

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...