Cruiseliner

It only does it when it's hot. It's like a big thump when going from low to high but good going from high back to low. This was a brand new box not a rebuild. Can you replace the syncho without taking the box out ?

Hi, I have spider hubs, When this happens I get a slight pause in the drive like someone very quickly depressing the clucth and releasing it, that the same time you hear the click.

Hi, I have a noise (click ) when I'm driving through loose dirt while watering to mix with grader. It doesn't it while driving or on hard surface. I'm thinking it's in the diff. Any help with this is appreciated.

Hi, I have a 90 model valueliner with a 18 speed Mack box, I think it's a T2018. When I go from low range to high it makes a big clonk noise. The box is only 3 years old with only a cupple of thousands Ks on it. Is there an adjustment or something to stop this. All help is a appreciated.

Hi,I recently seen a Mack Bulldog with a red head and was wondering where I can get one

Hi,Thanks for your help. I have fixed it, changed the power steering to transmission fluid and replaced the LH side rim and tyre and the wobble has gone.

Hi, They are tubeless and have replaced the unies and centre bearing and centre bearing housing rubbers.

Hi, I have a 90i model valueliner which gets a shake in the steering wheel around 60klms and goes at 70klms. It is hard to hang on to it, it shakes so much. I have checked the wheel bearings, king pins, changed the tyres and one rim, checked the toe in, check the steering pump all seem to be fine. Changed the steering filter. It seems to pulsate, there are two adjustable screws top and bottom which have nothing to do with the free play/slack in the box as there two larger ones that do that. do the smaller ones control the pressure in the steering box? Is there anything else I can do to fix this problem? As I'm almost ready to wreck her out. Thanks for any thoughts

Hi, Does anyone have information on a mack 9 speed range change. I have one that the range changer needs doing and want to know what's involved. Is the a site where I can get a exploded view also? Thanks for any advice

Hi, I have a 90 model valueliner with a 350 4 valve engine with a machanical injector pump. The problem is it keeps huntting or up and down revs. If you try to hold it at a certain rev it hunts and makes it hard to maintain a certain speed. It mainy does this anything under 1600, Is there away it fix this. thanks for any info. Dan

Hi, I have a M11 cummins in a truck and the electrics is driving my crazy, differant codes all the times. Had it to cummins for 2 days, outcome they could find anything. Wander if you can chage it to machanical like the bigcam 400? change the fuel pump and injectors?

Thanks Guys will ckeck it all out.

Did ckeck the tie rod end OK, It;s a spoke wheel and the tyres are wearing on the inside.Am putting a new set of rims and tyres on also

Thanks guys I,ll ckeck it out.

Hi, ckecked the king pins and put new steer tyres on and wheel nuts are tight.