Freightrain

Look on the drivers side of rear axle(up around the gear area-if it's a double reduction) and it will be stamped x.xx. Mine has 4.62 and with single over triplex it runs 65~mph. With a direct duplex, I bet 50ish is all you'll get. Look on the drivers side of tranny(main box) and read the "TRDxxxx" and see what it says. This will clarify if you have OD or not. Herb, my truck only has the one fuel filter on the front pass. side of motor. I put one back at the tank with a separator in it to make it easier to keep the front one clean. Also much easier to replace the spin on hanging off the frame then puking fuel all over the place on the engine mounted original version. I know I should just put some spin on types from a 237, but oh well.

I knew there was a company a few years back that made them, though pretty hi tech and expensive. Diesel powered, with 5 spd motorcycle tranny. Here is another company: http://www.eastcoastminiclassics.com I've seen KW T800 style bodies that fit on go-cart type frames on Ebay.

Ok, anyone have access to a B model with integeral sleeper?? Can get some good pics of front/side/rear to enable good measurements to be taken so it can be modeled? Thanks guys. BTW, the R model turned out awesome. http://www.mwmodeltrucking.com/forum/viewt...32&start=72

Ya know...................... That just AIN'T right Shoulda just said it was 4 donuts tall and 8 wide...................now that would be something he would be able to relate to better

My new laptop won't accept a direct line from my Handycam like my old laptop did. Can't seem to find a driver to make it work either. Now I have to use my VCR and copy it to tape, then back to laptop............what a pain. Windows Vista.........what a wunderfool thing! Love to have an old V8 truck! Just couldn't imagine the fuel it would go through LOL!!!

Don't think he's worried too much about powertrain, as it's gunno be electric powered(r/c) anyway. I think he's just wanting some more overall detail information.

Sounds like for $2000 they'll put the plugs back in the rocker shafts LOL!! Ain't that nice of'um?

There is a fellow on a R/C modeler forum building a R model from scratch(flat plastic stock) and is needing underhood shots, anything to help get details done. Anyone have some decent wide angle shots with hood open to share here? I've googled and found some for sale ads with underhood shots, but they aren't the greatest shots. Thanks link to site http://www.mwmodeltrucking.com/forum/viewt...=a&start=36

Neat stuff.

Ugh........................ Shouldn't that have Pete emblems on it??? Likely the driver would need the seat on the floor as to NOT be seen driving it LOL!!!!

Sounds like a bargin. Always wanted one, though have no real need for it, IE: noise maker.

Jim, a fellow that used to work with me young son did that video, that's the reason for me being it more then once. Great work on the chassis. I'm SO jealous!

One of my favs

Well, I'd bet if you just made sure it had FUEL in it when you start it you'd be alot happier to begin with.

Hmmm, I let my B go all winter hooked up and it's been fine all these years. Actually going on 6+yrs for the batteries/starter when I switched it to Neg ground and 12v start. Didn't put a disconnect switch on it either. In fact, I know the batteries are starting to fail as it takes some time for them to get above 12v when the alt kicks in. I pulled two off(since the one battery box was getting kinda weak anyway) and now it still starts easily with just 2 batteries. Guess I must not have too much of a drain on the system?

.........that's the break you take to lick your lips while pronoucing it properly

Ya, sad to hear about her and Ed McMahon. She did age gracefully, one of the lucky ones. Too bad they were forgotten so quickly............when the PERV died. Don't forget, Kmart is having a MJ tribute sale this week. All boys pants 1/2 off....get'm while you can.

Scott is on this forum. Have to search his name, I think he goes by Sthoren here?

Great work!! I can't WAIT to see it start to come together. It's going to be awesome! "no rust on anything"................ok, ok............just rub it in! LOL!!! I had to buy special welding wire to get two pieces of rust to stick together on my truck LMAO!!!!

Welcome aboard Jim.

Sick, just sick. I won't even suggest what I want to do to them kids.

Hey, as long as you don't have an ammo in the cab....can't be all too illegal. The only problem would be most any business that has the "NO" firearms notice stapled to every wall.

Herb...I put dual pipes on mine just so I could hear it better on MY side of the truck LOL!!! Of course after a long trip...it does get a bit old. I do find myself leaning out the window to get a better tone of the bark. The engine noise inside the cab tends to drown out the exhaust. Glad the g/f isn't a chatty cathy and doesn't mind a few hours not talking! (Ya, I got it good LOL!)

Ya, kinda hard to see, but I figured might be a gun rack in the back window?

Are you referring to your temps, not your actual license? You should be able to add the extras(tank, doubles, hazmat) even after you take your actual road test, but before you get your printed license. As for driving jobs, likely won't get much help from anyone now. With no experience and with the HUGE pool of drivers finding an opening is slim. You'll have to start out with the low name companies and get your 1-2 yrs in so you can find a better place. Unless you know someone that will mentor you in a small company? Usually the insurance companies will restrict driving for newbies. You'll be stuck intrastate til your 21 anyhow.