Jump to content

alex g

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,530

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by alex g

  1. alex g
    From the pics I'd say thats a 2 valve. If it runs good it's a keeper
  2. alex g
    That impressed me as much as the truck as well
  3. alex g
    Have the same problem here. I saw a real sharp superliner pulling a dump trailer a few times on QEW around Oakville. A friend of mine has spotted it too but neither of us can get a pic of it
  4. alex g
    I believe he decided to keep it. You'd be better to call the number he posted. He hasn't been on here in over a year
  5. alex g
    That looks like it was driven to its resting spot a long time ago. What engine is in it? I'm not sure about your jack I'm sure they'll be a lock somewhere though. If you send a pic of the aluminum base for the brake pedal I'll see if it's same as a r model I probably have one. Your air valve that operates your brakes could possibly be what's seized as well. What's your plans for truck?
  6. alex g
    Very cool truck but my back aches just looking at it 😃
  7. alex g
    That's a good combo in a Mack in my opinion anyway. I've seen lots of 350s pull right along side with 425s. Is it possible you need a tuneup possible top end set or do you have boost leak. Could be easier than a engine swap
  8. alex g
    I'll take a look
  9. alex g
    I remember when they had cabovers set up like that. Used to see them anytime I headed up north. They were so big compared to anything else on road
  10. alex g
    I have some gauges new and used when you figure out what extra gauges you want to install
  11. alex g
    Good job
  12. alex g
    Looks like it was well cared for
  13. alex g
    I had same problem. I tapped range selector air valve with a hammer and it worked. Not sure since you changed valve if your issue is the same.
  14. alex g
    That is one rare burger.
  15. alex g
    I've never saw a tandem MB. I like it
  16. alex g
    Good pic. Did you time that out with train?
  17. alex g
    I have two steel dash Gauge clusters $50 each
  18. alex g
    I marked mine where it came off but I'm not sure if it's necessary. I unbolted it and tapped it with a 5 lb hammer til it came off. I never torqued it but I ran it in with my impact gun til it came tight then hit it once more. So far mine is fine maybe someone else can confirm
  19. alex g
    Not sure if they were common. Where'd you score one kept in such good shape?
  20. alex g
    Ive had them before but unfortunately none at this time. Someone should have something for you.
  21. alex g
    There's some diagrams on here if you keep looking. I've done mine too. There's not much to it but hard to explain without pics. Good luck
  22. alex g
    There's 6 bolts ...one of them has a seal over it. You'll have to dig the seal away and under it there's a 12 point head I believe it's 12 anyway. You'll need a special socket for it. Good luck
  23. alex g
    Great memories I remember letting my daughter drive my R model for the first time. Couldn't wipe the smile off either one of our faces
  24. alex g
    I never realized that truck was left in such a poor state. Hats off to them for taking on such a project
  25. alex g
    What's the diameter of that tank I'll take a look I might have something

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...