alex g
-
Posts
1,530 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by alex g
-
Yes bearings are lubricated in oil. If it's leaking on inside through brake shoes it's a wheel seal that will need replacing
-
King B Wrecker.
alex g replied to 41chevy's topic in Antique and Classic Mack Trucks General Discussion
Would take the sting outta a tow bill if it was that unit towing you. -
1934 Mack CH
alex g replied to j hancock's topic in Antique and Classic Mack Trucks General Discussion
I didn't know they recycled the CH name -
G Model lifting weights
alex g replied to 41chevy's topic in Antique and Classic Mack Trucks General Discussion
Glad someone had a camera on them that day. Great pic -
I've got one if Coenut doesn't work out. I held it up to my day cab r model and it's same. $100
-
Yes I phoned contact person talked to him he said he'd get in touch with me if they needed it. Thanks
-
Here's what I have in rod bearings. I'll look for a set of mains if these are what you need
-
I'm pretty sure I have a set. I'm gonna look tonight if I get a chance
-
You might try calling number posted for a quicker response
-
Could use a bit more information but I'm assuming your losing prime. Check fuel lines for cracks and check valve at pump may not be working properly
-
Leesburg Florida Macks
alex g replied to Brocky's topic in Antique and Classic Mack Trucks General Discussion
The single axle superliner is from here in Ontario. He owns a very sharp green and black b model as well -
I have a X107A. Not sure if it will work for you.
-
Me too but definitely not new in box. That's cool
-
Thanks everyone for all the help so far.
-
I got a few pics of pump but I didn't have time to clean up to get any #s. I plan on running a sprocket and chain off the drive to the winch. It's not really set up to go direct too.
-
Not sure I'll crawl under next week and find out.
-
Thanks for the info. I'm going to run it off wet line on my truck so I have to get a hydraulic drive for it yet any suggestions on size of hydraulic drive? Also thanks for oil info I did not realize some oil was not compatible with bronze gears.
-
Don't know much about them my old float had a winch and I never even looked to see what kind it was. Is there much that can go wrong with them I never had any issues with my old one in 5 years I had it.
-
Thanks it should do me for my application I pull the odd dead truck up on the float. I'm hoping I won't need parts for it but for what I have in to it I'll probably just replace it if it gives me any major issues.
-
Thanks for sharing that's a good video
-
I got this winch to mount on a float trailer I'm assuming it's large enough to do the job but I'd like to know how many pounds it's rated at. The info tag is cut in half so I can't get any info from it. It has 1/2 inch cable and it's a Garwood.
-
Would have helped tonight
alex g replied to Rich Reinhart's topic in Antique and Classic Mack Trucks General Discussion
Good video to see the old truck at work. I see there planting alotta houses in the field across from you. -
Yes Clifford would definitely welcome your truck. The Seaforth show was very good for first show. Very well run I believe it will be annual event
-
Good video I like the boat passing thru at the end
-
R686ST with hood scoop
alex g replied to staxx's topic in Antique and Classic Mack Trucks General Discussion
Thanks for remembering that but I sold it
BMT Forum Logo
