alex g
-
Posts
1,530 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by alex g
-
Lexington Kentucky maths show
alex g replied to mackdump600@yahoo.com's topic in Truck Shows and Events
Just confirmed motel. Staying at Best Western. Will get there Thursday evening. -
Before you try to make more power you should set valve train on top end and make sure your boost is adequate. They already make alot of power if running properly.
-
Never to big to go for a truck ride
-
Vin should be on the inside of drivers door about head height when you open it. Definitely will be on ownership
-
You could open rad cap slowly and carefully when your up to temp and put a thermometer in to get actual temp. I had gauge fail on mine.
-
Just got this Mack
alex g replied to 75 Mack's topic in Antique and Classic Mack Trucks General Discussion
I have a 5 speed Mack in my 84 and when I don't drive it for a while I look like a newbie. If your a smoker take the opportunity to light a smoke between gears it seems to take that long. In the past you could have enough time to open a cold beverage but that's frowned upon now. -
I put jack under yolk and Jack it up enough to have pressure on it and give it a hit with a sledgehammer. Sometimes use heat with that too if there stubborn.
-
Yes one on left he just got the other he bought a couple years ago. I'm assuming that's the same one your brother in law saw
-
-
Yes he lives about 10 mins from me in Dunnville Ontario. He mentioned there was one with a plow.
-
I only saw a phone pic of it but that was probably his your bil saw. He bought one a few years ago out of the same place
-
Great looking truck. A friend of mine bought one of the Autocars from concrete delivery auction. I heard there was a few deals to be had I regret not going.
-
Watts Mack are the owners of this forum so I encourage you to try them. If they don't have it I have a good selection of interior parts for R models. You can pm call or text me 289-332-0101
-
rust in gas tank
alex g replied to 609albert's topic in Antique and Classic Mack Trucks General Discussion
I'd use separate clean fuel tank to get it running. I had a rusty fuel tank I sent out and had it cleaned and coated. You will be plagued with problems if you use that rusty tank. -
Loads Gonna Be Late
alex g replied to alex g's topic in Antique and Classic Mack Trucks General Discussion
Yes we had flooding. Not sure how high water was when that happened but that's a main bridge it's good for heavy weight -
Loads Gonna Be Late
alex g replied to alex g's topic in Antique and Classic Mack Trucks General Discussion
Where's the Bandit or Duke boys when you need them. They'd take care of that situation -
Grand River flooded from ice jams and caused allota damage including this bridge in Port Bruce Ontario. This was Friday. Truck was still there next day.
-
Should be common solenoid. Any truck parts store should carry it. I might have one I'd sell if your not in a hurry I'd have to look to see if I have one.
-
Turbo should bolt on no problem. I think difference between 300 and 350 is pump and turbo. I think you make a 350 out of a 300 by changing pump and turbo. Can probably get away with just changing turbo.
-
That's one big ass truck. Cool pics
-
I'll sell my Mack sign for that. Just throwing that out there lol
-
How much is cheap $20,000 -$30,000 range
-
Message sent1979 R 611
-
1989 superliner
alex g replied to wateronthego@yahoo.com's topic in Exterior, Cab, Accessories and Detailing
Where are you located. I think I have a good drivers door I'd sell but shipping might be a issue. -
You possibly replaced it with a low air pressure valve instead of a brake valve. They work opposite of each other but look same.
BMT Forum Logo
