theakerstwo

Again do not hone the liners.They have the finish that they need.I think your looking at a very old manual.

Do not hone the liners.

Is this a four wire sensor?

Here is the way I see it.There is not one man or woman in the white house that cares If I get shot to death or my family or any one I know so why do they claim to be so interested in my safety.Its all about taking control over the people some day.Obama and others have and always will be them that would love to be in charge of the world.Obama has suck ups that will do any thing including destroying this country for power when they know the will of the people is against them.He has used the democrate party and pulled them down now to his level.

I my self have been one who has made fun of the young guys not knowing as much as we who think they should but think about it.Most are on their first job and don't know just like we was when we was when young.For the last few years I try to remember the mistakes I made and look at the little foolish things the parts guys do and then I try to balance every thing out.I have learned from years working with the public just chill out and its going to be a faster day.I know with me when a man comes in and is in a bad mood it puts me in same mood.If he gets short with me I don't care myself.But I have seen it all.I have seen guys that would come up to the parts counter that did not know what they wanted or guys that expect the parts man to remember his vin # from last month.Or a bolt about as long as his little finger but fatter than that one you sold me last week.I buy some things at nappa and I have been asked many times when buying things for my mack what year and just let them look for a bit before telling them it ant in there.

That's it.The lifters that they repair for my friend looks good.They replace the hard face and grind.One of the engines had a problem with coolant in the oild so he replaced the engine and give the old one to me and I took the cam and lifters out for my self.I have used them in a engine of mine but have not put the truck to work yet.

Window 7

Well this is what the liberals wanted.I still think if he could run again same bunch would vote for him.He is not the antichrist but he is lead by that spirit.He is working for one world control.And don't think for a second that he ant got enough suck ups that they are working full time and some may be watching us now.

Why cant I copy and paste? Any way check out Hillcrest cam in little rock ark.They can also replace the surface on the lifters.I have helped install two of them on a friends trucks with out any problems.

Just remember that there is about half of the people that want Hillary and she will be just as bad as this spook.Its got to do will free stuff, our free stuff.

We should go easy on McCain because we don't know what they did with him or to him when he was a POW.He may be doing the best his mine will let him do.

Also there was a special oil that goes in them.

Before you start replacing parts you need to read the ecm for codes.

There is not many drag links like that anymore

That is a shock and there is a link that is missing that goes down to a braket on the axle.

Also make sure the stop is push in and gas pedal is mashed down.

Some guys just need not to pick up tools.

Call a mack dealer with vin # and just ask them what model.Could be a 92 and 93

I cant rmenber seeing a crank with 3/4 thread so it may have been over sized.

This is a 98 ch with 350 engine 9 speed 4.17 mack on air ride.Wet kit with new fuel tank with oil in one end and fuel in other end.new king pins and bushings and new brakes. 17500.00

It goes in the side of the head to a injector.Get the torque specs and don't go over the specs.

Having a Mackatack? Hope things go well and you get out soon.

Any thing to destroy our country.Bad thing is there still are enough people here to vote him back in if he was to run again.

Only exemptions will be for a non American.Our guest will get a pass for so many years.

Windows 8