Jump to content

felicello122

BMT VIP
 View Profile  See their activity

  • Posts

    878

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by felicello122

  1. felicello122
    I am looking for the chassis only, piggyback frame. It can be wreckedi only need the rear frame and tandem, tires can be a bonus but not needed. I cut it and weld to the rear of my tanker. The frame is just the right height, call me 914 474 7383, dominick.
  2. felicello122
    Can't beat a garage with heat, no more worrying about the weather, enjoy!
  3. felicello122
    Now you have to be a complete f*+#ing a-hole to do something like that, i guess he/she thought they could just drive over like the gravedigger!
  4. felicello122
    The owner of that kW must have had a heart attack when he seen that!
  5. felicello122
    That r model is sweet, I wonder if it is still around, that had a lot of goodies on it!
  6. felicello122
    The nut at the bottom of the king pin may be too tight.
  7. felicello122
    I got 4 budd hubs off my 2000 rd, the rears were 44000 pound rating, I changed the ass end to 38000 pounders, I have 4 axles also, my housings are cracked and my rears are tired, hubs are good though, I don't have the drums cause I reused them, call me if you are interested, 914 474-7383, my name is Dominick.
  8. felicello122
    could be a13 or an 18, look a the tag on the right side of the transmission, if it's missing use the vin, but it may have been swaped out at one time, the tag is your best bet.
  9. felicello122
    I have two off an e7 e- tech, I will ck the casting numbers tomorrow if you still need them.
  10. felicello122
    It's in right, the carrier bearing yoke and the power divider yoke are lined up, the one on the trans. Will be the opposite.
  11. felicello122
    i got one if you still need one, I want $350 used and repainted. My number is 914 474-7383.
  12. felicello122
    Very nice toys!
  13. felicello122
    got any more pics of this Pete, looks very detailed.
  14. felicello122
  15. felicello122
    how much do you want for the fenders and radiator?
  16. felicello122
    I just had an ad-9 blowing off about every 60 seconds, changed the 1/4 lines still did it, turned out the delivery port ck valvr was missing, it was a liitle rubber ball i took from my back up one working good now.
  17. felicello122
    noto is the one I am talking about, the blue one, he is my cousin.
  18. felicello122
    how come no one posted pics of my cousin's blue b-model, he takes it to englishtown alot, i couldn't make it this year?
  19. felicello122
    I always had good luck with dynaflex, Lincoln makes nice stuff but I think they are pricey, grand rock would be the cheapest, depending on your budget they all will cost you, what size are you going with?
  20. felicello122
    That is a nice drawing you did mark.
  21. felicello122
    I have a stamped superdog2 bumper not in too bad of shape, I will try to post it if anyone is interested.
  22. felicello122
    pete on the trailer
  23. felicello122
    The studs are long enough to do steel on the inside and aluminum on the outside.
  24. felicello122
    I have 4 hubs and 4 axles, 44,000pounders recent bearings in and out looking to sell they are hub pilot off a 2000 rd model mack make me an offer I am in Marlboro, n.y. they are off mack rears.
  25. felicello122
    the daycab needs horns and bullet lights just looks unfinished to me.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...