felicello122
-
Posts
878 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by felicello122
-
Connecticut Construction Trucks
felicello122 replied to BKrois's topic in Antique and Classic Mack Trucks General Discussion
looks like a camelback to me. -
Thanks phildirt
-
WANT TO BUY Wanted E6 4v Bosch injector cores
felicello122 replied to rsb502's topic in Parts Wanted
I have 4 nozzles out of a em6 let me no if you want them? -
That dash does not look like its seen any treatment in a long time, that would drive me crazy if I drove that it like that!
-
i thought all the magnums were dual exhausts?
-
turning it up will make a big difference if you are stock now, like brutis said keep your pyro below 10 and you will pass a 427.
-
primary shoe v. secondary shoe
felicello122 replied to burnstransport's topic in Air Systems and Brakes
New to me, you must have a mismatch in the box, happens alot with reman stuff, red indicates 23,000 lbs rating. -
Remove the tires and get the drum off and you can then get a hammer to the back off the hub, couple of soft taps should do, remove outter bearing first.
-
The ecm are facing down plugs are clean.
-
what rpm s are you turning to pull off 95mph 2 stick?
-
The pump was installed in January 2012, have some chains from caps laying at the bottom of suction tank, when i test drove the truck, i left the foward cover off i think i am going to remove the rear one.
-
Could also be a broken crank, hope not.
-
Well i checked the harness and pins, they were both good, removed flywheel sensor, i checked the teeth for any clutch and grease debris, all,clean, ended up replacing the sensor. Truck ran and didn't stall now just a sputter, here and there. I also replaced all of the batteries and one jumper. I think i have a unit pump acting up, i replaced 3 out of 6 over the last 3 months, the last one 2 weeks ago.
-
thats what I thought after I posted it.
-
Your welcome glad to help out.
-
Looks nice, you did a great job putting it together, why you do keep your stacks so short?
-
Just need a little paint on the frame and wheels and your done, looks nice long.
-
no ecovance on it.
-
any pics of your new glider yet?
-
you going to run straight pipes, it is coming along nicely.
-
looks way better as a tandem, v8 looks good in there too!
-
Thanks for the help, the harness will be checked first thing monday and the pins.
-
2000 e-tech 400 h.p. in a rd. Truck occasionally sputters and will smoke white and then stall. Usually starts back up and will run fine and then do it again. I'm thinking the fuel suction line may be collapsing, or the pickup tube in the tank is cracked? The fuel filters are new, no lights on yet. Anyone suffering any of these things also all sensors are new and all grounds and connections have been cleaned and checked.
-
How much did you pay for the trailer, nice unit?
-
Put a nice straight pipe on it and use a curve 45 degree turn, an eight footer should do it, if you don't like noise a four foot curve then.
BMT Forum Logo
