blackdog2

Old fruehauf you can buy after market legs cheaper!!!!

They are constantly loosing them around here usually on I-95 southbound then there was two truckers that would put on 1 load leave for 2 hours and open the second part of trailer and put on another load then off to New Jersey they have Tri-axel trailers to haul the weight .

Good Year started in CT he work for his farther in Naugatuck hardware store on Rubber Ave. owned a house in Guilford ct witch my friend bought in the 90s 18 room 4 fire places now a two family was built late 1800s.

In New Haven Conn they have some 50.000 lbs coils in the last 4 months ive seen 3 trailers bent in the middle and one twisted were it laid over every accident state police found traveling to fast I moved them on a 35 ton low bed we off load ships several times a month one driver laid over 3 coils at once in the yard two trips later 1 coil over

If he is doing working for state or municipal his DOT # must clean of all violation if not he will not be awarded the job unless he puts in a different DOT # like everybody in Conn does butt there is another truck s on crags list just punch in mack with a lot lesss work.

Candy sugary drinks &bag of chips & locker room talk

That is why mack use motor oil because pump seal separates the 2 fluids apart if use power steering fluid it will go into the engine.

Unfortunate they have a few empty pages in the back of rule book were they can fill in as needed or make fit !!!!!!!!!

Afcart 5 wheel locks into the trailer sow there is no roll on the trailer riggers special

The foundation was saved that's all counts . no dummsters .

Its got patina !!

What about U-model

Do you know how many people told me they bought last one they are over priced

Great show !! Its the good staff and they're started on the next year show !!! thank god for community service is free!!

tack weld (spot) 2 places

If you don't buy it the guy in the next state over will buy it and sell it for 3-x- more .

total was around 460 one DM-600 grate show.

All set ready to go before the large crowd of spectators.

Been there done that or all three while your in there and clean the rust.

bump

What is the opening hours so i could get sonny UP hes been touching up the DM-600 to bring to the show !!!!!!!!!!!!!!!

They do have one stop shopping video pizza gas & what ever a good friend owns a piece there one bus all grades fire house fill before you go water freeze

4- valve has a direct wire to solenoids not like 2 valves with the brass contacts that usually fails. Push the tops down to see if they work.while engine is running be safe

Horse & OX carts fear and strengthen and preserve so they last this long.

Been ask by the Coast Guard several times at different ports, Been to the Groton CT sub base had to get out of the cab while in inspection line to let things air -out 6- of them didn't like that well they went through the cab under the truck OK pull up go inside get your paper work back I said they didn't look in side the dump body new search every thing stop for a while ya they got a little gizmo plug card in and check your thumb print some terminals are having a hard time finding qualified truckers to achieve that goal we wont mention !!!! The cost is 175.00 but if you have a hazmat endorsement it is a little cheaper and last 2-years and takes 4-6 weeks after applying