Back In Black Pulling
-
Posts
1,040 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by Back In Black Pulling
-
was told there is a tool to reserfice the cup the line go s in never could find one , had some trouble with a couple of mine used a drill bit with same angle as end of line to clean them up, just lightly run the bit in the cup and make sure you suck out the hole. i have one of those things my wife used to suck the snott out of the babys nose or there could be dirt lodged in there or the orings are in the wrong grove -
-
E9 top end assembly/sealing tips?
Back In Black Pulling replied to wrenching4life's topic in Engine and Transmission
If you had the heads off go over your final torque of 220 lbs about three times -
Looks like it should be warm with that thick blanket. Got around 12''
-
I know 419 is bad whole way Scheafferstown. I was at the shingle plant in Myerstown going in circles.
-
20 hrs yesterday another 9 today
-
Well what ever she was doing hope she was having Fun
-
Ran out of pipe
-
Tab at turbo bolts on the valley bolts , just L shaped flat stock. other end can be hooked right in to hole in gov arm. Use to have a little one on the pedal where the cable attaches that would help to , depends how stiff you like your pedal.
-
E-9 block needed
Back In Black Pulling replied to 88RD688S's topic in Antique and Classic Mack Trucks General Discussion
Still running today made little over 1000 HP with it. -
E-9 block needed
Back In Black Pulling replied to 88RD688S's topic in Antique and Classic Mack Trucks General Discussion
What Rick did to one of mine was cut out the counter bore and put in this hard Stainless ring then machine it , can even see it once he is done. He did every hole in my one E9 , common practice back in the day i was told. -
E-9 block needed
Back In Black Pulling replied to 88RD688S's topic in Antique and Classic Mack Trucks General Discussion
Contact Rick Riddle at Pa Truck Centers in Wrightsville Pa he can fix the counter bores , or he could at one time. -
Going to
-
Bell housing has multiple holes in it so it can be up righted , not sure about front mount , been a long time.
-
Call Dave Greek at Susquehanna Truck Service 717 284 3760 , Bid KT guy he can tell you anything you want to know.
-
It's Propane , Real Nice Kid
-
Seen on Facebook
-
Could call Antrim Diesel for some ideas 717 597 7963
-
Did you get the air lines switched or pinched ?
-
Hot Rod Mack
Back In Black Pulling replied to j hancock's topic in Antique and Classic Mack Trucks General Discussion
-
Hot Rod Mack
Back In Black Pulling replied to j hancock's topic in Antique and Classic Mack Trucks General Discussion
Was a 5 year project , fenders are mounted with square tubes like a reese style hitch to get to the motor when needed . -
http://www.exceedcms.com/ha/product.php?g=18&p=&id=7736/1985MACKModelRW713TandemAxleTruckTractor
-
Did he take his Pete up this year? How did do with it? Anybody know whats in the R ?
BMT Forum Logo
