Noid93

It has been a contiuously been a problem on my truck with the plastic on the slip yoke splines breaking and pushing out. How important is it, what is its purpose, and how bad is it to run it without??? Thanks for your help and info... CURT Noid93

My 97 CH had a snap ring in two pieces in the transmission oil when i drained it last. Between the last two changes it started to engage both reverse and 1st if you took it out of reverse while it was not stopped or had some sort of torque on the trans(not stopped without the clutch brake engaged for example). Obviously its in the sliding gear i belive(the snap ring was about three inches in diamiter). If it is in both gears and rolls a little, it will not come out of first with the stick without being pulled/pushed a very short distance(two inches or equal to the amout it rolled). Any quick fixes, has this happend to anybody else, and anyone with a used or fresh reman t2130 or t2180?? Thanks for your time and help guys.. Curt Noid93

If anyone wants more out of the 1993 to 1997 v mac engines, I recommend the blixxton mac module. I use it on my 97 ch 613 that is factory at 400 hp. For $300(http://www.performancepartsdepot.com/)(click heavy equp, and then more info blow the ag tractor listings), i have got great power. Not sure on specific numbers but blixxton claims 30% more power and that would put me at 520hp. (percI know thats hp and not torque, but it pulls great. 80000 lbs on my truck pulling grain wagon and it just moves. Just got 6.5 mph pulling fertilizer in the hopper today whit two hills with passing lanes (each about 1\2 mile long) and never pulled out of 10th gear on my 2130 13 speed trans. I walk on c12 cats like a DOG should. :bmod1: Hang with the big blocks but cant say i pass any thing over 500 hp in the hills. Hey its only 12 liter. THERE IS NO REPLACEMENT FOR DISPLACMENT!!! I really like my module. Check out this post also... http://bigmacktrucks.invisionzone.com/inde...?showtopic=2425 This is the rig that Maxville is talking about(a few posts up)

If you are looking to do a V-mack or V-mackII, I have used the Blixxton-mac. Buy from http://www.performancepartsdepot.com/ They are the cheapest around for the 1993 to 1997 e7 v-mac engines. 300 bucks got me one half to one mpg, real noticeable power, and great satisfaction on my 1997 ch613 that came factory at 400hp. (on the website, click hevy equipment vehicles, click more info below the (AG) tractor listings... any more questions let me know... :bmod1: (plugs in inline on pump harness)