Jump to content

MACKTRUCKS4

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    648

  • Joined

  • Last visited

 Content Type 

Everything posted by MACKTRUCKS4

  1. MACKTRUCKS4
    The trans that locks in low range is the 12 speed. The 6 speed should NOT be used to split every gear except first. The bearing in the trans that is used for low range is NOT designed to spin at higher speeds and the bearing ends up failing. I am not sure if there is a 6 speed that is an overdrive..
  2. MACKTRUCKS4
    The one I saw was all together, looked sharp. I was going to turn around and get a picture but I don't like doing that without permission.
  3. MACKTRUCKS4
    https://www.google.com/maps/@41.562258,-75.875614,3a,75y,249.43h,79.63t/data=!3m4!1e1!3m2!1sc7TSKUpjlz4t27xeuKcnSg!2e0?hl=en Does anyone know this truck? I was on Route 6 in Factoryville, Pa. and spotted this sharp looking dark red Superliner. Sign on the business was Dobrinski truck and trailer repairs.
  4. MACKTRUCKS4
    Have you tried changing the door seal? The driver's door get used 99% of the time and opening and closing it often puts more wear on the seal. It mat not look bad, but maybe enough not to put pressure on the door edge when closed.
  5. MACKTRUCKS4
    There is tools to help remove the cam, They are plastic rods with magnets on the end to hold the lifters up away from the cam and a rubber ring that slides down against the head or block if the heads are off. Also a set of plastic protectors that wrap around the cam that protect the bearings. They snap on in two locations to make the lobes the same size as the bearing journals. Grease on the lifters did not work for me, as soon as a little bit of oil gets on the lifter, down it comes. Magnets worked best.
  6. MACKTRUCKS4
    I think I can do something with that but might need a bigger hammer than the one that's laying on the floor. LOL. Just go to my gallery for pictures of my trucks. The 94 has a burnt cab but good drive train. The 00 was laid on its side, new cab, hood and other small items. The 87 Superliner was a complete motor job, it came home on the lowboy. The 88 Superliner under construction is under this topic:http://www.bigmacktrucks.com/index.php?/topic/35418-saving-super/ n I bought a spare E9 motor from a guy out by you in Finlay. He had a Superliner with a V8 and sold it but the buyer didn't want he spare motor so I bought it for a spare.
  7. MACKTRUCKS4
    Very nice. I too enjoy the same challenge. Did my 2 RD's, My V8 Superliner, and in the process of doing my second V8 Superliner. I'm looking for a Granite to do next.
  8. MACKTRUCKS4
    Do you have air ride on the rears? Air ride does not fair well off-road. Hub-pilot or Budd can be changed easily but spokes need to have the hubs changed.
  9. MACKTRUCKS4
  10. MACKTRUCKS4
    I picked up a 30lb. bottle at Sams last summer for around $88. No license needed.
  11. MACKTRUCKS4
    I've had a few over the years but never seen a pto/pump rear mount. I have the side mount combo on my tri-axle and like you said, I don't think there would be enough room. My superliner with a 12 speed has the rear mount but the pump is mounted back on the frame with a short shaft.
  12. MACKTRUCKS4
    I wonder where this truck has been hiding the last 11 Years? Full chrome duel exhaust right down to the flex pipe by the trans. I'm thinking high 80's, low 90's
  13. MACKTRUCKS4
    It took me a while but I found Doug's info in the Wiki files. Thanks Mike
  14. MACKTRUCKS4
    Yes, send me his contact info.
  15. MACKTRUCKS4
    Does anyone know who sell stock looking chrome or stainless front bumper and grill guards to fit on my B755?
  16. MACKTRUCKS4
    http://www.wattstruckcenter.com/store/index.php?route=product/product&path=59_70&product_id=354 Watts sells blank plates once you get your numbers.
  17. MACKTRUCKS4
    Also, thanks for reminding us of what summer looks like. LOL
  18. MACKTRUCKS4
    I ran into that problem when I rebuilt my E9. Drove me crazy. Finally took it to a mack deal, turns out I "over torqued" the fuel lines and it crimped the ends. Smoked like crazy. New fuel lines, end of problem. Easy to check.
  19. MACKTRUCKS4
    Name: B755 Date Added: Owner: MACKTRUCKS4 MACKTRUCKS4
  20. MACKTRUCKS4
    felicello122, If he doesn't buy it, I might be interested. Do you have a picture of it?
  21. MACKTRUCKS4
    Truck???? Well if she was 20 at the time, 30 years go by, that would make her around 50, that's old!!! Wait a minute, she would still be younger than me. Damn it!!!
  22. MACKTRUCKS4
    Will a 866 flywheel work on a 864? One for sale on ebay, was thinking on picking it up for a spare but not sure if it's the same.
  23. MACKTRUCKS4
    http://www.ebay.com/itm/Mack-E9-push-rods-and-injectors-/111604917390?pt=Other_Vehicle_Parts&hash=item19fc2be48e&vxp=mtr
  24. MACKTRUCKS4
    Maybe the 1 in front is suppose to be a $ sign, making it $7,500.00. Just saying
  25. MACKTRUCKS4
    http://www.pioneeraggregates.com/GarageFleet.html Not sure if this are the trucks you are talking about. I haul once and a while from White Haven and these are the only trucks of theirs I see.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...