Jump to content

Dirtymilkman

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,244

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by Dirtymilkman

  1. Dirtymilkman
    I know he goes around to shows and delivers if the logistics work out right.
  2. Dirtymilkman
    What is horsepower on that engine??
  3. Dirtymilkman
    Take a look at these. All built in USA to original size as old arcades. These are awesome. Even takes quarters. https://minneapolis.craigslist.org/ram/eld/d/new-ms-pacman-galaga-cocktail/6481522578.html
  4. Dirtymilkman
    Sharp!
  5. Dirtymilkman
    I was in the Tennessee plant back in 1998. After I toured that plant I told myself I'd never buy a peterbilt truck. It was so unorganized, dirty and it seemed nobody wanted to work. The only guys that were taking a little pride in what they did were the guys making the fuel tanks. The rest didn't care if they were there or not. The dealerships had to have done a lot of prepping on the new rigs. Because they were terrible from what we saw sitting in the lot waiting to be shipped out.
  6. Dirtymilkman
    They weren't similar before. But now, it's a Chevy/GMC type thing.
  7. Dirtymilkman
    Check eBay for the turbo. I picked them up on there before.
  8. Dirtymilkman
    A 4x4 8 feet long through the cab with doors open. Then pick up on ends
  9. Dirtymilkman
    Or an E9
  10. Dirtymilkman
    They can keep it.
  11. Dirtymilkman
    They can't even use a real photo down under?
  12. Dirtymilkman
    The dealer here has those on hand.
  13. Dirtymilkman
    On a uphill climb at over 80,000 pounds on the interstate, my 460 can pass my mp10. The mp10 is set at 525hp
  14. Dirtymilkman
    When I bought my last new one I got a custom binder that was made for my truck. It had all the coverages and restrictions listed in it. Maybe it's just a thing my dealer does? I got the extended exhaust after treatment, the harness and wiring and engine warranty for 5 years and it was around $7500. Probably saved me $25,000 in the last three months.
  15. Dirtymilkman
    My 460 with stock turbo and stage 2 injectors will push 44 psi. That's a CL so the manifold is a little bigger than a vision.
  16. Dirtymilkman
    Are there deer in Europe?
  17. Dirtymilkman
    A set forward granite is a sharp tractor!
  18. Dirtymilkman
    That is where you don't wanna be. Unless you have a snowmobile.
  19. Dirtymilkman
    Hahahaha hahahaha hahahaha hahahaha........ hahahaha hahahaha
  20. Dirtymilkman
    When I bought my 2001 cl new it was doing that. They put 4 water pumps on and the spacer kits. Still ended up snapping bolts. I finally called enough numbers and got engineering, they asked for my opinion. I told them it should have a plastic fan instead of steel. They sent out a new plastic fan and horton clutch and water pump. Mack installed, never had an issue in a million miles.
  21. Dirtymilkman
    If it's vibrating that sounds like injection cups.
  22. Dirtymilkman
    🤢
  23. Dirtymilkman
    If the truck is taken care of and kept up, it's definitely worth that. Check King pins, check the z-leafs for cracks between u-bolts, check cross members for cracks and rot, check axle housings for cracks and leaks and I would do an oil analysis and check coolant nitrates.
  24. Dirtymilkman
    ............with two guys in there, it sounded like there was nothing but pole in there. You should've came out for eelpout festival instead.
  25. Dirtymilkman
    Up here the "paccar" mx motor is dying. Lots of issues and lots of parts availability issues. I know of fleets going to strictly Cummins engines. One fleet of about 26 trucks has traded all paccar engine trucks off in the last two years. Another I know with a few hundred trucks is transitioning now to Cummins and also getting a few Mack's and internationals.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...