kscarbel2

Thank you Vlad.

BBC / April 7, 2017 According to the War Powers Resolution of 1973, the president "in every possible instance shall consult with Congress before introducing United States Armed Forces into hostilities or into situations where imminent involvement in hostilities is clearly indicated by the circumstances". The president is required to confer with Congress until US forces are no longer needed. But the commander-in-chief is also given "leeway to respond to attacks or other emergencies" in a limited way, according to the Council of Foreign Relations. Senator Rand Paul said: "While we all condemn the atrocities in Syria, the United States was not attacked.” “The President needs Congressional authorization for military action as required by the Constitution." “Our prior interventions in this region have done nothing to make us safer and Syria will be no different.”

The standard FH is built with a traditional grille. D16-equipped FHs are equipped with the optional grille in the picture.

Ford to introduce China market Cargo heavy tractor at Shanghai auto show (http://autoshanghai.auto-fairs.com/general-information/). .

I like the demeanor of former UK ambassador to Syria Peter Ford. He doesn't point a finger and slam anyone, but rather he speaks with logic, reason and experience. .

Volvo Bus Press Release / April 3, 2017 Volvo Buses is now starting the global launch of its latest chassis powered by the 8-litre Volvo engine. The Volvo B8R and Volvo B8RLE replace the top-selling Volvo B7R and B7RLE, which saw a production run exceeding 40,000 units and sales in 65 countries. Higher power output, the same low fuel consumption, longer oil-change intervals and a high safety level are some of the features that characterise the new chassis models. The Volvo B8R and B8RLE have been marketed in Europe since 2013 and in 2017 Volvo Buses will continue rolling out the new models globally. Buses on the Volvo B8R chassis are already being built in India. This summer several Asian markets are in line such as Malaysia and Thailand, along with Australia, the Middle East, Africa and South America. “With the introduction of the Volvo B8R/RLE we are reinforcing our global offer with a modern and flexible product range that gives our customers even better scope for operations that boost life cycle cost-efficiency,” says Håkan Agnevall, President of Volvo Buses. Flexible configuration Just like their predecessor, the Volvo B8R and the low-entry Volvo B8RLE version are designed to form the foundation for both city buses and intercity buses, as well as tourist coaches and school buses. A robust structure using tried and tested components in the chassis and driveline create the prerequisites for high reliability and availability. The buses are also equipped with the Volvo Bus Electronic System, which means they are factory-prepared for future software upgrades. Fuel-efficient driveline The engine is the Volvo D8, Volvo’s own 8-litre common rail diesel producing 330 hp and up to 1200 Nm of torque. Despite a 40 hp increase in power, the new engine is at least as fuel-efficient as its predecessor. The oil change interval has been extended from 30,000 to 40,000 km in city traffic, and from 50,000 to 80,000 km for buses in long-distance operations. High level of safety The Volvo B8R and Volvo B8RLE were designed to meet high demands on driving properties, comfort and safety. The standard equipment includes features such as Volvo’s electronically controlled disc brakes and ESP (Electronic Stability Program).The Volvo B8R can also be specified with I-Coaching, a system that helps the driver drive more safely and fuel-efficiently by providing continuous feedback. The chassis will be built in the Volvo Buses factories in Borås, Sweden and Curitiba, Brazil, for local final assembly and bodybuilding. Facts, Volvo B8R and Volvo B8RLE Volvo B8R: Length 10.1–13.1 m. Width 2.4 m. Wheelbase 4.5–7.4 m. Gross Vehicle Weight (GVW) up to 19 tonnes. Volvo B8RLE: Length 10.2–12.5 m. Width 2.5 m. Wheelbase 4.5–6.8 m. Gross Vehicle Weight (GVW) up to 19 tonnes. Driveline: Volvo D8, in-line six-cylinder diesel engine producing 330 hp/1200 Nm in Euro 5 or Euro 3 configuration. Choice of several transmissions. Brakes and stability enhancement systems: Volvo EBS, ABS, Brake Blending, Hill Start Aid, Brake Assist, Volvo Electronic Stability Program (ESP), integrated hydraulic retarder. Driver’s station: Volvo’s ergonomically designed driver’s station, easy to view instruments and individual steering wheel adjustment.

Commercial vehicle rental company Hama Polska, a subsidiary of the DBK Group, has announced its purchase of 1,100 new Kogel semi-trailers for its DBK rental fleet. The order from Hama Polska comprised 900 new Kögel Cargo units and 200 new Kögel Mega semi-trailers to extend its rental services in Poland, Germany, Austria, Sweden and Spain. Under the umbrella of DBK Rental services, Hama Polska operates over 1,000 prime movers from various manufacturers, as well as a large selection of Kögel semi-trailers are available for long- or short-term rental. The company’s customer service programme includes maintenance and repair services in Poland and abroad, a tyre service and a mobility guarantee, with the provision of a replacement vehicle in the event of an accident of a breakdown. The 900 Kögel Cargo semi-trailers feature Kogel’s VarioFix perforated steel external frame equipped with 13 pairs of lashing rings for load-securing, each ring affording 2,000 kg of tensile force. The body meets the body stability standards of DIN EN 12642 Code XL, making any additional load-securing unnecessary for form-fitted loads. Thanks to the use of the standard Kögel integral roof tarpaulin, there are no straps left hanging down when the roof is open because these are integrated into the roof tarpaulin. This means that the straps cannot get snagged up when loading and unloading. An optional lateral steel bracket across the entire width and locking cam protection mounted centrally on the end plate of the frame are fitted as forklift protection. The individual accessories for each trailer also include five pairs of receiving slots at the rear corner posts, as well as a rain guard on the end frame for suitable clamp fittings with eyelets, a tarpaulin rope with two brackets on the front wall and many other features. The 200 Kogel Mega semi-trailers are ideal for conventional standard tasks as well as for use as a high-volume transport vehicle. The internal clearance height of three metres makes these high-volume units ideal for just-in-time business in the automotive sector. Loading and unloading stacked pallet cages is simple, thanks to the standard mechanical/hydraulic lifting roof. This increases the side and rear through-loading height to more than three metres. The standard Kögel integral roof tarpaulin also guarantees improved handling with an open roof. Thanks to the roof straps being integrated in the roof tarpaulin, sagging straps are a thing of the past. This eliminates the straps snagging on the load. Mega-trailers are certified in accordance with DIN EN 12642 Code XL .

Scania to showcase S500 in Brisbane Trade Trucks AU / April 4, 2017 The UK-specification prime mover will be the highlight of Scania's display at the Truck Show Even though the commercial launch of Scania’s S 500 series in Australia is "way off", the company is bringing an example of its New Truck Generation range for display at the 2017 Brisbane Truck Show. The Scania S 500 prime mover was launched in Paris last year and has won two accolades in Europe so far – the International Truck of the Year 2017, and 1,000-point European heavy vehicle comparison test. The UK-specification truck will be brought out only for the Truck Show and will return to Europe immediately after the show. Scania says it will conduct local market evaluation before launching the the New Truck Generation range in Australia. Scania Australia MD Roger McCarthy says the company decided to "fast-track the delivery of an example of the S 500 to Australia, even though the commercial launch of the New Truck Generation Scania range is still some considerable way off". "The truck on display is representative of a specification that could be offered to the Australian market once the New Truck Generation Scania is launched here," he says. The Scania S 500 on display will be shown in 6x2/2 configuration with a pusher axle (with single wheels) and rear drive axle with dual wheels. It has a 13.0-litre SCR Euro 6-compliant six-cylinder in-line engine, producing 500 hp (373 kW) at 1900 rpm, and 2550 Nm (1882 lb/ft) of torque between 1000 and 1300 rpm. The 500 hp engine drives through the Scania GRS905R direct drive gearbox, controlled by Scania Opticruise automation, which provides three performance modes (economy, standard and power). The Opticruise gear-changing is up to 45 per cent quicker than before owing to the adoption of a new layshaft brake. It is fitted with the latest high output R 4100D Scania Retarder, plus an exhaust brake, offering seamless deceleration while preserving the service brakes. The rear driven axle uses a 2.59:1 final drive ratio, reflecting the lower European speed limit for heavy goods vehicles of 85 km/h, and is equipped with a differential lock. The Highline model on display also offers additional headroom inside thanks to the cab’s completely flat floor. Scania S 500 also features ABS/EBS safety systems with advanced emergency braking, electronic stability control, adaptive cruise control, Scania lane departure warning, and the "world-first" driver’s side window curtain airbag. Other features include: climate control, electric roof hatch, a 1000mm wide expandable lower bunk, a 700mm upper bunk, Scania Communicator, LED head and tail lamps, LED daytime running lamps, and LED fog lamps. The Brisbane Truck Show will also feature a selection of the current generation of Scania prime movers including the current flagship, the R 730 V8, a G 480 prime mover and a P 310 8x2 rigid. "We will also be demonstrating the advantages of Scania Maintenance with Flexible Plans, which combined with Scania Optimise, provides fleets and owners with a deep and user-friendly insights into the most cost-effective and efficient way to maximise the profitability of their Scania assets," McCarthy says. "The Scania stand at the Brisbane Truck Show will provide all truck operators with the perfect opportunity to gain a clear understanding of efficient, sustainable, safe and driver-friendly trucking. .

PBS: All axles and payload Big Rigs / April 7, 2017 Making use of the efficiencies of Performance Based Standards (PBS), Sydney company Bedrock Quarries has put to work a nine-axle combination low tare combination that is reaping significant payload increases. The Mack Super-Liner Tridem is powered by Mack's MP10 685hp engine and the back end is bogey drive with a liftable pusher axle. The Sloanebuilt tipping body and five-axle trailer give low tare while having the strength to handle quarry and delivery work. As quarries in the Sydney region have become depleted, gravel supplies must come from further afield and the Bedrock operation hauls material from New South Wales' Central and Southern Coast districts. Traditional truck and dog combinations had a payload of 33 tonnes or less, the new PBS rated combo has increased payload to 48 tonne. "That's about one and a half of the previous truckloads, and that's a huge advantage for our business,” says Mick Colley, director of Bedrock Quarry Products and Bulk Transport. "We're constantly looking at ways of increasing our productivity.” Bedrock has a Mack fleet because "quarry work can be rough and Mack is combining their toughness with the latest in innovation and technology, which means they're the obvious choice for my business,” Mick reckons. Through the Performance-Based Standards (PBS) scheme, VCV Sydney West offered Bedrock the option of higher productivity and the best possible payload through efficiencies now available through PBS. Mack Trucks Australia vice-president Dean Bestwick said Mack Trucks was excited and proud to continue to partner closely with Bedrock Quarry Products and Bulk Transport. "Bedrock has made the decision, time and time again, to carefully select Mack to build their trucks. "Their fleet of 13 is comprised entirely of Mack trucks, including three three-axle dogs, five PBS four-axle Dogs, two PBS five-axle dog trailers, one 25 metre B-Double, an eight-wheeler rigid and the newly acquired Super-Liner Tridem.” "It's really satisfying to produce customised trucks that are a perfect fit for the job with unmatched reliability, durability and application excellence; ultimately increasing productivity and profitability for our customers,” Dean said. As other customers also look to increase payload, Dean said the delivery of the PBS Mack Super-Liner Tridem showcases Mack's commitment to application excellence while using both the latest in truck technology and matching it with innovative possibilities that have arisen under PBS. "Bedrock Quarry Products and Bulk Transport prides themselves on prompt, efficient and reliable transportation of quarry products to each and every customer and Mack stands behind our trucks and our customers in everything they do.” The Mack Super-Liner is fitted with the liftable pusher axle with HLM2 suspension, to allow reduced tyre wear and drag when empty running. The National Heavy Vehicle Regulator (NHVR) approved and PBS compliant combination will allow Bedrock Quarry Products to carry an estimated combined payload of 48 tonne, across an overall vehicle length of just over 24 metres. The Super-Liner features a custom Sloanebuilt Trailers aluminium tipping body and five-axle dog trailer, ensuring the lightest tare weight while still achieving maximum strength and durability. The Mack Super-Liner Tridem tipper-dog PBS Combination Engine: Mack MP10 SCR 16 litre 685hp @2300lb/ft torque Transmission: Mack mDrive 12 speed overdrive AMT Front axle: Mack FXL 14.6 (14,600 lbs) Rear axles: Meritor RT46-160GP with HLM2 pusher Brakes: S Cam with Centrifuse brake drums GVM: 68.5 tonnes Cubic Capacity: 22.1 cubic metres Trailer: Five -axle PBS compliant by Sloanebuilt Trailers. .

Owner/Driver / April 4, 2017 A record 38 trailer manufacturers will feature at the 2017 Brisbane Truck Show, a feat attributed in part to the success of Australia’s PBS scheme. Despite the last of the automakers packing up shop, Australian truck and trailer manufacturing industries are burgeoning as our need for higher-productivity vehicles evolves. This year’s Brisbane Truck Show highlights a distinct uplift in trailer manufacturing in Australia, resulting in a record number of exhibitors. The show will host 38 innovative trailer manufacturers, all of whom are finding great success locally despite the presence of low-cost imported trailer options. Show organiser Heavy Vehicle Industry Australia (HVIA) attributes a lot of this success to the maturation of the National Heavy Vehicle Regulator’s (NHVR) Performance-Based Standards (PBS) scheme. HVIA chief executive Brett Wright says PBS offers a specialty area of manufacturing that many trailer builders are taking advantage of. "PBS is an enabler of innovation and productivity," Wright says. "Because PBS applications are by their very nature bespoke, it makes it possible for hundreds of trailer and body builders to succeed creating niche products, where the supply of more generic products becomes a challenge of staying cost-competitive. "Australian trailer productivity is the envy of the world over, with the safety record of our B-double’s to the amazing capacity of our road trains and B-triples. "Our Performance Based Standards scheme allows innovative engineering to achieve much greater productivity from trailers with even greater safety benchmarks." One of a kind Wright points out that Australia is home to a burgeoning truck and trailer industry, in part due to the unique requirements of trucks in service down under. "Australia is home to three major truck manufacturing plants and hundreds of the world’s most innovative trailer, body, component and equipment manufacturers," he says. "You couldn’t have a more professional heavy vehicle industry than we have in Australia, delivering innovative solutions with world-class design, engineering and manufacturing." A competitive hurdle for manufacturers in Australia is the challenge of competing with low-cost imported trailers; however the PBS scheme creates niche opportunities. The NHVR’s chief engineer, Les Bruzsa, notes that not only do PBS-approved combinations provide opportunities for local trailer manufacturers, they also reduce the number of trucks on the road. "PBS vehicles deliver improved productivity and safety through innovative vehicle design," Bruzsa says. "Simply, this means fewer trucks on the road and overall safer vehicles to transport more than two billion tonnes of freight around Australia each year." Pay-off Custom trailer builders, like WA-based Bruce Rock Engineering, are investing in the research and development of high-productivity trailer options and it’s becoming a large component of their business. Director Damion Verghoot explains that the decision to invest in PBS-approved trailers has paid off despite the lengthy process. "We put a lot of work into the PBS trailers probably three years ago now," Verghoot says. "With the super quads, super triples, research and development is important. "But that’s really come to fruition and paid off in the last 12 months. "We do everything in house and the amount of effort we put in was huge, so the wheels were slow to turn but it's kicked off now." As the PBS scheme evolves, it should allow for even more local manufacturing options, despite concerns about overseas manufacturers taking aim at the custom side of the market. "It’s probably a hard thing, because if PBS becomes more of a norm, that’ll lead itself to more numbers and possibly more overseas manufacturing," Verghoot says. "But we’ve put well over 200 PBS trailers on the road so far, and I think Australia’s trailer industry is innovative enough that there will always be a market for locally manufactured PBS gear." The NHVR’s PBS data confirms the outlook of trailer manufacturers, with an impressive 1397 combinations approved last year as well as the relative monopolisation of the dog trailer market. "PBS has been growing at a rate significantly higher than predicted and the number of PBS combinations almost quadrupled since 2013 when the NHVR took over the management of the scheme," Bruzsa says. "In respect to PBS within the domestic trailer manufacturing sector, we saw a significant growth in the dog trailer segment with more than 90 percent of all new 4-axle and 5-axle dog trailers being PBS approved in 2016." Burden While the regulator has taken the PBS scheme to great heights, the process still involves access issues according to the HVIA, which, if ironed out, could lead to further spikes in trailer manufacturing. "The regulator has a challenge working with road managers to allow these combinations on their local networks, however, the selling point is that higher productivity combinations reduce truck movements and they are putting an even greater onus on safety," Wright says. On top of access concerns, the HVIA has called on the regulator to address PBS-related safety concerns. "It is in everyone’s best interests that the PBS scheme continues to grow," Wright says. "It allows the transport industry to move freight far more efficiently. "The payback, however, has to be adhering to benchmark safety requirements. "HVIA has identified that the PBS scheme is at risk given the age loophole and low, outdated braking standards required for approval. "Should at any point we witness a serious accident involving one of the poorer performing PBS vehicles there is a high risk that the scheme could be negatively impacted." For Queensland-based tanker manufacturer, Holmwood Highgate, PBS trailers account for a third of their business. Sales manager Ian Williamson says the quality of locally manufactured custom trailers is a big draw card for buyers. "We’re local and we’ve been around since 1950, so quality is a big factor for us," he says. "The Australian trailer manufacturing industry is always going to be there because a lot of people out there want quality and they don’t want the low-quality issues." While a large portion of Holmwood Highgate’s work is already PBS related, Williamson says it expects it’ll increase further as the process is simplified. "At the present time PBS accounts for probably about 25 to 30 per cent of our work," he says. "We expect that to improve but the biggest problem with the PBS scheme at the present moment is there is a lot of red tape that comes with it. "A lot of people are starting to look at PBS combinations in the 26-metre B-double and 30-metre A-double space, as well as with rigids and dogs. "That requires a lot of development, but we’ve got the approvals." The NHVR is optimistic the PBS scheme will continue to improve manufacturing prospects, safety, and productivity, benchmarking Australian road transport against the rest of the world. "It has now been acknowledged by most of the manufacturers that PBS is the most progressive heavy vehicle design scheme in the world," Bruzsa says. "In terms of trailer design and component selection PBS sets a higher benchmark for manufacturers and opened up new opportunities for designers. "It is likely that the scheme will continue to grow at a strong rate. "It will be exciting to see how far the boundaries of vehicle innovation can be pushed to boost vehicle productivity without experiencing a reduction in safety. Breakdown by state of PBS applications, amendments and variations approved in 2016 Victoria 60% Queensland 19% New South Wales 15% South Australia 4% Tasmania 1% Big productivity: Less trips, bigger loads Sydney-based Bedrock Quarry Products & Bulk Transport has made the move to PBS-approved truck and trailer combinations, with the aim of rolling over its entire fleet to PBS rigs. Director Mick Colley put his 25 years of transport industry experience to use when finding a way to tackle an increasingly competitive industry and growing compliance and operational costs. The solution? Pull more, with fewer trucks. "The solution is less truck movements," Colley says. "When, for instance, you’re looking at a PBS quad-dog compared with a three-axle dog, you can move the same amount with five loads in a quad-dog or six trips in a three-axle dog. "An extra tonne is worth around $12,000 per year to the company, so if you carry an extra six to seven tonnes in a load then that’s a big difference." The company first started running PBS-approved trucks three years ago and since that time, Colley says the fleet of high productivity vehicles has afforded efficiency not possible with off-the-shelf setups. "In 2014, we started getting involved with PBS, and we’ve now got nine PBS vehicles," he says. "We have five quad-dogs, three five-axle setups, one Mack Super-Liner Tridem pulling a five-axle and then an A-double that will arrive sometime in April. "We’re still doing the same rates we did on three-axle dogs, but you can do more. "We’ve got other ideas and the regulators are very keen on looking at our ideas to reduce truck movements. "Within two or so years, we think we’ll be a 100-percent PBS fleet." .

California fuel taxes are headed up, way up Keith Goble, Land Line (OOIDA) / April 7, 2017 The California Legislature voted on Thursday, April 6, to approve a 10-year, $52 billion transportation funding deal. Professional drivers are pegged as major contributors for the plan via a 20-cent diesel tax increase. By a one-vote margin the Senate voted last night to approve the bill. The 27-11 vote cleared the two-thirds supermajority necessary to advance. Assembly lawmakers followed suit shortly thereafter. The chamber needed 54 favorable votes to secure passage to the governor’s desk. The final tally was 54-26 to adopt. Democratic Gov. Jerry Brown and leading lawmakers of his party unveiled the funding plan in the past week. The deal is estimated to raise $5.2 billion annually for state and local roads, trade corridors, and public transit. The funding package includes a mix of higher taxes and fees. It is described as a “first step” toward making roadways safer and providing a boost to the state’s economy. Assemblyman Rudy Salas Jr. of Bakersfield was the lone Democrat to vote against the bill. He cited concerns about additional tax burdens on his constituents. “The families I represent drive too far to jobs that pay too little.” Assemblyman Mike Gipson, D-Carson, acknowledged the bill is not perfect. However, he said it ensures the state is moving forward. “Senate Bill 1 passes the smog test,” Gipson commented following the vote. Republicans at the statehouse, including Sen. Ted Gaines of El Dorado, said funds already available to the state were a better option. “And how are the people supposed to believe that this money will actually go to transportation? This state is already diverting a billion dollars in weight fees away from our roads every year.” SB1 would raise nearly $3.8 billion annually mostly via increases in the gas and diesel tax rates. The state’s current tax rates are about 38 cents per gallon, according to the American Petroleum Institute. The excise components making up the tax rates are 27.8 cents for gas and 16 cents for diesel. The bill from Sen Jim Beall, D-San Jose, would increase the excise rate on gas by 12 cents to raise $24.4 billion. The excise rate on diesel would be increased by 20 cents to raise $7.3 billion. The diesel money would be designated for freight, trade corridors and goods movement. In exchange for collecting more in excise taxes, California’s current collection method for fuel taxes would be abandoned. No longer would the state Board of Equalization annually adjust the fuel tax rates. Instead, price-based tax rates would be restored. In addition, the 1.75 percent sales tax applied to diesel purchases would be increased by 4 percent to 5.75 percent. The increase is estimated to raise $3.5 billion. Revenue from the diesel sales tax increase, however, would not directly benefit trucking. The money would be deposited into an account for transit and intercity rail projects. The Owner-Operator Independent Drivers Association supports efforts to raise revenue for transportation work in the state. However, the group opposes any plan that calls for truckers to foot more of the responsibility to help bail the state out of its funding hole. Additional components in the funding plan would increase annual vehicle registration fees up to $175 and apply an annual $100 fee for zero-emission vehicles. The fees would raise $1.3 billion. All tax and fee rates would be indexed to inflation to allow for increases in future years. In an effort to appease truckers, another provision in the bill would restrict future regulations on emissions related to commercial vehicles. Critics say that exempting trucks from clean air rules has no place in a package to fix roads and improve transit. Beall said earlier in the week at a hearing that the provision would “do no harm.” He said it is merely intended to help an industry that would be heavily taxed. Also included in the bill is reference to SCA2/ACA5 – a proposed constitutional amendment to be included on the June 2018 ballot. Voters would decide whether to ensure all revenue is spent for transportation purposes. The Legislature approved the constitutional amendment question after adding language to include truck weight fees in the protection. Since 2011, weight fees have been diverted from roads to the state’s general fund to pay down transportation-related general obligation bonds. The fees collected top out at $2,271 per truck.

Reuters / April 7, 2017 Germany's Daimler will offer workers at its Mercedes-Benz trucks business voluntary redundancy as it seeks to lower annual costs by 400 million euros (US$424 million) through a mix of budget and headcount reductions, a company spokesman said. The group agreed with labour representatives to launch the redundancy programme on May 1 to cut white-collar staff positions, the spokesman said, confirming a report by German daily Stuttgarter Zeitung. Production workers will not be affected, he said. "The decision was not easy, but considering the volatile truck market and tough competition we did not see any other choice," he said. He said the company had no target for how many jobs would go as part of the programme. The paper had said Daimler aimed to reduce its staff of 15,000 by a total of between 1,000 and 2,000 through measures including the voluntary redundancy programme, internal transfers, early retirement and attrition.

On the move again, the 200-ton railway gun that could fire a shell 13 miles Breach Loading 18inch Rail Howitzer will travel 300 miles to the Netherlands Gun will be in exhibition to mark end of Spanish War of succession in 1713 Short range weapon was last used as coastal defence in Second World War The Daily Mail / March 25, 2017 Britain's largest surviving artillery piece is due to make an historic journey to the Netherlands to mark the 300th anniversary of the Treaty of Utrecht. The Breach Loading 18-inch Rail Howitzer gun serial number L1 is one of just twelve railway guns left in the world. It was manufactured by the Elswick Ordnance Company set up in 1864. The gun, which weighs 200 tons, has been on display at Larkhill, Wiltshire, since 2008 but today it began its 387-mile journey to the Dutch Railway museum. There, the gun will be displayed as part of their War and Peace exhibition to commemorate the end of the Spanish War of Succession in 1713. In preparation for the move the artillery piece, which was in service between 1920 and 1945, has undergone restoration work after a campaign to return it to good condition. Sergeant Maj Nick Shipton told the BBC it took up to five hours to get the gun off the carriageway and onto a truck. 'It's a complex beast. The size, weight and the fact that it has been together for a few years causes its own issues. But we've done a lot of pre-preparatory work to make sure it can be split,' he said. 'It's most certainly going to be an abnormal load.' Howitzer artillery pieces typically have relatively short barrels and use comparatively small propellant charges to propel missiles high into the air. The barrels were built during the First World War but were completed too late to see action. They were later used to test the accuracy of the 18-inch Howitzer in Shoeburyness, Essex. Their relatively short range of around 13 miles meant that after the First World War the five guns produced were put into storage because longer range weapons were needed. The Howitzer's range was insufficient for cross-Channel firing and hence it was never fired in action. In late 1940 one 18-inch howitzer was brought out of retirement and fitted onto its 95 ton proofing sleigh. It was deployed on the railway mounting Boche Buster which had been used in the First World War to carry a 14-inch gun. The gun was stationed at Bishopsbourne in Kent on the Elham to Canterbury Line as a coast defence gun. It remained there until 1943 as a precaution against possible German invasion. Barrel No L1 was the only one of Britain's railway guns to avoid being dismantled and scrapped in the early 1960s. It was was sent back to Shoeburyness to test fire the efficacy of 1,000lb Bunker Buster Bombs before finally being retired in November 1959. The Howitzer and proofing sleigh were moved to Woolwich, the then home of the Gunners, in June 1991, where it was gifted to the Royal Artillery Historical Trust. After 17 years it was moved to Larkhill in 2008. In the Netherlands the gun will form the centrepiece of the exhibition, to open on March 30 in a grand official opening ceremony involving many dignitaries. It will remain there until September this year, before returning to the UK to a location yet to be confirmed. BL 18-INCH HOWITZER STATISTICS The Breach Loading 18-inch Rail Howitzer gun serial number L1 was in service from 1920 to 1945. It was one of five made in Britain by the Elswick Ordnance Company. It weighs nearly 200 tonnes and its barrel measures 52ft. The gun's shells weighed nearly 180 stone. Elevation varied between 0° - 40° and its effective range was 13 miles. It takes five hours to shift the gun from its carriageway over to the truck which transports it. .

Transport Engineer / April 7, 2017 Trailer supplier Cadwallader has taken delivery of the first production Thermo King SLXi-300 refrigeration system, which has been fitted to a Bizien 13.6m refrigerated trailer in its hire fleet. Oswestry-based Cadwallader operates a 350-strong refrigerated trailer hire fleet and the 2017 spec Bizien triple-axle trailer with the Thermo King SLXi-300 refrigeration system is being used as a demonstration unit across the UK. “We were really excited about the prospect of getting the newly launched SLXi into our fleet as soon as possible,” says Mark Pritchard, Cadwallader’s operations manager. Launched last year at IAA in Hanover, Thermo King’s SLXi system can deliver up to 20% fuel savings. It is the first fully telematics-enabled transport refrigerated trailer unit to include Bluetooth connectivity as standard, delivering full visibility of the unit and load condition using Thermo King’s new TK BlueBox communication device. .

Commercial Motor / April 7, 2017 Western Commercial’s Bellshill branch has supplied Inverclyde Council with 11 Mercedes-Benz Econics refuse trucks. All are 6x2 Econic 2630 models with standard-fit Allison automatic gearboxes and straight-six engines that produce 299hp. Eight have Faun compactor bodies and Terberg bin lifts, while the remaining three are fitted with Titan bodies and CP Davidson lifters. The trucks pick up domestic refuse, dry recyclable and garden waste in wheeled bins, and make traditional collections from tenement properties in Glasgow. Inverclyde Council maintains its vehicles in-house but gets regular parts deliveries from Western Commercial. Workshop technicians at the council benefit from product training sessions delivered by the dealer’s service team. Inverclyde Council’s transport and waste collection team leader Jim Bradley said it was the experience of running four Econics, purchased five years ago, that convinced the council to place the latest order. “Those vehicles were extremely reliable and well-built with highly competitive running costs”, he said. “The support we receive from Mercedes-Benz Trucks and Western Commercial has been first-class, the dealer’s sales executive Robert Snodgrass is a municipal specialist so he understands our requirements and the tendering process.” .

Commercial Motor / April 6, 2017 Suffolk recycling specialist Indigo Waste Services has added the first rear-steer Renault Trucks Range C 8x2 into its fleet due to a pressing need for more volume. The high specification 32-tonne C430, supplied by Thompson Commercials (Boston) on a seven-year full repair and maintenance contract, is fitted with a 20-tonne Palfinger PK17001 crane. It includes an extra bottle bank attachment and Webb steel fixed side tipping body with high partition, all supplied by Webb Truck Equipment, Acton, Suffolk. The new C430 is expected to clock up to 100,000 km per year operating across East Anglia on Indigo’s new contract with Palm Paper, collecting cans, plastics, glass and mixed paper from a well-known supermarket’s recycling bins. Indigo Waste’s MD Gary Lee said: “I needed a bigger truck that could give us more capacity. We’ve been running Ts and Ds for a while and we’ve always been delighted with the trucks and the service received from Thompsons. “Paper is dense with a greater volume to weight ratio, so I opted for the Renault Trucks eight-wheeler this time. “The C430’s rear steer also gives us a better turning circle and more manoeuvrability when getting in and out of the tight recycling areas.” .

Commercial Motor TV - sponsored by DAF Trucks / April 7, 2017 - New emission taxes for hauliers - Transport managers need to remain vigilant when nominated for O licence - Vosma Vervoer, the South African haulier with a parrot named Polly .

Truck & Driver / April 7, 2017 An Iveco Stralis NP (natural power) has completed the 850-mile journey from John O’Groats to Land’s End on a single fill of liquified natural gas (LNG). The 4×2 tractor, which Iveco refers to as “Europe’s first long-haul gas-powered truck”, was equipped with the 8.7-litre Iveco Cursor 9 natural gas engine, matched to a Eurotronic 12-speed transmission. It delivers 400hp and 1,700Nm, and has similar driving characteristics to an equivalent diesel-powered truck. The New Stralis NP operated with a laden tri-axle trailer for the first 808 miles, only dropping the trailer at a truckstop in Redruth as the Land’s End Visitor Centre cannot accommodate 13.6m trailers. Truck & Driver’s editor in chief, Will Shiers, who was behind the wheel of the 30-tonne artic for much of the drive, says: “Gas-powered trucks of old were about as appealing as a dose of the clap, but this is different. It performs well and drives nicely. It’s a cleaner, cheaper, viable alternative to diesel. “The red light came on the fuel gauge about 50 miles from Land’s End, so it was touch and go whether or not we were going to make it. The last 10 miles were about as stressful as Christmas with my mother-in-law.” Although the UK has Europe’s most comprehensive LNG filling station network, the closest site to John O’Groats is Carlisle, and the nearest to Land’s End is Bridgwater, meaning the truck had to be low-loaded to and from the start and finish points. .

Renault Trucks Press Release / April 7, 2017 On 6 April 2017, as part of a ceremony at the Renault Trucks manufacturing site in Bourg-en-Bresse, Thierry Pigeon, Managing Director of Groupe Pigeon, received the keys to a C430 8x4 truck from Renault Trucks President Bruno Blin. This particular vehicle was the 800,000th truck produced by the Renault Trucks assembly line in Bourg-en-Bresse, in operation since 1964. On Thursday, 6 April 2017, Renault Trucks President Bruno Blin gave Thierry Pigeon, President of Groupe Pigeon, the keys to the 800,000th truck produced by the Renault Trucks plant in Bourg-en-Bresse. This 800,000th vehicle, a C430 8x4 with a cement mixer, will join Pigeon's fleet of 500 trucks. "Groupe Pigeon owns a number of Renault Trucks vehicles. We know that we can count on their quality, reliability, and robustness, year after year," said Thierry Pigeon, President of the Groupe Pigeon. "We are very pleased with the fuel efficiency and technical innovations of the new Renault Trucks range, as well as their comfort and ease of use. These trucks provide our drivers with the best possible working environment." During the ceremony, Bruno Blin stated: "Bourg is an exceptional site. Since 1964, the plant has been making vehicles that meet the most stringent requirements from professionals such as Groupe Pigeon. And our ability to provide exactly what the market requires stems from our close relationships with our clients." During the ceremony, Bruno Blin thanked Kertrucks, Renault Trucks dealer in Brittany, which collaborates with Groupe Pigeon. The Renault Trucks manufacturing site in Bourg-en-Bresse was built in 1964. The site’s 1,400 employees produce 120 trucks each day for the company's long haul, construction, and heavy construction ranges (T, C and K). Renault Trucks also has three other manufacturing sites in France: Lyon, Limoges, and Blainville-sur-Orne. .

Volvo Trucks Press Release / April 6, 2017 Family-owned Finnish haulers Kuljetus S. Simpanen Oy must transport loads of up to 80 tonnes through thick snow and ice, and over steep, narrow roads. It is a tough assignment and it requires the toughest of trucks - in this case a Volvo Truck FH16 750 with I-Shift with Crawler Gears. “I have an almost perfect timber truck. If God made a better one, he kept it for himself,” says owner Saku Simpanen. For English subtitles, click on the "CC" icon in the lower right corner after beginning the video.

IVECO Trucks Press Release / April 7, 2017 The IVECO plant in Madrid is the first of CNH Industrial's 64 facilities located around the world to achieve the highest level in manufacturing excellence. Achieving the Gold WCM Level has required a profound transformation of production systems as well as significant environmental and safety improvements, in which the involvement of everyone at the plant has been essential. The Madrid plant manufactures the heavy line of IVECO vehicles, which consists of the New Stralis NP and XP, and Trakker ranges for the global markets. The IVECO plant in Madrid, Spain, is the first manufacturing facility of the CNH Industrial Group to reach Gold Level in the World Class Manufacturing (WCM) program - one of the global manufacturing industry's highest standards for the integrated management of manufacturing plants and processes. With this achievement, the plant is now the highest ranking facility in terms of manufacturing excellence amongst the Group's 64 facilities worldwide. Pierre Lahutte, IVECO Brand President, commented: "We are very proud of the Madrid plant and its WCM Gold Level. This is a huge achievement, which has been made possible by the teamwork, commitment and determination of everyone here at the plant. We have made important investments in the facility, and through the sustained efforts of all the people involved in the production we have completely overhauled the manufacturing processes. The result is best-in-class quality for every single vehicle that leaves the assembly plant." Tom Verbaeten, CNH Industrial Chief Manufacturing Officer, added: "We started work on re-engineering all the processes at our plant 10 years ago, and it has been a relentless effort in continuous improvement. Today the plant is at the very top in terms of manufacturing quality. We have reached the very best-in-class level, but this is not the point of arrival: it is the beginning of our next era of excellence, and we will be working just as hard in this continuous improvement process to bring our customers the very best quality in their IVECO trucks." The Madrid plant has achieved the best results in its history in this WCM audit as a result of the improvements it has introduced over the years, which have translated into a continuous increase in safety, high quality in the processes and products, and a level of service of 100%. In addition, the plant's exceptional environmental improvements have resulted in a 53% reduction in CO2 emissions per manufactured vehicle and in the facility recycling 99% of its waste. The majority of these improvements have been possible thanks to the involvement of the plant's employees through a suggestions program, in which the Madrid plant is a global reference within the Group with 28 suggestions made by each employee every year. The Madrid plant: from Spain to the rest of the world The Madrid IVECO plant hosts the production lines and Research & Development centre for the brand's heavy range: the New Stralis, both in the Diesel version, the Stralis XP, and in the CNG and LNG versions, the Stralis NP, as well as the Trakker. The flexible and complex production process of the site enables it to produce up to 300,000 different versions of these vehicles. 87% of this production is destined for export, mainly to European markets, but also to Africa, Asia and South America. The plant employs over 2,500 people, with the highest percentage of female employees in the Spanish automotive sector: 21%. Last year the site received the Kaizen Institute's Excellence Award in the System of Continuous Improvement category. Madrid: a factory full of history IVECO acquired the Madrid facility in 1990, when it took over the historic Spanish truck brand Pegaso. In 2016, the facility celebrated the 70th anniversary of Pegaso and paid homage to a name that was the driving force of industrialization in Spain for many years with the presentation of a Limited Edition Stralis. Pegaso was born in 1946 as Empresa Nacional de Autocamiones (ENASA). The project for the large manufacturing plant in Madrid was started immediately and the first phase of construction was completed in 1955. Pegaso's total production in Madrid, from 1946 to 1990, reached 405,000 units. In 2008, under the name IVECO Pegaso, the manufacturing site reached the milestone of one million sold vehicles. IVECO and its commitment to Spain The second IVECO plant in Spain, located in Valladolid, is also among the very best of the 64 plants of CNH Industrial in the world, only one point away from the Gold level. In 2012, IVECO decided to concentrate all manufacturing activities of its heavy range in Spain, which meant doubling production in the country. Since then, it has invested 500 million euros in the Spanish plants and aims to continue to increase the production capacity and specialization of the two plants in Madrid and Valladolid. .

MAN Truck & Bus Press Release / April 7, 2017 On March 14, 2017 the MAN Trucks heavy truck assembly plant in Niepołomice near Cracow, Poland, marked an extraordinary milestone. It produced its 90,000th truck since opening. The milestone vehicle was a MAN TGS 18.420 4x2 BLS - TS semitrailer truck, which was received by Marek Sachs, managing director of Polish transport company Sachs Trans. Sachs Trans already operates a fleet of some 50 vehicles with the famous lion on the front. They are mostly 460 and 500 horsepower MAN TGX EfficientLine 3 semitrailer trucks, though the company also runs MAN TGX 26.500 6x2/4 BLS tractor units for heavy-duty domestic and international transport services. The semitrailer truck handed over on March 14 is one of 80 vehicles Sachs Trans has ordered this year, and is the 90,000th truck the MAN plant has produced since it began operating in October 2007. At the facility near Cracow MAN produces trucks of the TGX and TGS model series, which are shipped all around Europe. It also produces heavy truck models for global markets. .

MAN Truck & Bus Press Release / April 6, 2017 .

First MAN TGE rolls off the line MAN Truck & Bus Press Release / April 6, 2017 A month after the sales launch, the first production MAN TGE is rolling off the line at the newly constructed plant in Wrzesnia, Poland. The teams headed by Jens Ocksen (CEO of Volkswagen Poznan) and Dennis Affeld (Senior Vice President Sales Van at MAN Truck & Bus) jointly take delivery of the first MAN TGE, a silver van with the VIN number … 01. The launch of the TGE marks the start of a new era for MAN. It is the first time MAN Truck & Bus has marketed a light commercial vehicle, and represents a response to the demand from many long-standing customers in the logistics, courier and parcel service, after-sales and trades sectors. The main reasons for the increasing use of large vans are the expansion of online shopping, harmonised driving licence regulations, the wide-ranging versatility of the vehicles and their car-like handling and performance. Increasing urbanisation, especially, is driving demand for a broad range from 3 tonnes gross vehicle weight rating upwards. Good reasons, indeed, to source such a model within the Group, utilising available synergies. "Our recently established plant in Wrzesnia is setting new quality standards. The vehicles undergo a wide range of quality checks. The dimensional stability of the body shell itself is repeatedly checked during the assembly process by automated lasers and digital cameras on multiple geometric stations. I am therefore delighted to be supplying the MAN brand with a model of such high value added as this first TGE", comments Jens Ocksen. Dennis Affeld enthusiastically agrees: "We are looking forward to combining the high-quality production standards of the TGE with MAN's professional sales and service network. We have no doubt our customers will love it. We plan to sell about 20,000 vehicles a year." The vehicle with VIN number 1 is a silver van with a short wheelbase and high roof. The high-roof MAN TGE is around six metres long with a load capacity of 10.7 cubic metres. The van – in weight rating variants up to 3.5 tonnes – is powered by a highly efficient 1968 cm3 capacity diesel engine developing 103 kW/140 hp. There is already one site where the vehicle will be in use: the MAN plant in Munich. .