kscarbel2

Iepieleaks / March 28, 2017 Scania seems to be working on a new generation of V8 engines. Well informed sources from Scandinavia inform Iepieleaks that there will be a new V8 engine with SCR only. That means that Scania is getting rid of the EGR sytem for almost the complete engine line! The new engine will have two turbo-chargers and one of them is a VGT turbo. The maximum output is said to be 760 horsepower, an increase of 30 horsepower compared with the existing model. The other engine ratings will be 520, 580 and 650. The 650 horsepower rating should be the most powerful engine that can be ordered with a manual transmission, but only in the R- cab. .

Commercial Motor TV - sponsored by DAF Trucks / March 27, 2017 .

Scania Group Press Release / March 28, 2017 In 2016, Scania saw a significant uptake in business relating to sustainable transport. The increase reflects a growing demand for both products and services. The number of vehicles that Scania sold that run on alternative fuels and hybrids increased by 40 percent in 2016, a proof point of the company’s efforts to lead the shift towards a sustainable transport system. In total, close to 5,000 such vehicles were sold in 2016. “The demand for vehicles that support the shift to sustainable transport is growing and so is the demand for services that support fleet owners in reducing fuel consumption, and consequently also both carbon emissions and cost. This proves that sustainability and profitability go hand-in-hand,” says Henrik Henriksson, President and CEO of Scania. Almost 40,000 of Scania’s customers’ drivers were trained in fuel-efficient driving in 2016. This is a year-on-year increase of 30 percent. Ecolution by Scania is another area that has shown significant growth. A consultancy service that on average saves 12 percent in fuel and CO2 emissions for customers, the number of Ecolution by Scania contracts signed in 2016 increased by 37 percent from 2015, to more than 2,700. For more than 25 years, Scania has produced commercial biofuel solutions, and today the company provides the largest variety of engines for alternative fuels on the market.

Renault Trucks Press Release / March 28, 2017 Renault Trucks offers its customers vehicles enabling them to make their business grow. This film demonstrates that the new Renault Trucks vehicles are profit centers and reveals the Unique Selling Points related to the new range D (Distribution range) compared to the previous Renault Trucks range and compared to the competitors' range. .

Ford plans to invest an additional $350 million in Michigan plants Automotive News / March 28, 2017 Ford Motor Co. will add $350 million in new investments at two Michigan assembly plants on top of previously pledged spending. The automaker said Tuesday it will invest $200 million in its Flat Rock Assembly Plant for an advanced data center. It will also spend $150 million at its Michigan Assembly Plant in addition to what was pledged two years ago as part of the automaker’s contract with the UAW. The latest planned outlay at Flat Rock follows a $700 million spending plan announced by CEO Mark Fields in January. Both of this year’s announcements at Flat Rock -- which builds the Ford Mustang and Lincoln Continental -- are separate from a $400 million pledge for the factory that was part of the 2015 UAW deal. That UAW accord also included a Ford promise to invest $700 million in Michigan Assembly to re-tool the plant to build the Ranger and Bronco later this decade. On Tuesday, Ford said that changeover would require more spending. “Back in 2015, we hadn’t done a full-blown plan on how to convert the plant,” Joe Hinrichs, Ford’s president of the Americas, said in an interview. “Now that we’re in the implementation phase, it’s been a little more than we originally thought.” He called the initial $700 million for Michigan Assembly estimate “a little conservative” and said the added cost was not a surprise. The automaker also reaffirmed a $150 million investment in its Romeo Engine plant. That spending was also pledged in 2015 when Ford signed a four-year pact with the union. Ford’s investment will result in 130 created or retained jobs at Romeo Engine. Hinrichs said the number of new jobs will be “incremental.” In total, Tuesday's announcement brings spending across the three plants to $1.2 billion. Ford shares closed Tuesday up 1.7 percent to $11.65 a share. Hinrichs said Ford’s government affairs team informed the White House of its plans early today. In response, President Donald Trump tweeted at 6:36 a.m.: “Big announcement by Ford today. Major investment to be made in three Michigan plants. Car companies coming back to U.S. JOBS! JOBS! JOBS!” Hinrichs said today’s news wasn’t related to the “very, very big, very important” auto industry announcement Trump teased on his March 15 visit to the American Center for Mobility in suburban Detroit. “We had not had any discussions with the administration or given them a heads-up,” Hinrichs said. “We don’t believe this is what he was talking about.” State support In a related action, the Michigan Strategic Fund on Tuesday approved a $10 million performance-based grant and a state essential services assessment exemption worth $10.4 million over 15 years for the Flat Rock investment. The MSF said the Flat Rock investment will result in 650 qualified new jobs with the potential for 700 new jobs. The MSF also approved money for the Michigan Assembly and Romeo Engine projects, including a $2 million performance based grant; an alternative state essential services assessment exemption of $1.3 million over 15 years in Romeo; and an assessment exemption of $7.25 million over 15 years for Michigan Assembly. On Twitter, the Michigan Economic Development Corp.said all three Ford projects would generate more than $2 billion in total capital investment, create 800 new jobs and retain 3,600 jobs. ‘Good day’ Ford will begin re-tooling its Michigan Assembly Plant in Wayne in May 2018. The small car plant currently makes the Focus and C-Max. Hinrichs declined to say when production of those two products would stop to make way for the Ranger and Bronco. Ford said the changeover will take four weeks. “It’s similar to Dearborn,” Hinrichs said, referencing Ford’s 2014 transformation of its Dearborn Truck Plant to install the equipment to build the redesigned aluminum-bodied F-150 pickup. The Romeo Engine investment will allow the plant to build components for several vehicles, including the Ranger and Bronco, Ford said. The facility currently builds engines for the Super Duty, E-Series, Ford Shelby GT350 Mustang and Shelby GT350R Mustang. It makes engine components for F-Series, Mustang, Explorer and Edge. “UAW-Ford is proud of the total investments in three of our Southeast Michigan assembly and engine plants, which will lead to stronger job security for our members and continued support for the surrounding communities,” UAW-Ford Vice President Jimmy Settles said in a statement. Ford says it has invested $12 billion in its U.S. plants and created nearly 28,000 U.S. jobs over the past five years. “Any time we have major investment news for Michigan and the U.S., it’s a big deal for the economy,” Hinrichs said. “It’s a good day for Romeo, Wayne and Flat Rock. We’re excited to continue investing in the U.S.” Negative reaction Trump in his Tuesday morning tweet did not take credit for Ford’s news, but nevertheless drew scorn from Democrats and others. Steven Rattner, who served as head of former President Barack Obama’s automotive task force during the industry’s meltdown in 2008-09, said the president’s tweet was misleading. “The big news ended up being only 130 jobs in MI that were announced back in 2015,” Rattner tweeted. The Michigan Democratic Party also criticized Trump’s tweet. "Donald Trump taking credit for Ford's latest investment in Michigan is like a kid telling his friends he made dinner when his dad picked up a Hot-N-Ready from Little Caesars," Brandon Dillon, chairman of the Michigan Democratic Party, said in a statement. "These investments are the result of collective bargaining between UAW and Ford in 2015, made possible by President Barack Obama's faith in America's auto workers." U.S. Rep. Debbie Dingell, D-Mich., whose 12th district includes Ford's headquarters in Dearborn, said in a statement that Ford’s announcement was a cause to celebrate U.S. manufacturing. “Today’s announcement is further proof of Ford’s commitment to producing in Michigan and the United States," she wrote. "Ford’s roots run deep in Michigan’s 12th District, and these investments bolster the company’s dedication to building its highest-tech vehicles here in the U.S. and strengthen its commitment to American workers, who are the best in the world." Ford Press Release - https://media.ford.com/content/fordmedia/fna/us/en/news/2017/03/28/ford-investing-one-point-two-billion-in-three-michigan-facilities.html

(I posted here because the film relates to the "League of Nations", predecessor to the United Nations.) This is a great video. I'm sure many have never seen a film of Hoover or heard him speak. He was one of the great presidents. As Archie and Edith Bunker once sang, "we could use a man like Herbert Hoover again." Boy the way Glenn Miller played Songs that made the Hit Parade Guys like us we had it made Those were the days. And you knew who you were then Girls were girl and men were men Mister, we could use a man like Herbert Hoover again Didn't need no welfare state Everybody pulled his weight Gee our old Lasalle ran great Those were the days!

International Trucks officially returns to Australia Prime Mover Magazine / March 23, 2017 The International brand has officially returned to Australia with the launch of the new ProStar range in Melbourne last night. The much-anticipated unveiling ceremony at the Iveco Australia plant in Dandenong officially put an end to a two-year waiting period that began with an announcement by International parent company, Navistar, to bring the brand back to Australia at the 2015 Brisbane Truck Show. International-branded trucks had been manufactured and or assembled at Iveco’s heritage-listed facility from 1952 through to 2001. Iveco Australia once again secured the distribution rights for the brand in late 2016 and has since been working on adapting the ProStar range to the local Australian operating environment. According to Michael Jonson, Managing Director of Iveco Australia, the return thus marks a “homecoming” to the location where thousands of International commercial vehicles originated. “Welcome home, International,” he said in Melbourne. “The brand’s DNA still runs deep today with the current Iveco ACCO range sharing its lineage with earlier ACCOs developed under the International brand.” The ProStar, the first model to be sold under the revived International label, will be available in day cab, extended cab with a fully ADR-compliant bunk, and integrated full-size sleeper cab variants, and in a choice of five wheelbases. A key selling point of the new range, according to International Engineering Manager, Adrian Wright, is the short ‘bumper to back of cab’ (BBC) configuration, making the ProStar models suitable for a variety of combinations. “The day cab will fit in front of virtually any Australian trailer set,” he said. “The ProStar is also well suited for truck and dog work, for use as a 34-pallet B-double, 36-pallet B-double and even B-triple and two trailer road train work.” According to Jonson, initial dealer feedback on the revived brand has been exceptional: Iveco reportedly planned to start off with a batch of around 100 units, but dealer interest was so strong that more trucks will be ordered from Navistar. Versatile design One aspect that convinced Iveco dealers was the new range’s sturdy design: To ensure longevity and durability in demanding Australian conditions, Wright said the 2.1m-wide cab is constructed from high strength steel panels, zinc coated on both sides then fully dipped in e-coat primer, while the new models also benefit from a high tensile steel chassis with 9.5mm thick side members and huck-bolted cross members. All vehicles will be powered by the latest E5 Cummins X15 SCR engine, producing 550hp (410 kW) and 1850 lb. ft. (2,508 Nm) of torque. “The engine, an evolution of the X15e5, is well proven in the local market and has been extensively tested here by International in conjunction with Cummins,” Wright said. Coupled to the engine is a choice of either an Eaton 18-speed manual, which features an effort-reducing ‘air over hydraulic’ clutch, or an Eaton ‘UltraShift Plus’ 18-speed automated manual (AMT). Power to the rear Meritor tandem axles is provided via a Dana SPL driveshaft, and traction is aided by power divider lock and cross locks on both rear drive axles. Up front, the models use Meritor MFS axles with aluminium alloy hubs for reduced tare weight, while the suspension is three-leaf parabolic taper-leaf unit with 6,500 kg capacity. Rear suspension comes courtesy of a Hendrickson in the guise of the Primaax-EX Air Tandem, se -up for a 20,900kg capacity. On the safety front, the ProStar features ABS brakes with Automatic Traction Control; and trucks specified with the UltraShift Plus transmission are also equipped with Hill Start Aid. Inside the cabin, Wright said International engineers have concentrated on delivering a working environment, “that delivers high functionality and ergonomic design”. Ambitious outlook “The ProStar offers a tried and proven formula that has been missing here for several years,” Wrigth explained, adding more models and variations will follow once the initial rollout is finalised. “It’s an innovative and efficient truck in many ways, but also has very solid and proven fundamentals that will appeal to local operators. “The trucks have a proven drivetrain package and strong underpinnings to handle Australia’s tough geographic and climatic conditions. The commonality and widespread availability of the drivetrain componentry allows for easy serviceability and maintenance leading to reduced operating costs. “When combined with the latest engine technology from Cummins and class-leading aerodynamics, you get the best of both worlds.” Yesterday’s launch event was attended by a number of senior executives from Navistar in the US to underline the importance of the project for both Navistar and Iveco Australia. “The return of International to Australia has been eagerly awaited, especially given the high standing the brand enjoys here courtesy of earlier models and a very long and successful pedigree,” said Federico Palomo, Vice President for Global Export – adding the brand was finally back where it belonged. “These historical aspects aside, we also know that prospective customers in Australia are also extremely excited by the outstanding features and benefits that the new ProStar models will deliver to their operations. “There was an obvious gap in the local market for a high quality and versatile, yet affordable North American-style truck that could get the tough jobs done with a minimum of fuss. Navistar is extremely pleased to have worked closely with Iveco Australia to bring the International ProStar to market down under.”

Trade Trucks AU / March 24, 2017 Storied brand unveils slick bonneted Prostar day cab and tipper, extended cab, and sleeper International’s tilt at returning to Australian prominence will centre on four Prostar versions marketed through Iveco and related dealerships. Flagged by Navistar at the last Brisbane Truck Show, the project, which is just short of two years in the making, made its official debut this week with unveilings to dealers and the industry media. "Having the International product added to our very extensive product range already, having the conventional 15-litre, is a real cap across out entire product range," Iveco Australia and New Zealand MD Michael Jonson says. While the final dealership network set-up is still being finalised, Australia and New Zealand executive GM Ray Osgood of parent firm CNH Industrial (CNHI) reveals Iveco’s sister-dealerships for CNHI's agriculture-focused Case IH will have a role. He also noted name-checked the 15-litre Cummins engine, saying it was "something we haven’t had in our range" and – with 100 trucks said to have been spread through about 70 dealerships – suggested that perhaps there were not enough. Iveco says an initial list of outlets is expected to be announced in the coming weeks. "Our preference is to begin operating through a core group of dealerships that meet our stringent requirements and then strategically increase the network footprint through the appointment of additional dealerships – these could be standalone International dealerships and or parts and service outlets." Iveco Australia dealer development manager Matteo Gambaro says "From a parts and service perspective, we’re also fortunate that Iveco full line dealerships and service and parts outlets already have a thorough knowledge and understanding of much of the ProStar’s componentry thanks to a number of existing Iveco models featuring Cummins, Hendrickson, Eaton and Meritor equipment, as well as their ongoing support of the previous generations of International products. "Further to this, I can confirm that all International dealers will also be authorised Cummins dealers. "We’re confident that our initial Dealer appointments will be well positioned to suit the majority of ProStar buyers in metropolitan and rural areas, with this support to only get better as the year progresses." International engineering manager in Australia Adrian Wright noted that the launch presentation footage eschewed North American images for that of other countries where higher weights, harsh conditions and multi-combinations were comparable the Australian experience. The design of the right-hand-drive cab and aerodynamic front end and other innovations for Australian conditions were a joint effort US-Australian effort. But Wright described the present iterations as ‘Phase 1’. "The combination of the latest engine technology from Cummins and superior aerodynamic performance saw the prototype return some impressive fuel consumption figures in local, real world testing," Wright says. "Aerodynamics makes a big difference to truck fuel efficiency – about half of the fuel that the truck uses goes towards pushing it through the air, so if you achieve a 10 per cent improvement in aerodynamics this translates to about a 5 per cent improvement in terms of fuel economy. "Compared to some more traditionally styled, flat fronted vehicles, the ProStar is as much as 10 per cent more aerodynamic. Even running some basic numbers the fuel savings – and therefore cost savings – that can be made over the life of the truck are enormous." Wright emphasises the visibility advantages helped by the nose design and wraparound windscreen. "The line of forward vision for the driver onto the road ahead is unobstructed thanks to the sloping hood, lower placed instrument panel and wrap around windscreen," Wright says. "The ProStar again boasts best-in-class performance in this area comparing very favourably to other conventional cabs and even cab over trucks." Crucial details All vehicles will be powered by the latest E5 Cummins X15 SCR engine producing 550hp (410kW) and 1850 lb ft (2,508 Nm) of torque. It features high pressure injection and the Cummins Emissions Solutions (CES) system to comfortably meet Euro5 emissions requirements. Cooling is through an ‘Over and Under’ system with CAC above radiator and Horton Drivemaster air operated two-speed fan drive, ensuring optimum performance in hot Australian conditions. Coupled to the engine is a choice of either an Eaton 18-speed manual with the Eaton UltraShift Plus 18-speed automated manual is optional. Power to the rear Meritor tandem axles is via a Dana Spicer SPL driveshaft and traction is aided by power divider lock and cross locks on both rear drive axles. Up front, the models use Meritor MFS axles with aluminium alloy hubs for reduced tare weight while suspension is three-leaf parabolic taperleaf with 6,500kg capacity. Rear suspension comes courtesy of a Hendrickson Primaax-EX Air Tandem set-up with 20,900kg capacity. The day cab comes with a 4.3 metre wheel base "which allows you to meet that critical dimension of 5.4 metres from the bumper to the centre of the fifth wheel". Bumper to back of cab lengths are 112 inches, 138 inches and 141 inches. The sleeper cab inner-spring mattress is 2170x700mm. The tipper wheel base is 5 metres and both are said to be suitable for performance based standards. Gross vehicle mass and gross combination mass are 24.5 tonnes and 90 tonnes respectively. Safety stakes The ProStar features Benix ABS brakes with automatic traction control. Trucks specified with the UltraShift Plus transmission are also equipped with Hill Start Aid. They can also benefit from the optional ‘ADEPT’ package, a suite of innovative electronic features capable of further reducing fuel consumption by up to 6 per cent. The system utilises load, speed and grade sensing software, making minor adjustments to speed, power and transmission gear selection to take advantage of vehicle momentum for better fuel economy. The ADEPT package also includes‘SmartTorque2 and SmartCoast technology. SmartTorque2 is the next generation of torque management technology from Cummins. The system senses both the selected gear and overall engine load as a result of the gross vehicle weight, aerodynamic drag and road grade. All models come standard with a park brake warning alarm that sounds if the key is off and the driver’s door is opened without the park brake being applied. The trucks have dual, polished aluminium fuel tanks with 720 litres total volume – alternative fuel tanks options are available to meet specific applications. The AdBlue tank is 90 litres. The models feature front under-run protection and LED headlamps with integrated daytime running lamps for added visibility during day or night. Foreign contingent In attendance from Navistar were vice president – global export Federico Palomo, director of sales Dicky Commandeur, chief engineer Marco Anaya and director of marketing and strategy Octavio Gonzalez. "The return of International to Australia has been eagerly awaited especially given the high standing the brand enjoys here courtesy of earlier models and a very long and successful pedigree," Palomo says. "These historical aspects aside, we also know that prospective customers in Australia are also extremely excited by the outstanding features and benefits that the new ProStar models will deliver to their operations. "There was an obvious gap in the local market for a high quality and versatile, yet affordable North American-style truck that could get the tough jobs done with a minimum of fuss." Specifications Engine: E5 Cummins X15 SCR engine Output: 550hp (410kW) and 1850 lb ft (2,508 Nm) of torque Transmission: Eaton 18-speed manual with the Eaton UltraShift Plus 18-speed automated manual is optional Driveshaft: Dana Spicer SPL250XL main and SPL170XL inner axle shaft Front axle: Meritor MFS 14-142A wide track Front suspension: Parabolic Taperleaf Rear axles: Meritor RT46-160GP Rear suspension: Hendrickson Primaax-EX Air Tandem .

Mack and Volvo announce the end of the 16-litre in the North American market. Power Torque Magazine / March 25, 2017 It’s the end of the line for the Volvo D16 and Mack MP10 engine in the American market with both manufacturers announcing the withdrawal of the engine from the product line up, with each company citing “diminishing demand” as the reason for the cancellation. Introduced into the U.S. in 2005, the D16 offered displacement of 550 to 625 hp – mainly at heavy haul applications. Similarly, Mack Trucks, will no longer be offering its large displacement MP10 engine, which is based on the D16. Mack is also discontinuing sales of its Titan heavy haul prime mover as well. “The decision to withdraw the D16 and MP10 16 litre is the result of limited market demand for this engine displacement and the long-term investment that would be required to maintain the D16 for the unique operating requirements of the North American market,” a spokesperson for Volvo Trucks said. The D16 engine was available in Volvo’s VNL and VNX models. The VNL will continue to be available with the Volvo D11, D13 and Cummins X15 engines, while production of the VNX – introduced in 2013 – will be placed “on hold” though it will remain in Volvo’s product lineup for now. The company is currently evaluating solutions that will allow it to offer it in the future. In the interim, it intends to offer an ‘X-package’ for the VNL model, providing the ride height and heavy-haul attributes of the VNX with either the Volvo D13 or Cummins X15 engine,” the spokesperson added. Sources within the industry suggest that the engineering development costs necessary to calibrate both the D16 and MP10 engines for full Euro 6 emissions compliance will be too expensive to justify keeping either engine in the European product range, resulting in their withdrawal from global sales for sophisticated markets by the close of 2017 or early 2018. This would leave both Volvo and Mack dependent on their 13-litre engine range for most configurations, augmented by the availability of the Cummins X15 engine option.

ZF’s efficient automatic commercial vehicle transmission is chosen by truck manufacturers in China and Turkey TraXon Torque shows off its broad capabilities for the first time in a mobile crane The basic TraXon system is currently being tested on a ZF bus, while the future-oriented TraXon hybrid application is already installed in ZF's Innovation Truck Best-in-class efficiency combined with greater function and innovation, the modular design can be customized for almost any heavy commercial vehicle – making it attractive on a global level. Truck manufacturers who have purchased the unique ZF-TraXon automatic transmission include MAN, Iveco and, most recently, Ford Trucks and Foton in China. Additionally, the product celebrates its launch in a Liebherr mobile crane. Meanwhile, the ZF Innovation Truck is demonstrating the TraXon hybrid's practical advantages and a ZF test bus fitted with the basic transmission is racking up test miles. “We are very proud to have won the new TraXon orders and first-time applications,” says Fredrik Staedtler, head of the ZF Commercial Vehicle Technology Division. “Ultimately, they show that our modular system meets all of our developmental requirements – internationally and across numerous vehicle types.” By combining five different start-up or shifting modules in the basic transmission model, current and future manufacturers' demands regarding automatic transmissions for heavy commercial vehicles are covered. Up and coming TraXon will be launched this year in the Chinese market on Foton trucks. ZF will supply the model with the optional Intarder integrated transmission brake. The basic transmission model, which comes with 12 or 16 gears, offers extremely high efficiency – primarily through its ability to handle up to 3,400 Nm of torque (overdrive version), its high transmission-ratio spread of up to 99.7 percent and the outstanding, best-in-class power-to-weight ratio. Included are ZF's innovative electronics on a uniform software platform, combining the predictive shifting strategy, PreVision GPS, as well as a rolling and rock-the-vehicle-free function. TraXon is also the first choice of Ford Trucks. It is a standard component in the new and recently launched Ford Trucks series, with a Euro-6 driveline. The new orders from China and Turkey will see the first volume production of ZF's innovative TraXon outside the European Union (EU). European customers are also relying on TraXon. The transmission's volume production launch has been successful at MAN, and Iveco will follow suit. “With TraXon, we are continuing the outstanding cooperation we have enjoyed with Iveco in the past decades. The innovative modular transmission system is seamlessly replacing the ZF-AS Tronic used up until now,” adds Staedtler. ZF's innovative TraXon will also be used outside the truck segment Flying high Heavy-duty trucks with a gross vehicle weight rating exceeding 200 tons will benefit from comfort features such as high shift and start. The launch of the TraXon Torque model installed for the first time into the Liebherr LTM 1300-6.2 mobile crane is a prime example of these features. The crane has a total weight of 72 tons and is equipped with a 455 kW engine handling a maximum load of 300 tons. Rather than having a standard dry single or twin plate clutch, the basic TraXon transmission is combined with the torque converter clutch module. At extremely high input torque and in lower gears, it ensures non-wear starting as well as gentle and comfortable maneuvering, all at low life-cycle costs. The engine-dependent PTO is an additional option for mobile cranes. Regardless of the driving speed, this device provides very high torque to the auxiliary systems. ZF also offers a total of four reverse speeds as an additional option within TraXon, which benefits other specialized truck applications – such as those vehicles used in highway construction work that require speed in reverse. As with the previous TC Tronic HD model, the TraXon Torque is also available on vehicles that weigh considerably more, such as the Liebherr LTM 1750-9.1 with a gross vehicle weight rating of 108 tons and 750 tons load. Most of the Liebherr mobile crane product family will be switched over to the new transmission. Diverse modules The TraXon hybrid configuration has been installed in ZF's current Innovation Truck and demonstrates the benefits of driveline electrification for long-distance trucks. It comes with a 120 kW and 1,000 Nm electric motor as well as a separating clutch in the bell housing of the transmission. This enables all hybrid functionalities, including recuperation, electric maneuvering, start/stop functionality and performance support from the combustion engine, or boosting. Additionally, in generator mode, the hybrid module can be integrated into the power supply of other units, such as refrigerated transport. In any scenario, the TraXon Hybrid contributes toward reducing fuel consumption and truck emissions. “It is true that the approximately five percent savings for long-distance trucks is below those values typically seen in electric delivery trucks or even passenger cars. Nevertheless, due to the considerably higher mileage and fuel consumption of long-distance driving, hybrid technology is an economic and environmentally friendly solution that pays for itself fairly quickly,” explains Staedtler. Another market segment suitable for the TraXon transmission is that of passenger transport and ZF is currently evaluating an application of the basic transmission on a test bus. Modern passenger transport vehicles require transmissions capable of returning fuel savings with heavy loads while providing reliability and driver and passenger comfort. TraXon meets all of these requirements thanks to the variable, smooth and quiet gear transitions. At six decibels lower than its predecessor, the AS Tronic, TraXon returns a 35 percent improvement.

Owner/Driver / March 3, 2017 Look no further for a comprehensive list of truck shows in Australia for 2017! It’s a new year and that means there is a huge line-up of truck shows in the 12 months to come. So what will we see this year? From big metropolitan truck shows to charity convoys, there will be an event for all truck lovers in 2017! The biggest event on the trucking calendar, the Brisbane Truck Show is hitting Brissy this year, but there are also loads of local and regional events for you to check out. Check out the more information link to see the official page for each event, and click the ‘map’ link to get directions to any of the events through Google Maps. Don’t forget to check back on this page at a later date as some event details won’t become known until the date approaches. March Show Name: Australian White Truck Muster Date: 18th & 19th March Place: Kyabram, VIC More information: Official Website Directions: Map Show Name: Oaklands Truck Show Date: 18th & 19th March Place: Oaklands, NSW More information: Official Website Directions: Map Show Name: Penrith Working Truck Show Date: 19th March Place: Museum of Fire, Penrith, NSW More information: Official Website Directions: Map Show Name: Harden Truck & Tractor Show Date: 19th March Place: Harden Murrumburah Showgrounds, NSW More information: Official Website Directions: Map Show Name: LBRCA Conference Date: 31st March & 1st April Place: Dubbo, NSW More information: Official Website Directions: Map April Show Name: Canberra Convoy for Cancer Families Date: 2nd April Place: Exhibition Park in Canberra (EPIC), ACT More information: Official Website Directions: Map Show Name: Haulin' the Hume Date: 8th & 9th April Place: Clarendon Showgrounds to Yass, NSW More information: Official Website Directions: Map Show Name: Hotel Tudor Family Truck Show Date: 16th April Place: Woodberry, NSW More information: Phone the Hotel Tudor and ask for Kim Forrest on (02) 4966 3211. Directions: Map Show Name: Camp Quality Victoria Convoy Date: 30th April Place: Avalon Airport to Tabcorp Park, Melton, VIC More information: Official Website Directions: Map May Show Name: Burragorang Valley Coal Carters Reunion Date: 6th May Place: The Oaks, NSW More information: Official Website Directions: Map Show Name: Heritage Truck Association Australia's Annual Truck Show Date: 20th & 21st May Place: Rocklea, QLD More information: Official Website Directions: Map Show Name: Sydney Classic & Antique Truck Show 2017 Date: 28th May Place: Penrith, NSW More information: Official Website Directions: Map August Show Name: Casino Truck Show Date: 5th August Place: Casino, NSW More information: Official Website Directions: Map September Show Name: Clarendon Classic Rally Date: 16th & 17th September Place: Clarendon, NSW More Information: Official Website Directions: Map Show Name: North American Commercial Vehicle Trade Show Date: 25th-29th September Place: Atlanta, Georgia, USA More Information: Official Website Directions: Map Show Name: CAT/TNT Car Carrying Reunion Date: 30th September Place: Wagga Wagga, NSW More Information: Call Lila Wood on 02 6925 1868 or email lilawood@bigpond.com Directions: Map October Show Name: Australasian Road Safety Conference Date: 10th & 12th October Place: Perth, WA More Information: Official Website Directions: Map

Big Rigs / March 28, 2017 In 1982, a young Dick David purchased the BP Depot in Katherine NT and the name Dick David Fuel Supplies was on the move. Dick had previously been a driver and road boss in the Buntine Roadways Group and had learnt some valuable lessons in the running of a transport company during his time with Noel Buntine. With his knowledge and contacts in the northern pastoral industry, the business grew with fuel sales and delivery to the pastoral companies, road houses, mining ventures in the Top End. Later trading as Australian Fuel Distributors (AFD) the fuel depots in Tennant Creek, Alice Springs, Mount Isa, Darwin, Cloncurry and Kununurra were added to the fold. The business evolved to be a major fuel and lubrication supplier to northern Australia. Dick retired in 2003 selling the business to son Brooke, who took the business to another level with the purchase of retail sites rebranded as Gull Fuel and Ausfuel and the transport arm that has become Direct Haul. With cartage contracts to other major fuel suppliers and mining companies, Direct Haul increased its fleet. In 2003, Brooke David sold the business in 2003 to Puma Energy, a global energy corporation. The purchase fitted well with Puma's future expansion plans into Australasia. Direct Haul currently hauls around a billion litres of fuel each year with a fleet of eight prime movers pulling quad trailers, 16 prime movers on triple trailer work, one B-Double and 11 local trucks working out of depots in Darwin, Katherine, Alice Springs and Kununurra. Just to give an idea of the capability, a Quad in maximum configuration , tri-drive and tri-axle dollies has a GCM of 165 tonnes, up to 53.5 metres in length can carry 130,000 litres of diesel, a big responsibility for the drivers. Direct Haul's scheduling section has a number of old hands who can advise drivers of road conditions and possible hazards to get their load to the customer on time with a minimum of fuss. The fleet of trucks and trailers are washed in the in-house wash bay after every trip, rims polished regularly and cleaned inside making the fleet always look a credit to the company and the drivers. Direct Haul has evolved into a big player in the fuel cartage business in the Top End but still seems to be able to keep the personal touch to the end users, old traditions live on. .

Trade Trucks AU / March 24, 2017 New system allows drivers to have a ‘personalised workplace’ New Volvo FH, Volvo FM and Volvo FMX models will have latest in-cab upgrades aimed at improving navigation and driver-comfort features. Volvo Trucks says the upgrades will allow drivers to experience more efficient vehicle handling. The new track navigation system is easy to access and includes a touchscreen system. Volvo Trucks chief project manager Anders Edenholm says the new system for services and infotainment allows drivers to "personalise their workspace". "For example they can listen to their favourite local radio station no matter where they are, and they can have hands-free access to both their personal phone as well as work phone," he says. "Overall this helps create an enhanced and safer driving experience. "It increases the feeling of home when drivers are away for long periods of time." The design of the system focused on driver comfort, Edenholm says. "Because Dynafleet OnBoard and Navigation are integrated, drivers can receive messages with GPS coordinates and in just with a few seconds start navigating to their next assignment. "More time with hands on the steering wheel and eyes focused on the road means a safer and more productive driver." Other features include push-to-talk button for voice control on the steering wheel, as well as access to media streaming services such as Spotify, Deezer and TuneIn, as well as DAB [Digital Audio Broadcasting] and DAB+. .

Trade Trucks AU / March 23, 2017 Sydney-based Bedrock Quarry Products & Bulk Transport looked to a big 685hp Mack Super-Liner Tridem for a high productivity, 48-tonne payload, Performance-Based Standards (PBS) combination. The PBS-approved Super-Liner Tridem and 5-axle dog trailer were handed over at VCV Sydney West, with Mack Trucks Global Senior Vice President, Govi Kannan, and Mack Trucks Australia Vice President, Dean Bestwick in attendance. Mack Trucks Sales Manager at VCV Sydney West, Michael Inzitari, says Bedrock Quarry Products were looking at ways of increasing productivity and payload in supplying quarry materials to major civil contractors and concrete plants. "For years and years, sand and gravel was mined out of the Sydney basin for concrete and construction," Mr Inzitari said. "With those quarries now closed, the sand and gravel is pulled from further away − up the central coast and down the south coast, so making the trip in a normal truck and dog just doesn’t make sense when you’re only carrying a 32 to 33 tonne payload." Through the PBS scheme, VCV Sydney West were able to offer Bedrock Quarry Products the potential to achieve higher productivity and the best possible payload through an innovative and optimised design. "We’re constantly looking at ways of increasing our productivity," said Director of Bedrock Quarry Products & Bulk Transport, Mick Colley. "This Super-Liner Tridem that Mack developed can get about a 48 tonne payload - that’s about one and a half of the previous truckloads, and that’s a huge advantage for our business." "We have been using Mack trucks for years now, and have an entirely Mack fleet. Quarry work can be rough, and these trucks are built and get the job done day after day. "Now Mack are combining their toughness with the latest in innovation and technology, which means they’re the obvious choice for my business." Mack Trucks Australia Vice President, Dean Bestwick, says Mack Trucks is excited and proud to continue to partner closely with Bedrock Quarry Products & Bulk Transport. "Bedrock has made the decision, time and time again, to carefully select Mack to build their trucks," Mr Bestwick said. "Their fleet of 13 is comprised entirely of Mack trucks, including three 3-axle dogs, five PBS 4-axle Dogs, two PBS 5-axle dog trailers, one 25 metre B-Double, an 8-wheeler rigid and the newly acquired Super-Liner Tridem. "It’s really satisfying to produce customised trucks that are a perfect fit for the job with unmatched reliability, durability and application excellence; ultimately increasing productivity and profitability for our customers." As other customers also look to increase payload, Dean says the delivery of the PBS Mack Super-Liner Tridem showcases the brand's commitment to application excellence whilst leveraging the latest technology and innovative designs. "Bedrock Quarry Products & Bulk Transport pride themselves on prompt, efficient and reliable transportation of quarry products to each and every customer and Mack stands behind our trucks and our customers in everything they do," Mr Bestwick said. The Mack Super-Liner is fitted with the liftable pusher axle with HLM2 suspension, to allow reduced tyre wear and drag when empty running. The National Heavy Vehicle Regulator (NHVR) approved and PBS compliant combination will allow Bedrock Quarry Products to carry an estimated combined payload of 48 tonne, across an overall vehicle length of just over 24 metres. The Super-Liner features a custom Sloanebuilt Trailers aluminium tipping body and quin-dog trailer, ensuring the lightest tare weight while still achieving maximum strength and durability. .

Scania Group Press Release / March 28, 2017 Scania looks back on a year of record sales levels, strong operational performance and the landmark introduction of its new truck generation: the most energy-efficient truck Scania has ever built. In the year of its 125th anniversary, Scania celebrated its biggest product launch ever: the introduction of the new truck generation. Despite tough market conditions in 2016, Scania reached a record level in net sales and showed strong operational performance. “2016 was a remarkable year in Scania’s history and the start of a new chapter. From an already leading position we set a new benchmark for what is premium in the industry with new products and services supporting our journey towards a future of sustainable transport,” says Henrik Henriksson, President and CEO of Scania. The Annual and Sustainability report 2016 outlines how working sustainably is firmly rooted in Scania’s operations, and the core of Scania’s contribution to society – delivering sustainable transport solutions by improving customer profitability. Read the full Annual and Sustainability Report .

MAN Truck & Bus Press Release / March 28, 2017 MAN exhibited its industry expertise in long-haul transport, urban distribution transport, construction, heavy-duty transport, forestry & agriculture and municipal & fire brigade services MAN TGE for the first time at the Trucknology Days 91 exhibitors 7,000 visitors over three days The main focuses of the three-day MAN Trucknology Days event were the innovations introduced on MAN trucks at the start of the year. At its in-house exhibition, MAN made around 170 vehicles from many different sectors available to view and drive. MAN has been running the Trucknology Days as an in-house exhibition since 2008: an event where information meets fascination. Around 7,000 international visitors attended the event in Munich between 23 and 25 March 2017. There are traditionally two parts to the event: the MAN TruckForum and the test track. At the TruckForum, MAN Services and its partners display their range of services and individual transport solutions ranging from body manufacture to subcontracting. RIO, the new brand-name for networked logistics in the Volkswagen Truck & Bus Group, gave an insight into “connected performance” in the transportation industry in the future. RIO bundles digital services for the transportation and logistics ecosystem. For the first time ever, all parties involved in the supply chain - from the shipper to the recipient - through hauliers, carriers, loaders, materials requirement planners and drivers, can be networked via a unified information and application system which includes predictive functionality. With its Connected CoDriver, MAN is helping drivers and companies achieve a economical driving style. A trainer analyses the style and framework parameters of their driving and advises the driver. Outside the MAN TruckForum, part of the vehicle exhibition drew attention to the Trucknology Days. Heavy-duty semitrailer tractors and heavy loading cranes on MAN platforms gave a foretaste of the big industry display on the test track. The white painted trucks were part of the 'Trucks to go' fleet, a range of pre-built, ready-to-go commercial vehicles. The new MAN TGE makes MAN a full-range producer. With their permitted gross vehicle weights of between 3 and 5.5 tonnes, delivery vans with normal, high or super-high roofs, and chassis with single or double crew cabs have been added to the MAN model portfolio. At the TrucknologyDays, the MAN TGE was introduced to visitors as a delivery van. On the test track, visitors could find around 120 vehicles. Experts from MAN and from the body manufacturers explained the specific product features in talks, during a test circuit and beside the vehicles themselves. Visitors had the chance to drive around 30 of the vehicles on the test track. Examples from the truck product range was available, from the compact sweeper based on the MAN TGL to tippers and a fire service vehicle on the MAN TGM platform, the MAN TGS as a tilted articulated truck, a refuse collector vehicle or a timber transporter, and many MAN TGX vehicles for long-haul or heavy-duty purposes. The vehicle exhibition covered the following sectors: long-haul transport, urban distribution transport, construction, heavy duty transport, forestry & agriculture and municipal & fire brigade services. Long-haul transport sector For long-haul transport operators, the Total Costs of Ownership (TCO) are of vital importance. One element in this is the MAN TGX EfficientLine 3 semitrailer tractor that was introduced at the IAA 2016. On a tour going right across Europe and supported by TÜV SÜD, the engineers recorded potential fuel savings of 6.35% compared with the vehicle's predecessor. And the TGX EfficientLine 2 was already regarded as efficient when it came to fuel consumption. The more powerful engine associated with the introduction of the Euro 6c emissions standard and the increase in the maximum torque both contribute to the excellent driving performance. Connecting the pioneering cruise control system MAN EfficientCruise with MAN EfficientRoll significantly improves the potential savings. The EfficientRoll free-wheeling gearbox function will come into effect on gentle inclines or slightly undulating route sections. The new generation MAN TipMatic gearbox is another key component in the design of the driveline on the EfficientLine 3, which is consistently focused on saving fuel. At the Trucknology Days, MAN worked closely with semitrailer manufacturers to display various vehicle concepts for long trucks. When payload is a key factor, combinations of MAN tractor units and semitrailers or trailers score highly. They are designed with a permitted gross weight of 40 tonnes. One of these new concepts is the semitrailer which is 1.3 m longer, meaning it has three additional spaces for pallets. The total vehicle length is now 17.8 m instead of the 16.5 m that is standard for semitrailer units. Another version consists of a 3-axle vehicle for swap bodies with attached dolly, on which a standard semitrailer can be mounted. MAN's product range is so extensive that each of the vehicle configurations intended for long trucks can be produced with a 2-axle semitrailer tractor or a 3-axle chassis to support the carrier frame for swap bodies. Urban distribution transport sector Urban distribution transport means far more than a dry freight truck body on a MAN TGL platform, serving as a large delivery van. This was demonstrated by the wide range of vehicles exhibited at the Trucknology Days: refrigerated trucks, beverage bodies, dry freight truck bodies and milk collectors based on MAN TGL, TGM and TGS. Most of these come on a 2- or 3-axle chassis. Tractor trailer units are used either as tankers or silo trucks, or as heavy-duty food distribution vehicles with 1- or 2-axle Citysattel semitrailers. With tankers, the payload plays a key role in economic efficiency, because this is calculated according to the volume delivered. For this reason, MAN’s focus for the tanker-silo version of the TGS series has always been on creating an uncompromising lightweight vehicle that can simultaneously handle maximum payloads. Optimising the unladen weight makes the vehicle the lightest customer-oriented semitrailer tractor for tank and silo operations in the MAN product portfolio. If all the measures are implemented, the unladen weight of the TGS-TS is no more than around 6560 kilograms. Of special importance on drinks transporters are a low loading sill and manoeuvrability, so that the delivery points can be reached. On these vehicles in the TGM and TGS series, small tyre size and four corner air suspension are among the improvements made specifically for this purpose. The air suspension firstly protects the fragile and easily breakable load from bumps in the road surface and, secondly, allows the vehicle to be lowered by a few centimetres for loading and unloading. MAN supplies modified platforms as the base for milk collection vehicles. These require plenty of space on the right hand side for attaching the cabinet containing the pump and flow rate meter. This additional space on the frame has been achieved by moving the Euro 6 exhaust silencer and the diesel and AdBlue tank. Construction sector With over 30 vehicles, the construction sector occupied an important place at the MAN TrucknologyDays. There was a wide range of different models. Working closely with the body manufacturers, MAN was demonstrating its three-way tippers and tilting articulated trucks, crane tippers, building materials transporters, truck mixers, roll-off and set-down skip loaders and heavy-duty semitrailer tractor. One of the innovations at the TrucknologyDays was the combination of the MAN HydroDrive with the automatic transmission system TipMatic. This is the ideal configuration for when vehicles travel mainly on tarmac roads and only occasionally require additional traction. The benefit of the MAN HydroDrive hydrostatic front-axle drive really becomes evident when an off-road slope has to be negotiated without a load. A typical example of this is a tilted articulated truck which has deposited its load at the bottom of a pit. The rear axle, now under very little load, lacks traction on the incline. A benefit for the body manufacturers is that the PTO for the engine and gearbox can now be used without restriction. MAN HydroDrive is available for 2-, 3-, and 4-axle vehicles in the TGS series and for 2- and 3-axle semitrailer tractors in the TGX series. For cranes, MAN offers specially prepared chassis in the TGS series. All expectations regarding manoeuvrability, traction and efficiency are met by the drive formula 8x4H-6. This abbreviation stands for a 4-axle MAN TGS with the required axle load to support the crane. The frame has places for mounting the supports. The HydroDrive drive system on the second front axle provides the necessary traction on construction sites. The requirement for great manoeuvrability in order to be able to position the crane on the site is met by the fact that three of the four axles are articulated: the two front axles and the lifting trailing axle. The hypoid axles and economical engines in the D26 series help to boost efficiency while travelling between the yard and the construction site. Payload is important for truck mixers. The permissible weight for 4-axle vehicles in Germany is 32 tonnes. The lighter the chassis, the more concrete can be loaded into the drum. The MAN TGS 32.420 8x4 BB meets the sector requirements exactly: a weight-optimised frame made of high-strength steel, a lightweight but powerful 420 hp engine combined with the MAN TipMatic automated gearbox, a lightweight hypoid tandem axle assembly and a wheelbase of 2505 mm between the second and third axles ensuring compact vehicle dimensions and optimal manoeuvrability both in traffic and on the construction site. It also comes with a uniform set of tyres in 315/80 R 22.5 format on aluminium rims all round, tanks for 300 litres of diesel and 35 litres of AdBlue fluid, a spacious and clearly laid-out M cab for the driver and co-driver and a partially raised Euro 6 exhaust system behind the cab. This means that the chassis weighs just 9175 kg (excluding the driver and with the fuel tank 10% full). Heavy-duty transport sector MAN's heavy-duty transport solutions are always a source of fascination at the vehicle exhibition and on the test track. Whether it is a question of transporting heavy weights or bulky objects in urban areas, the MAN product range is perfectly equipped to meet these very specific requirements. Regional circumstances and different legal requirements affect the configuration of vehicles. Different payloads, wheelbases and engine outputs from the MAN TGS and TGX series can be put together as required for the tractor vehicles and semitrailer tractors. Engines from the D38 engine range, including 540 hp, 580 hp and 640 hp, and boasting high performance and torque, are installed exclusively on the MAN TGX platform. The top-of-the-range versions have 640 hp and drive a 4-axle heavy-duty semitrailer tractor. The 4-axle MAN TGX 41.640 8x4/4 BBS combines the most powerful version of the D38 engine and the MAN TipMatic with the standard converter-clutch unit. This increases the input torque from 3000 Nm up to 4740 Nm. As a result, even the heaviest loads move off smoothly but powerfully. The converter-clutch unit enables particularly precise manoeuvring of the vehicle in tight spaces, on inclines and with heavy loads. Forestry & Agriculture sector For freight operators moving short timber, MAN offers some interesting vehicle concepts in its TGS and TGX series. Moving timber away from where it has been stacked can be quite challenging. If the track is muddy or there is a climb, an all-wheel drive may be essential. But when driving to the sawmill on a tarmac road, a rear wheel drive is sufficient and far more economical. MAN's solution is the switchable hydraulic front wheel drive. The MAN system, called HydroDrive, has been very well received by timber transporters ever since it was introduced in 2005, as it is so practical. What is new now is that MAN has further increased its range of options. Combining the automatic gearbox TipMatic with the MAN HydroDrive saves the driver from having to change gear. With a self-propelled wood chipper, the operator can move about flexibly and change location quickly and easily to work through other jobs. The high engine power that is required to drive the chipper uses a powerful PTO fitted at the factory with up to 8000 Nm of torque. This saves the additional weight and expense of installing and maintaining a separate motor. The vehicle remains compact and manoeuvrable. To drive the wood chipper, MAN offers its D26 engine series with outputs of 420 hp, 460 hp and 500 hp, in combination with the new TipMatic 12 Offroad gearbox. Beyond that, in the MAN TGX series, the D38 engines range from 520 hp to 640 hp. The 6x6 chassis in the MAN TGS series have excellent all-terrain capability so that they can reach chipping sites which are often away from tarmac roads. A very compact, manoeuvrable and high-traction chassis design is the 3-axle version with all-wheel drive on the front axle and articulated trailing axle. Its axle configuration is 6x4-4. An interesting feature is the extensive modifications to the driver cabs. This means there is no need for an extra cabin from which the operator controls the crane and the chipper. The MAN Truck Modification Centre has designed various modified cabs for this purpose. In the agricultural sector, transport tasks can be many and varied. MAN trucks can be used for transporting harvested crops, from grain to agricultural dealers, silo corn to the biogas plant, beet to the sugar refinery or potatoes to the starch plant, right from the edge of the field. In addition to this, utilising trucks for the short distances between farm, field or storage areas can also be worthwhile. They offer distinct advantages in the transportation chain compared to tractors with trailers, due to their higher payload of up to 40 tonnes, lower fuel consumption and the higher speeds typical of trucks. In most cases, these will be semitrailer tractors in the MAN TGS series, pulling trailers specially designed for agricultural use. The wide range of vehicles in the MAN product range ensures that the right vehicle for the topography, soil conditions and transport distance can always be found. There are traditional semitrailer tractors with rear wheel drive and standard or medium-high design height. All-wheel drive semitrailer tractors in high design height with switchable or permanent front wheel drive are also available. The solution which meets in the middle is called MAN HydroDrive, with hydrostatic front wheel drive for additional traction. The engines that are fitted in the MAN TGS range from 320 hp to 500 hp. Municipal & fire brigade sector Approximately 20 municipal vehicles for the refuse collection, winter service, road maintenance and fire brigade sectors were on display. The range of chassis versions - usually based on MAN TGM and TGS - and body manufacturers was equally varied. Among the sector-specific features offered by MAN, the TipMatic Collect is particularly important on refuse collector vehicles. The new automated gearbox incorporates gear shift strategies specifically designed for rear and side loaders. On the collecting round, frequent starts in order to drive just a few metres to the next collection point alternate with longer stops while the loading hydraulic system is working. The gearshift behaviour is faster and the moving-off gear is selected by the driver so the clutch is protected. On the chassis of the side loader based on the MAN TGS, the MAN engineers have changed the layout of the complex Euro 6 exhaust technology, the diesel and AdBluetank, and the compressed-air tank. In this way, they have made space to mount the side loading device. The snow blade, winter service spreader and loading crane are supplied by a high-performance hydraulic system. The air suspension on the rear axle that is standard on the all-wheel drive MAN TGM - with permitted gross weights from 14.1 to 15 tonnes - ensures that the de-icing agents are evenly spread. The MAN TGM also has a particularly small turning circle. This makes snow-clearing in built-up residential areas with many parked cars easier for drivers. At the Trucknology Days, MAN was demonstrating a suction dredger on a 4-axle MAN TGS 35.480 8x4-4 BL. Suction dredgers can be used, for example, on construction sites to dig holes and trenches or expose foundations, by municipal authorities to clear blocked drains, or in horticulture and agriculture for carefully exposing root balls. Space has to be found on the 3- or 4-axle carrier vehicle from the MAN TGS series for the ventilation system, the tank for the extracted material, the jib for the suction pipe and its extensions and the filter system for cleaning the suction air. The fans that create the vacuum are driven by the powerful vehicle engine from the D26 engine series, via the PTO. In most parts of Germany, fire brigades are still permitted to use vehicles meeting the Euro 5 emissions standard. MAN offers a range of chassis for emergency services vehicles, meeting different emissions standards. That is why MAN is guaranteeing that production of the engine in the D08 series that is used by fire brigades will continue in the Euro 5 version until at least 2020. This engine, which does not require any additives to clean the emissions, is used in the TGL and TGM series. This flexibility is reflected in the fact that emergency services vehicles in both Euro 5 and Euro 6 versions will be on display at the Trucknology Days. HydroDrive combined with TipMatic is also important for fire brigades and waste disposal companies as an additional product in the hydrostatic front-axle drive range. Typical vehicles for this combination are swap body trucks. A new feature for fire brigades is that the Emergency gearshift program for emergency services vehicles is also available with the new TipMatic in the MAN TGS and TGX series. The roomy crew cab, seating a maximum of seven people, is very popular with users of municipal and fire brigade vehicles. It is available in MAN TGL and TGM series vehicles. Its four-seater bench consists of a seat with individual backrests, headrests and three-point belts. Two seats with integrated breathing apparatus can easily be accommodated in this cab. This means the crew can equip themselves en route to the incident and no time is lost when on rescue or fire-fighting missions. MAN Trucknology Road Show Since 2008, the Trucknology Days have traditionally been the starting signal for the new truck demonstration fleet at the 'MAN Trucknology® RoadShow 2017'. Nearly 52 vehicles from the TGL, TGM, TGS and TGX series will go on tour throughout Europe. They demonstrate the new features introduced in the 2017 model year in the interior and on the driveline. The complete vehicles with bodies or semitrailers will present a cross-section of the variety available in the distribution and long-haul transport, construction, heavy-duty transport, agriculture, forestry and municipal sectors. MAN sales organisations throughout Europe will present their fleets, painted in striking crimson, at events and demonstrations. Interested customers can arrange with their MAN salesperson to test drive these vehicles for several days. In this way, they can experience MAN's competence in the sector and see for themselves how efficiently and economically transport tasks can be dealt with. Trucks to go The ‘Trucks to go’ fleet was on show in front of the Truck Forum during the Trucknology Days. These are new vehicles in the MAN TGL, TGM, TGS and TGX series, with bodies from MAN-approved body manufacturers. Anyone who is interested can download information about the 'Trucks to go' product range from the website www.man-truckstogo.com. The advantage for the customer is that they can meet short-term demand and respond to orders they receive without having to allow for the usual delivery times for vehicles. Complete vehicles such as roll-off skip loaders, three-way tippers and truck mixers or special-purpose vehicles such as refuse collector vehicles and towing vehicles are all available. This range of vehicles is available throughout Europe, painted in neutral white or in orange for municipal applications. If you enter the vehicle configuration you require, the 'Trucks to go' home page lists the appropriate vehicles. MAN has sold more than 1200 trucks in the last two years via this marketing channel. Photo gallery - http://www.corporate.man.eu/en/press-and-media/presscenter/MAN-Trucknology_-Days-2017_-Connected-Performance-282880.html

Daimler Press Release / March 27, 2017 German truck driver Friedhelm Schäfer emigrated to Finland eight years ago. Since then, he has been driving his four-axle Mercedes-Benz Arocs with a nine-axle truck/trailer combination for a Finnish lumber transport company. His daily load comprises 76 tonnes of lumber, which he transports distances of between 80 and 280 km on snowy and icy roads at minus 20°C. In tricky conditions like these, Friedhelm Schäfer really appreciates the handling, comfort and winter performance of his 630 horsepower Arocs, his trusty companion across Finland's prairies. .

Daimler Press Release / March 27, 2017 Al Khaldi Transport Group (Damman, Saudi-Arabia) orders 540 medium and heavy duty Mercedes-Benz trucks Mercedes-Benz models Actros, Atego und Accelo will be operating in energy and infrastructure sector All 540 trucks come with a full service and maintenance contract Stefan Buchner, Head of Mercedes-Benz Trucks: „It is our clear ambition at Mercedes-Benz to build trucks fulfilling highest standards and requirements delivering quality and excellence to our customers. The latest major order of approx. 540 Mercedes-Benz trucks by our standing customer Al-Khaldi Transport further proves that we succeed in our ambition. This fleet deal is also the result of our new Regional Center MENA in Dubai, which makes us even more effective in the Middle East and in North Africa – not only in sales, but also in customer services.” Dubai – For the toughest transport business you need the best trucks. That might have been the ratio for Saudi transport group Al Khaldi from Damman (Kingdom of Saudi-Arabia) to vote again for medium and heavy duty trucks from Mercedes-Benz signing a purchase order for approx. 540 units on March 23rd in Dubai. With this deal the Al Khaldi transport group increased their total fleet of Mercedes-Benz trucks to approx. 1,045 units. The Mercedes-Benz models Actros, Atego und Accelo will be operating in the energy and infrastructure sector in the Gulf region. With its extreme weather conditions the region around Saudi Arabia and the Gulf states is supposed to be the most challenging terrain for trucks on and off road. „It is our clear ambition at Mercedes-Benz to build trucks fulfilling highest standards and requirements delivering quality and excellence to our customers. The latest major order of approx. 540 Mercedes-Benz trucks by our standing customer Al-Khaldi Transport further proves that we succeed in our ambition. This fleet deal is also the result of our new Regional Center MENA in Dubai, which makes us even more effective in the Middle East and in North Africa – not only in sales, but also in customer services,” emphasized Stefan Buchner, Head of Mercedes-Benz Trucks, present at the signing in Dubai. Customized Service Package for maximum reliability Offering transport services for oil fields, construction sites and the chemical industry since 1972, the Al Khaldi Transport Group ordered the vehicles with a customized support package, including service and maintenance, comprehensive trainings for drivers and mechanical engineers and a 24/7 roadside assistance guarantee. The Kingdom of Saudi Arabia is a core market in the MENA region for Mercedes-Benz trucks, with more than 43,500 Mercedes-Benz trucks delivered by the local retail partner Juffali Industrial Products Company (JIIPCO) since 2002. Mercedes-Benz’ reputation builds on a long standing heritage – the brand holds a leading position in the market of heavy duty road transportation. Stronger customer focus with Regional Center DCV MENA The major Al Khaldi order is another proof for successful sales and services activities of Daimlers Regional Center Middle East North Africa (DCV MENA) located in Dubai. With its further regionalization since 2015 the business is even closer to the market beat, capitalizing on long standing product and service competence combined with the broad vehicles portfolio of Daimler Commercial Vehicles. DCV MENA sells trucks, vans and buses from the company’s brands Mercedes-Benz, FUSO and Setra. .

Two mobile devices help you to stay connected Volvo Trucks Press Release / March 27, 2017 See how easily you can combine your work and private communication with hands-free access. Welcome to Volvo Trucks system for services and infotainment. Volvo Trucks system for services and infotainment combines easier navigation and more efficient fleet management with quality audio entertainment. Learn more: https://youtu.be/XJWvlsxYHvE .

.

.