kscarbel2

“While in the United States, some of the September 11 hijackers were in contact with, and received support or assistance from, individuals who may be [are] connected to the Saudi government” Congress of the United States January 29, 2003 .

Ford HN80 full-size clay model sculpted by Ron Williams. .

Running 15W40 in a Corolla is terrible for the engine. Some oil companies promoted 15W40 oils they use in everything, but in truth, it wasn't the ideal oil for gasoline engines. From 2010, as a result of new oil technology, the global standard for most American and Japanese cars is 0W-20. You'll get better fuel economy, and folks in colder climates can turn over the car easier on frigid mornings.

Owner/Driver / March 20, 2017 Since the Drought Angels kicked things off in 2014, co-founders Nicki Blackwell and Tash Johnston have endeavoured to provide aid to as many struggling regional areas as possible. The Drought Angels’ work is made possible by generous truckies, donations, and a host of volunteers. The first run of 2017 is set to help 23 families doing it tough in Auburn on April 1, offering up hay, cotton seed, dog food, and stock feed. Administrator and social media volunteer Kylee Lyon says it’s all about helping communities that need it most with face-to-face support. "Drought Angels have been doing this for three years and our focus is really helping one community at a time," Kylee said. "We’ve grown a lot over the past 15 months, and we’ve now helped 11 communities across the three years." Kylee emphasised the Drought Angels’ need for donations, all of which are used to help pay fuel costs for the trucks, farming supplies and local store vouchers. "We’ve got six trucks helping us for the Auburn run, all owner drivers," she said. "We are still trying to raise funds because we try and give the drivers fuel money and it’s only possible with donations." Drought Angels co-founder Tash Johnston says the reason for choosing Auburn is based around the lack of rain the region has seen in recent times. "In the last couple weeks these guys have had a little rain, but nowhere near enough – they haven’t had proper rain for about two years now," Tash said. The Angels are planning on a doing a couple more runs across 2017, but Tash says at this stage they’re still deciding where they’ll go based on donations. The hay for the Auburn run was purchased and is set to be transported on the day, but the Angels also have hay in Kerang, Victoria, that needs to make its way to some south-west Surat properties. "We still need trucks to help get us the hay from Kerang to the Surat region," Tash said. "We would probably need about half a dozen but we cover freight costs, we just need people willing to donate their time and truck." If you’re able to assist with carting hay from Kerang to south-west Surat, email the Drought Angels on droughtangels@gmail.com.au To help make the Auburn visit a successful one, and to help the Angels get to more regions across the year, tax-deductible donations can be made at http://droughtangels.org.au/product/make-a-donation-drought-angels/ .

Steve Brooks, Trade Trucks AU / February 6, 2017 Steve Brooks road tests the new MAN TGX with the new 15.2-litre D38 engine. No doubt about it, MAN’s flagship TGX model with the recently released 560hp D38 engine is a fine truck with plenty of positives. However, the big issue for MAN and its Penske Commercial Vehicles distributor is not the truck itself. It’s the fierce level of competition in a market jam-packed with fine trucks, including some big names with big resources. Breaking through the barriers won’t be easy but perhaps now more than ever before, MAN at least looks ready to rumble. And arguably the biggest indicator of a revitalised MAN effort came at the Mt Cotton driver training facility in Brisbane towards the end of last year with both the official introduction of the 560hp D38 engine in MAN’s TGX 26.560 flagship model and the appearance of the somewhat legendary Roger Penske. It was Penske’s first appearance at an Australian truck media event since the formation of Penske Commercial Vehicles almost four years earlier and as we reported at the time, ‘… there’s certainly something noteworthy in the fact that Roger Penske chose the introduction of the D38 to make his first appearance at a commercial vehicle presentation.’ His appearance at the event and strong support for the German brand certainly dulled any speculation that MAN would take a secondary role behind Penske’s other star attraction, Western Star. Quick to shrug off MAN’s inconsistent history in this country, Penske said simply, "I’m not looking back, I’m looking forward. "There is a trend to this type of truck," he said emphatically of the latest MAN, citing a fully integrated engine, automated transmission and driveline package as the increasingly preferred choice of truck operators at all levels but most prominently, among major fleets. The emphasis, however, went up a few notches when talk turned to service and support functions, and dealers specifically. Stating the obvious, "This is a very competitive market," Penske professed, "and things like fuel economy and service are the big ongoing issues today. "We have to get better in our own business. We’re going to ask a lot more of our dealers, and if they don’t stand up, then we’ll do it with our own dealers." Therein, of course, resides a ‘make or break’ factor in MAN’s future prospects under the Penske banner. Good or otherwise, trucks are just one part of the picture and in this "very competitive market", service and support are often the deciding factors in whether a customer comes back for more or goes shopping elsewhere. Given the level of competition, it won’t be an easy road but the new 560hp TGX flagship has a healthy regard for fuel efficiency and will certainly go a long way towards softening the bumps. Maiden Voyage It may not be everyone’s idea of a desirable colour scheme but if the aim was to stand out in the crowd, then the bold black, grey and slashing red graphics of the TGX 26.560 test truck sure had the desired effect. Even so, MAN product and operator training manager Steve Gibbins had the truck and Penske B-double outfit superbly prepared for what he quickly explained would be its maiden linehaul voyage, hauling a tad less than 62.5 tonnes down the Pacific Highway from Brisbane to near Newcastle. Maiden voyages, of course, aren’t particularly conducive to good fuel figures but it was an entirely confident Steve Gibbins who espoused the firm belief that fuel consumption would be one of several notable features of the TGX with its new 15.2-litre engine. Obviously, time and toil would tell soon enough. Meanwhile, inside the cab it was time to take stock and after an easy climb into the broad expanse of what MAN terms its XLX high-roof sleeper cab, a few things were quickly apparent. For starters, the steering wheel is probably bigger than anything else on the market but then, that’s not necessarily a bad thing. After all, a small wheel in a big Euro cab with supple suspension can create twitchy steering response but as the big MAN soon showed, steering quality and road handling on the Pacific’s various pavements were entirely acceptable. On the arms of the wheel are control buttons for a wide range of on-board functions and information systems, but operational logic isn’t as straightforward as some. Familiarity takes time and patience. Likewise, while the interior layout is for the most part practical and comfortable, there are definitely areas where the TGX cab is lagging behind more recent designs. For instance, while the modest rise in floor height above the engine is not particularly intrusive and there’s at least standing room for six-footers, the design and location of a fridge and storage bin protrude considerably into standing space between the seats and subsequently infringe on access to the bunk. As for the bunk, it wasn’t ‘tested’ on the daylight run south but even a cursory look suggests it’s equal to most of its continental competition. Still, you’re left to wonder about the wisdom of the upper level second bunk in a cab not particularly conducive to two-up work. Meantime, the transmission control knob on a pedestal beside the driver’s seat isn’t necessarily intrusive but it certainly lacks the ergonomic ease of more modern contemporaries. Put simply, the TGX cab is in some areas showing its age. That said though, the standard feature list is appealing with a high quality Isri driver’s seat, touchscreen stereo with integrated Bluetooth and USB, electric windows and likewise, electrically operated heated mirrors. Yet like many mirror designs these days, particularly in the cab-over class and most notably at roundabouts, forward vision at the front quarters is impeded by the depth and width of mirror frames. Back on the plus side, there’s the undeniable benefit of a ‘hill hold’ function which makes hill starts easy on driver and driveline alike, especially with a full load on board. For all the odds and sods there are ample storage recesses above the windscreen while spacious under-bunk storage is also accessible through outside lockers. Definitely a notable asset is a ‘light test’ function which, as MAN puts it, ‘cycles through all lights on the truck and trailers, allowing the driver to safely check operation.’ Typical of the continental class, safety rates high on the list of standard inclusions with items like electronically controlled disc brakes all-round, ABS anti-lock, electronic stability control, ASR anti-skid, front cornering lights, and deformable cab mounts which, as MAN states, ‘allow the cab to move rearward while absorbing the energy of a collision.’ For the really safety conscious, there’s an optional Safety Pack Active+ kit with systems called Emergency Brake Assist, Lane Guard, Active Cruise Control and Emergency Stopping Signal. All fine features, of course, and all fitted to the test truck, but from a purely pragmatic viewpoint it’s the powertrain and driveline where MAN has most to crow about. Good spec For starters, the TGX 26.560 comes with a gross combination mass (GCM) rating up to 120 tonnes (and more with engineering approval) and importantly, MAN insiders eagerly extol the success of cooling trials at even higher weights during early testing of the D38 engine. In simple terms the D38 is a 15.2-litre, twin turbocharged and intercooled in-line six with common-rail fuel injection and Euro 6 emissions levels achieved with the combined inputs of SCR and EGR, and a modified diesel particulate filter known as CRT. It is, says MAN, ‘a continuous regenerative system’ which negates the need for servicing of a typical diesel particulate filter. For its first foray on the Australian market, the D38 delivers 412kW (560hp) at 1800rpm and pugnacious torque of 2700Nm (1991 lb ft) on tap all the way from 930 to 1350rpm. Importantly, it also offers up to 600kW of retardation power through a graduated and highly effective retarder. Coupled to the engine is the latest evolution of the ZF-developed MAN TipMatic 12-speed overdrive automated shifter, otherwise known as TipMatic2 or Traxion. While there are a number of new features, the great attraction of the upgraded shifter is unquestionably the exceptional speed and smoothness of each shift, and a grade-sensing intuition which is nothing less than remarkable. Top marks! Putting the grunt on the ground is a hypoid drive tandem with diff locks and power divider mounted on an eight-bag electronically controlled air suspension. Diff ratios are 3.08:1 to 3.76:1, aimed mainly at single trailer and road train roles respectively, and 3.36:1 for linehaul B-double combinations such as the test unit. As the run south quickly revealed, the 3.36 diff ratio delivers 100 km/h at a touch under 1350rpm and combined with an overdrive transmission obviously programmed to provide the best blend of fuel efficiency and pulling power, allows the D38 to do the vast majority of its work below 1500 rpm. Sure, there were instances when the approach to a long climb provoked a swap to manual mode for an early downshift, but for the most part it was easy to feel entirely content with the automated MAN’s ability to run low into the rev range yet make the right shift at exactly the right time. And again, the speed and smoothness of the automated shift are second to none. Very impressive! Consequently, early indications were that fuel consumption would be extraordinarily good. The on-board computer, for example, revealed an exceptionally frugal fuel return of 2.16 km/litre (6.1 mpg) for the 310 km between Brisbane and North Grafton. However, 300 km further on at Coolongolook, consumption had peeled back to 2.07 km/litre (5.8 mpg) as the undulating terrain, road works and the slow, sharp grinds through Coffs Harbour took their collective toll. Things didn’t change much over the next 150 km to or so to the NorthStar dealership at Heatherbrae where overall fuel consumption for the 760 km trip was a highly respectable 2.06 km/litre. When it’s all boiled down, the 560hp D38 engine gives MAN two vital attributes: a truck with more muscle than ever before, and top-shelf fuel efficiency. Sure, a design upgrade of the TGX cab both inside and out wouldn’t go astray and some might argue that a 15-litre engine in this day and age should be dispensing more than 560hp. Fair enough, but it’s still a comfortable, well-appointed truck with good road manners while on the performance front there are already indications that Penske’s MAN team has plans to bring higher powered versions of the D38 to the Australian market within the next year or so. In the interim, there’s no denying the 560 rating has the potential to enhance the brand’s standing in the market, particularly in B-double roles. Again though, a good truck is only part of the picture. Any doubts, just ask Roger Penske! .

Smithsonian Channel Air Warriors: B-52 https://www.youtube.com/watch?v=dZmOlCv6HEM

Hino is a world class truckmaker. Isuzu offers the best value for the dollar, but Hino offers the most advanced truck (of the Japanese brands).

At 0:33 in the second video (customer interview), note the SinoTruk (aka. CNHTC) 70-ton off-highway dump in the background. .

Hino Trucks USA / March 19, 2017 NOT JUST ANY PAINT. We’ve partnered with Axalta, a global leader in OEM and truck paint for over 150 years and are pleased to now offer 50 standard, and unlimited custom, colors for all Hino Conventional Models in the USA. Talk to your Hino Dealer about harmonizing your fleet with new Hino factory paint options. .

Reuters / March 20, 2017 Navistar International Corp (NYSE:NAV) major shareholder Carl C. Icahn purchased 34,032 shares of the business’s stock in a transaction that occurred on Tuesday, March 14th. The stock was acquired at an average price of $25.77 per share, for a total transaction of $877,004.64. The purchase was disclosed in a document filed with the SEC, which is accessible through this hyperlink. Major shareholders that own 10% or more of a company’s shares are required to disclose their sales and purchases with the SEC. Shares of Navistar International Corp (NYSE:NAV) opened at 27.49 on Monday. The firm’s market capitalization is $2.70 billion. Navistar International Corp has a 12 month low of $10.30 and a 12 month high of $33.46. The stock’s 50 day moving average price is $27.12 and its 200-day moving average price is $26.13. Navistar last posted its earnings results on Tuesday, March 7th. The company reported ($0.76) EPS for the quarter, missing the Thomson Reuters’ consensus estimate of ($0.43) by $0.33. The business had revenue of $1.66 billion for the quarter, compared to analysts’ expectations of $1.72 billion. Navistar International Corp’s revenue was down 5.8% on a year-over-year basis. During the same quarter last year, the firm earned ($0.40) earnings per share. On average, equities analysts anticipate that Navistar International Corp will post ($0.13) earnings per share for the current fiscal year.

Heavy Duty Trucking / March 20, 2017 Ford is recommending the use of a new Motorcraft diesel engine oil for its Super Duty trucks and warning fleet and commercial customers to avoid using most new CK-4 or FA-4 oils because they may cause damage to the engine, the company told AutomotiveFleet.com. Motocraft's WSS-M2C171-F1 formulation should be used in all Power Stroke diesels, especially the 6.7L that powers the F-250, F-350, and F-450, because it better protects the engine against high-mileage wear, according to Ford. Ford had previously recommended CJ-4 formulations for its Super Duty trucks. On Dec. 1, the American Petroleum Institute began licensing the new CK-4 and FA-4 oils. CJ-4 oils will eventually be phased out. Commercial users should avoid the FA-4 formulation due to its low viscosity. CK-4 motor oils should be avoided because they provide "inadequate wear protection," according to a statement. The oil certification information is located on the back of an oil pouch in a circle known as the API donut. Customers should NOT use oils labeled CK-4/SN unless they have been approved by Ford to meet WSS-M2C171-F1. This is possible with SAE 10W-40, 15W-40, 5W-40 and 0W-40 oils. SAE 10W-30 oils showing CK-4/SN cannot meet WSS-M2C171-F1. Motorcraft Super Duty diesel motor oil is formulated with premium hydroprocessed base oils and additive technology necessary to meet WSS-M2C171-F1. This new oil also meets the requirements of Cummins CES20086, Detroit Diesel 93K222, Volvo VDS-4.5 and Mack EOS-4.5, according to Ford. .

Trump order prompts FMCSA to further delay effective date of rule setting national driver training standards James Jaillet, Commercial Carrier Journal (CCJ) / March 20, 2017 The effective date of a rule establishing nationwide minimum training standards for entry-level truck drivers has been further delayed due to ongoing regulatory review by President Trump and his staff. The rule will now take effective May 22 according to a notice scheduled to be published March 21 by the Federal Motor Carrier Safety Administration. The rule was originally slated to take effect Feb. 6, with a compliance date of Feb. 7, 2020. The rule’s February 2020 compliance date does not appear to be affected by the delay in its effective date. FMCSA published a notice Feb. 1 delaying the rule’s effective date to March 21. The notice slated for March 21 publication extends the delay two more months, however, “to provide the opportunity for further review and consideration of this new regulation,” according to FMCSA’s notice. The delay stems from an order issued by Trump on Jan. 20. The order froze all pending regulations, encompassing FMCSA’s driver-training rule, which had been published but was not yet effective. The entry-level driver training rule sets a core classroom curriculum for those seeking a CDL. It also requires behind-the-wheel training, but to the chagrin of some trucking industry groups, it does not require a minimum amount of behind-the-wheel training time. The agency’s initial draft of the rule required 30 hours of behind-the-wheel training, but that provision was removed in the rule’s final draft. The rule also will establish a national registry of certified trainers. CDL trainees must be trained by a trainer in the registry to qualify to receive a CDL.

Heavy Duty Trucking / March 20, 2017 The Peterbilt Models 520 and 320 equipped with the Cummins ISL-G Near Zero engine have been granted eligibility for the California Air Resources Board (CARB) Hybrid and Zero-Emission Truck and Bus Voucher Incentive Project (HVIP). HVIP encourages the commercialization of low-emitting hybrid and zero-emissions trucks by assisting fleets with the purchase of these advanced technology vehicles. Peterbilt introduced the Cummins Westport ISL-G Near Zero NOx emissions natural gas engine in the Models 520 and 320 in 2016. NOx emissions in the ISL-G Near Zero engine emissions are 90 percent lower than the current EPA limit. The ISL-G Near Zero engine emissions are 90% lower than the current EPA NOx limit through the introduction of a three-way catalyst in the after-treatment, advanced engine calibration, and a closed crankcase ventilation system (CCV). The new engine’s performance and efficiency match the current ISL-G, with 320 hp and 1,000 lb.-ft. torque available. Industries that will most benefit from the new option include linehaul, vocational, and refuse applications. Similar to the currently available ISL-G engine, the ISL-G Near Zero operates on 100% natural gas, which can be carried on the vehicle as either compressed natural gas (CNG) or liquefied natural gas (LNG). The new ISL-G Near Zero can also run on renewable natural gas (RNG). “Peterbilt is a leader in environmentally-friendly solutions for the industry,” said Robert Woodall, Peterbilt Assistant General Manager of Sales and Marketing. “Eligibility for the HVIP voucher will allow customers participating in the program to benefit from the advanced technology and rugged durability of the Models 520 and 320." The 2018 Models 520 and 320 will be eligible for HVIP when spec’d with the Cummins ISL-G Near Zero engine with a GVWR of 33,000 – 80,000 pounds. For more details, visit https://www.californiahvip.org/. .

Transport Topics / March 20, 2017 Volkswagen's truck division aims to significantly increase its profitability this year as deepening cooperation between the MAN and Scania brands and improving overseas markets spur business, the company said March 20. Volkswagen, which launched a new truck and bus division in 2015 to challenge global rivals Daimler and Volvo is targeting a long-term operating margin target of 9%, up from 6.1% last year. "We are not striving to become a volume champion [i.e. Volvo], we want to be the most profitable ones," CEO Andreas Renschler told journalists, referring to improving markets in Western Europe, Russia and China. But Matthias Gruendler, head of finance, made clear a significant improvement in financial results requires a rebound in the key Brazilian market where the VW division commands a 37% share of the country's commercial-vehicles market. Overall truck and bus sales in Brazil have been falling for four years, but demand is expected to rebound slightly in the second half of the year amid the improving economy with a chance for stronger growth in 2018, Gruendler said. "Brazil has always been an important market and is characterized by a high degree of cyclicality," Andreas Renschler said. Under Renschler, who ran Daimler Trucks before joining VW in February 2015, Europe's largest automotive group has also been seeking to expand its footprint in international truck markets. Last year, VW announced a stake purchase in U.S. truck maker Navistar International Corp which may earn the German group access to the vast North American truck market, and is also in talks about finding a new partner in China. "We are currently in discussions about different opportunities," Renschler said. "All options are open" including a possible increase in MAN's stake in China's Sinotruk and finding a new partner.

An incredible amount of data here. Check out the statistics in your own backyard.

The Guardian / March 20, 2017 The Guardian is releasing a new set of nationwide data for 2015, which can be used to do analysis of how gun murder clusters within neighborhoods We spend a lot of time talking about which cities see the most gun violence. But analyzing gun violence at the city level is very misleading. Gun violence is much more local than that. The Guardian is releasing a new set of nationwide data for 2015 that maps gun murders at the micro level – down to the local census tract. You can use this data to do analysis of how gun murder clusters within neighborhoods in your city or state. Our analysis was possible thanks to the not-for-profit Gun Violence Archive (GVA), which tracks shootings and gun deaths using media reports. This data set includes the latitude and longitude of each shooting incident. We mapped each of these geolocated gun murders to a census tract – which means that there’s a wealth of demographic data connected to each census tract, allowing you to analyze the levels of poverty, educational attainment and other factors in neighborhoods where gun murders happen. This article contains the data we used to conduct this analysis. We invite you to download this data and use it for further analysis and reporting. If you use this data, please make sure to credit the Gun Violence Archive and the Guardian. Using this data, the Guardian found that half of the United States’ gun murders in 2015 were clustered in 127 cities (Want to fix gun violence? Go local). We also found that violence was concentrated even further than simply the city level: census tract areas that contain just 1.5% of the country’s population saw 26% of America’s total gun homicides. We appended a few other fields to the existing GVA data. Using the FCC’s Census Block Conversion API, we placed each incident within its proper census tract. With the census tract identified, we used the Five-Year American Community Survey 2014-2010 to find demographic information for the tracts. We also determined the land area of each tract with the US Census: Cartographic Boundary Shapefiles – Census Tracts. We’ve also included a separate easy-to-use file of FBI murder data from 1985 to 2015. If you have questions about the data, please email gundata@theguardian.com. If you use this data to do your own analysis – whether you’re a journalist or a community organization – please let us know, and send a link to your final project to gundata@theguardian.com, or contact our reporters directly: lois.beckett@theguardian.com and jamiles.lartey@theguardian.com. Get the data Each file is a .csv, which can be opened in Excel and Google Sheets, in addition to the text editor of your choice. All GVA data is from 2015, but you can obtain data from 2014 to the present by going to their website or following them on twitter @gundeaths for daily updates. Incident-level data – each row includes a gun homicide incident. City-level data – each row includes a city or county (depending on how it was reported by the GVA), as well as counts for incidents and people killed. Tract-level data – each row includes a census tract, as well as counts for incidents and people killed. Previous stories have made use of UCR data, which we obtained from the FBI. City-level murder data from 1985-2015 – each row is a city, and includes the murder rate and raw number of murders for each year from 1985-2015. Some years are missing for cities. National data on city murder statistics from 2016 will not be available from the FBI until the fall of 2017. Download a description of all of the above data files with notes here.

Trump administration: These police agencies didn’t help feds with deportations The Washington Post / March 20, 2017 Homeland Security officials on Monday unveiled the administration’s first list of law enforcement agencies that refused to detain jailed immigrants beyond their release dates so that the federal government could take them into custody and try to deport them. The List - https://www.scribd.com/document/342469185/ICE-Declined-Detainer-Outcome-Report-Jan-28-to-Feb-3-2017#from_embed Federal officials, who spoke on the condition of anonymity in a conference call with reporters, said local agencies, including some in Maryland and Virginia, failed to honor 206 detention requests from Jan. 28 to Feb. 3. President Trump in January ordered Homeland Security to issue a weekly list of crimes committed by non-citizen [illegal] immigrants and to identify agencies that refused to hold those people in jail on civil immigration-violation charges until federal agents could pick them up. “These numbers will continue to go up,” a Homeland Security official said. “There is a clear public safety issue here that will only be further illuminated as we go forward.” Advocates for immigrants say it is unconstitutional for local police to detain someone for a civil deportation proceeding when the judge in their criminal case has ordered them released. “This is part of an overall strategy to try to scare jurisdictions into becoming deportation agents,” said Cody Wofsy, a staff attorney with the American Civil Liberties Union’s Immigrants’ Rights Project. “And the truth is that jurisdictions have the legal right to refuse to become entangled with the federal immigration enforcement system.” Trump has threatened to withhold federal funding from what are called sanctuary cities, where local law enforcement agencies do not cooperate with the U.S. Immigration and Customs Enforcement bureau, but officials said they hoped such jurisdictions would start cooperating with federal agents instead. Officials identified 118 such agencies in the report Monday, though they cautioned it was preliminary. The National Immigration Law Center (NILC) estimates that 600 jurisdictions limit their cooperation with ICE, in most cases because they do not want immigrants to fear the police or be deported for minor traffic offenses. Homeland Security officials cautioned that the report offered only a snapshot of a week’s worth of detainers — requests from ICE to a law enforcement agency to hold an immigrant for up to 48 hours after they are released on bail so that immigration agents can take them into custody and seek to deport them. The report did not identify the alleged criminals affected by the declined detainers, but officials said many had been arrested for serious crimes, including aggravated assault and homicide. Most detainers were issued for citizens of Mexico, followed by Honduras. Some local law enforcement agencies suggested Monday that the agency’s methodology is flawed. More than 60 percent of the declined detainers were from Travis County in Texas, which on Feb. 1 adopted a policy limiting its cooperation with ICE. Major Wes Priddy, of the Travis County Sheriff’s Office, said the agency does detain criminals convicted of serious crimes for immigration officials. But he said his department does not turn over people awaiting trial. “We do honor ICE detainers. But we do it selectively and in a manner which we can abide by our policy,” Priddy said, adding that in the past, immigration officials have deported people before trial, depriving defendants of their day in court and, in some cases, denying closure to crime victims. “We want to make sure that justice is served on the local level as well.” Jessica Vaughan, director of policy studies for the Center for Immigration Studies, said the list is an attempt to pressure localities to change their policies and inform the public that sanctuary cities sometimes release serious criminals. When he signed the Jan. 25 executive order intensifying deportation efforts, Trump said jurisdictions put U.S. citizens at risk by releasing criminals who should be deported and who, in some cases, commit additional crimes after being released from jail.

Recently declassified CIA document shows that the U.S. explored multiple scenarios of Syrian regime change - decades before the start of the war in 2011. The reports contains some striking passages, and it's remarkably accurate, showing what actually went on to happen. The CIA predicted the rise of ISIS, and the ramifications, back in 2012. .

Almost half of Canadians want illegal border crossers deported Reuters / March 20, 2017 Nearly half of Canadians want to deport people who are illegally crossing into Canada from the United States, and a similar number disapprove of how Prime Minister Justin Trudeau is handling the influx, according to a Reuters/Ipsos opinion poll released on Monday. A significant minority, 4 out of 10 respondents, said the border crossers could make Canada "less safe." The increasing flow of hundreds of asylum-seekers of African and Middle Eastern origin from the United States in recent months is becoming a contentious issue in Canada. Although there has been broad bipartisan support for high levels of legal immigration for decades in Canada, Trudeau is under pressure over the flow of the illegal migrants. He is questioned about it almost every time he appears in parliament, from opponents on the left, who want more asylum-seekers to be allowed in, and critics on the right, who say the migrants pose a potential security risk. Canadian opposition parties seized on the poll results, with both those on the left and the right saying they underscored their positions. Canadians appeared to be just as concerned about illegal immigration as Americans, according to the poll, which was conducted between March 8-9. Some 48 percent supported "increasing the deportation of people living in Canada illegally." (For graphics on asylum process, immigration poll see tmsnrt.rs/2nyY8CJ) When asked specifically about the recent border crossings, the same number - 48 percent - said Canada should "send these migrants back to the U.S." Another 36 percent said Canada should "accept these migrants". In the United States, where President Donald Trump was elected partly on his promise to boost deportations, 50 percent of adults supported "increasing the deportation of illegal immigrants," according to a Reuters/Ipsos poll conducted in the same week. "There are so many people in the world who want to come in and go through the right channels," said Greg Janzen, elected leader of a Manitoba border municipality that has seen many crossers. "That's what's pissing most people off. These guys are jumping the border," he said. "Refugees are much more welcomed when we have gone and selected them ourselves as a country, as opposed to refugees who have chosen us," said Janet Dench, executive director of Canadian Council for Refugees. Ottawa set an immigration target of 300,000 for 2017, or just under 1 percent of the population, the same level as 2016. It reduced the 2017 target [???] for resettled refugees to 25,000 from 44,800 in 2016, when it welcomed 25,000 Syrian refugees.

"He's that rarity in Washington sometimes," Obama said when nominating Comey to lead the FBI in 2013. "He doesn't care about politics, he only cares about getting the job done. At key moments, when it's mattered most ... he was prepared to give up a job he loved rather than be part of something he felt was fundamentally wrong." . . .

Bob, I think he's 500 percent right. That cab has stood the test of time. If you saw it (the cab-in-white) today for the first time, you'd think it was a fresh design. With updated grooming, it would be very competitive. I'd bet the tooling has not yet been destroyed.

The DTI11 and DTI13. They are related to the D11 and D13. In my humble opinion, Renault's versions are the best in the group. Renaults are more Renault than a Mack is a Mack. Renault is the group's best performing brand. Great people. http://www.en.renault-trucks.com/k-380-520/ http://corporate.renault-trucks.com/en/press-releases/moteurs-euro-vi-fiabilite-et-maitrise-de-la-consommation.html .

You know someone isn’t your ally when................ -------------------------------------------------------------------------------------------- Saudi Arabia orders 300 Chinese strike-capable reconnaissance unmanned aerial vehicles Defense Blog / March 20, 2017 Saudi Arabia has signed a contract for the acquisition of 300 of the newest Chinese strike-capable reconnaissance unmanned aerial long-haul vehicles Wing Loong II (also known as Pterodactyl II). China’s state-run Xinhua news agency reported on 28 February said the deal represented the “biggest overseas purchase order in the history of Chinese [UAV] foreign military sales”. But the identity of the customer and the size and value of the contract were not disclosed. The export order was revealed on the same day that the Wing Loong II completed its maiden flight. The new Wing Loong II is a long-endurance strike-capable reconnaissance unmanned aerial vehicle (UAV) developed by Chengdu Aircraft Design & Research Institute (CADI), a division of the Aviation Industry Corporation of China (AVIC). CAIG formally unveiled the Wing-Loong II during Air Show China in November 2016. The Wing Loong II has a payload of 400 kg, which can be used for armaments and/or ISR equipment. The Wing-Loong II can reach a top speed of 370 km/h and service ceiling of 9,000 m. It has an endurance of 32 hours. While observers have noted that the Wing-Loong II bore a strong resemblance to the MQ-9 Reaper, the Wing Loong II is a smaller and lighter platform than the Reaper. .

Commercial Motor TV - sponsored by DAF Trucks / March 17, 2017 .