mrsmackpaul

Theres a Mack website to ask these questions, no good me asking as it will give me the question to Macks Australian warranty But jump on there and ask the Mack people them selves "Warranty | Mack Trucks" https://www.macktrucks.com/parts-and-services/support/warranty/ Paul

Sounds like a busy summer over there We will all be waiting for the updates Paul

So were are you measuring from to get your 7 inches ? We gotta make sure we are measuring the same thing Paul

So beem thinking about this and I gather what you are chasing is either 5 or 6 spoke spider hubs with a 8 stud bolt pattern for the axle and were it bolts to the hub ? And all of this to fit on a 20 inch rim ? Am I even close If so have you looked at a 58,000pound as end on spiders as they have 8 studs on the axle end and come in 20 inch Paul

Both power Im pretty sure, grounds thru the motor Paul

Sit the engine up high enough you can sit the transmission on wood and pipe Unbolt roll away Then roll back in when your done It is lot simpler to type it here than it is to do Have a tape measure hand to measure between the faces of the bell housing and the motor to make sure you keep it square Paul

I remember what only seems like yesterday a similar style of R model and semi tipper advertised and all the tyre kickers came out I think by memory it had maybe 25000 miles from new It was a lot of coin but these things just dont come up very often and never in Australia Paul

Success, gotta be happy with that Vlad Well done Paul

KS hasnt been on here for a while now Thats a good pickup though and you probably are correct Paul

With everything going on in the world it is all to easy to forget things like this Paul Today marks the 55th anniversary of the Battle of Long Tan, which was fought on 18 August 1966. On that day, 108 Australian and New Zealand soldiers fought a pitched battle against more than 2,000 North Vietnamese and Viet Cong troops in a rubber plantation near the village of Long Tan. The Australians prevailed, but only after four hours of fighting in torrential rain. Nearly overrun, the Australians were saved by a timely ammunition resupply, accurate artillery fire from the nearby Australian base, and the arrival of reinforcements by armoured personnel carrier. Eighteen Australians lost their lives and 24 were wounded during the battle, the largest number of casualties in one operation since the arrival of the Australian task force a few months earlier. After the battle the bodies of 245 enemy soldiers were found, but there was evidence that many more bodies had been carried away. On the third anniversary of Long Tan, 18 August 1969, the men of 6RAR raised a cross on the site of the battle to commemorate those who had died. Ten soldiers who fought at Long Tan in 1966 stood on either side of the cross, flanked by two pipers, for the dedication ceremony. Following the communist victory in 1975 and the reunification of Vietnam, the Dong Nai Museum in Bien Hoa City acquired the Long Tan Cross. In 1989 the Long Dat District People’s Committee erected a replica cross on the original site. In August 2018 a permanent display of the Long Tan Cross was established in the Conflicts 1945 to Today Gallery. Find out more: https://www.awm.gov.au/commemoration/long-tan Image: Vietnam Veteran Dave Sabben at the permanent display of the Long Tan Cross when it was unveiled on 17th August 2018. Photograph by Dave Whittaker, AWM2018.4.183.63

Love it when someone's craziness comes together, looks good and is pretty darn rare Gotta be happy with that Paul

Yes Mack tinware isnt cheap A fella I know with a series 1 Superliner he has had from new reckons it only seems like yesterday you could buy a brand new E9 for 20 grand I remember Mack advertising them for that sort of money Aluminium Mack step tanks 350 bucks, should of stocked up on those Paul

It can be a Econodyne and a Maxidyne at the same time cant it ? I believe Economy name came about when Mack went away from Coolpower Paul

The gold dogs I have seen on the older Maxidyne trucks are polished up gold like the chrome dog And yes the newer gold dogs look to be just painted Paul

Spike ? , were the heck did that come from ? Trolley valve, I could sort of make that connection, but spike ? no idea 🤔 Paul

My understanding it has only been this way in recent years and as others have said gold dog Maxidyne silver Thermodyne Im guessing this stopped with the Maxidyne and was just a silver dog for many years When the MP series motors arrived on the scene is around the time that the gold dog meant all Mack drive train I'm guessing it was a way of trying to capture the past gloryof something famous and tie it into the future Paul

Definitely a neat old truck there Paul