Jump to content

mrsmackpaul

BMT Benefactor
 View Profile  See their activity

  • Posts

    6,736

  • Joined

  • Last visited

  • Days Won

    84

 Content Type 

Everything posted by mrsmackpaul

  1. mrsmackpaul
    looking pretty snazzy there Paul
  2. mrsmackpaul
    image
    Looking pretty tough
  3. mrsmackpaul
    mate I wouldnt worry about all the naysayers out there you went out and had some thats more than most people do on their weekends good for you You got the super singles donuts up front shes got the patina look going on ( we call it still in her working clothes out here ) most of these jokers would be jealous they werent along for the fun and games You keep on keeping the dream alive there Paul
  4. mrsmackpaul
    Welcome Justin The trans top cover on the high low should be able to fit out between the cab floor and the top of transmission I have the bolt the holds the selector on the high low drop out once and had the same thing as you describe happen to me Paul
  5. mrsmackpaul
    we have a few dirt roads all main highways are sealed bitumen Australia is very flat with a long way between towns once you 150km in from the east coast 100's of km between towns But Australia has a bigger area of snow then Switzerland !!! a fact I only recently learnt Paul
  6. mrsmackpaul
    lazy axels arent very common in Australia all suspension must be load sharing and I believe (but could be wrong) that back in the days of lazy axles and the load sharing requirement too many trucks would get stuck in driveways as lifting axles werent allowed because the load sharing part of the rules wouldnt have applied and since those days in the 70's they have never really caught on a few got sold but not many maybe 1 in 50 or 1 in 100 trucks at the most Paul
  7. mrsmackpaul
    aprons are always handy I reckon you can work on stuff out side hose stuff before it goes into the shed and helps to keep the shed nice and clean as well at least on the floor Paul
  8. mrsmackpaul
    looking good there Jake you fellas are pretty handy with the spray gun top work Paul
  9. mrsmackpaul
    maybe some crap out of the jerry cans went in the tank and is blocking the line or the filters got blocked as it sucked the dirtiest fuel from the tank when you almost ran out Paul
  10. mrsmackpaul
    first you got work out what the problem is I agree sounds like its sucking air have a real good look along all fuel lines for some damage maybe something has come off the governor inside the injector pump but I would check the obvious things first If you cant find a air leak hook a small drum of fuel hang it up high and try to see if you can get it to run like that Paul
  11. mrsmackpaul
    Well today been the 11th of the 11th is a solemn day in this wide brown land we as a country gave a higher percentage of men than any other country involved in some rural communities whole generations were wiped out over the war to end all war Thank you to all the men who gave so much to help to keep the world free
  12. mrsmackpaul
    you know when we milked cows they told us if the poddys keep you awake at night you havent worked hard enough LOL how them poddy calfs got out and back to their mums some nights I'll never know Paul
  13. mrsmackpaul
    NAH "YAH CANT FOOOOOOOKIN LOOSE" LOL I wondered what I had been doing wrong for all these years just what I need a good laugh in the morning about to run out and jump on the tractor I cant loose "Sugar it grows in canes cut it off and theres me sugar and it comes out of the the fooooking ground" Paul
  14. mrsmackpaul
    welcome Stina plenty of Scania's and Mack's in this wide brown land I reckon Scania started coming out to Australia in the early 70's and have been used everything from road trains to inner city delivery trucks and are held in fairly high regard Good looking ride you have got there Paul
  15. mrsmackpaul
    Tim could you get rims with a different offset dunno if it is possible but would solve a lot of the problem Paul
  16. mrsmackpaul
    well you will never know if you never try Tim Paul
  17. mrsmackpaul
    Thats what they do over here and it seems to work really well as I have said perhaps they could learn something from their Australian cousins Paul
  18. mrsmackpaul
    and the eye candy continues keep them coming Josh Paul
  19. mrsmackpaul
    I was speaking to a bloke that goes over to the states quite often and he reckons there are more Macks running on Australian roads than US roads and I think he may be right they seem to be everywhere over here he reckons you hardly see any new Macks in the states Maybe the US can learn some lessons from their Australian cousins but I doubt that the powers that be would even listen to what goes on out here Paul
  20. mrsmackpaul
    Josh grouse looking R 700 and trailer Paul dunno if you blokes use grouse might be Aussie slang http://www.urbandictionary.com/define.php?term=grouse
  21. mrsmackpaul
    well Its in everyones hands in the US to either buy a new Mack and make the company grow and show Volvo its better or dont and Volvo will have the excuse they need to shut the doors remember once those doors are shut we all have no one to blame but our selves just saying Paul
  22. mrsmackpaul
    is it coming out the joint or thru the casting or steel housing ??? might need to paint the inside of the housing or casting to seal it Paul
  23. mrsmackpaul
    Welcome to the forum could be a number of things but I would start with simple things first is the air regulator hooked up the correct way ?? did something get in the air lines when the box was out and cause a blockage ? if you apply shop air strait to the air ram on the box does it shift ok ??? Paul
  24. mrsmackpaul
    keep them both LOL
  25. mrsmackpaul
    welding heads was once very common in todays throw away world not so common you would have to find the right place most head reconditioning places should be able to point you in the right direction Once a head is welded if you really cook the motor again the crack will open up I think it has to do with different expansion rates of materials but if you dont cook the motor they last forever depending on were the crack is it is very common on cool powered Macks to have cracks but they still work fine As to your question dunno the answer, looks no one else does either might just have to try it and find out Paul

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...