mrsmackpaul

Not a truck and north America, although it does get a mention https://www.facebook.com/reel/134678686374402?mibextid=Vztt45 Let me know if the link doesn't work Paul

Im a few days late But I hope the duck had a great day, didn't get 36 light's on the Green Hornet for the big day, but got the Green Hornet back, well almost on the day Paul

So would I be correct in my understanding of this tilt tray The bumber bar light bracket doohickie has it's own hydraulic function and this also doubles as the feet or stabilizer to take the strain and stop the truck doing a wheel stand The big long ram on top pushes the tray back and gravity allows it to gently lower to the ground as point of balance changes as the tray slides back And I gather you have a hydraulic winch up the front as well in the floor of the tray Do I have any of this correct Tilt trays over there are a lot different than Australia Paul

That colour green is gunna hard to hide in from the law Paul

That's a heck of a big smile you have Enjoy the Green Hornet, so do you polish up the aluminium bits all shiny like ? Paul

Guessing is over now Looks like a collet broke, the bit the holds the valve in the valve spring keeper I have found this before on Mack E6 motor I would get the checked for cracks and make a plan from there Finding out the state of the head to me is important before making any decisions In the mean time, check everything else like push rods, cam etc and really try and nail down what is what while waiting to hear about the head Paul

Well thats good news you now no what has failed I agree with everything Geoff has said I guess a negtive ground rectifier could just mounted on some plastic isolators and still work fine if a positive ground unit is hard to come by Keep us posted on how this goes Paul

Geoff I agree with everything your saying Angelo had concerns about cost, and if changing something that isn't faulty dries up funds for what ever is faulty might not be a good outcome for him or the truck So testing and proving is essential to make the dollars go as far as they can for Angelo Paul

Yes there is Like the block rectifier, just find one with as close to the same values as the one you have These plate rectifiers aren't that dangerous, I guess to me it is like all the B.S. about split rims and the like Handled and been sensible they aren't a real issue There would be millions of plate rectifiers still operating around the world and well into the next 100 years I would imagine So to answer your question, yes of course you can replace it with block rectifier as you call it, find one with values a maybe 50 - 100% higher than you have as they aren't as forgiving to big back EMF surfes as a plate rectifier And you might need to (but unlikely to) put a capacitor across the D.C. to absorb any surges Remember I have no idea what other electrical stuff is on your truck, but guessing plenty of things with coils and these creat the EMF when been switched off But as far as I know you still haven't tested the rectifier so there is little point in changing yet Paul

No, rectifier is solid state I would think if you cooked it you would be able to tell The battery would of been boiling prettu hard for a while and Im guessing that was the smell Might pay to check water level in the battery if it was getting hot to touch it would of been bubbling pretty hard inside Paul

Welcome to the forum, apart from.a Flinstone Mack with a off set cab I can't you much But yeah a DM 600 Im pretty sure is what it is Paul

This a good point Geoff makes Try to find components as close to what you need But check the rectifier, it may have one crook diode that is allowing the voltage to creep up a bit Paul

This is important Angelo I think it won't of tested bad as the voltage is coming thru okay However Angelo you can test the rectifier easily even with just a test lamp Remember on the other side of the world so don't think I'm been rude if I dont answer as I'm asleep when your awake Paul

You need a test lamp, very basic old school type And a analog multi meter, nothing fancy, not digital If your not experienced a digital meter can lead you up the garden path very quickly This way when Geoff or someone else asks a question you can give a positive correct answer on exactly what you are looking at Also a couple of leads with alligator clips And if the budget can stretch a few more dollars, a set that plugs into your meter Now remember the golden rule, "always test the tester on a known supply" So test the test lamp on the battery, then test it on the ground your going to clip alligator clip to from the test lamp Once ground is established amd proven then test what ever it is with the probe Once found a reading that's a bit sus, recheck the tester encase the ground or tester has changed You don't need flash test gear and 99% of your faults will be found with a test lamp, thats all most workshops had back when this fire truck was built So keep it really simple Geoffs your man here, he is much much better with words than I am Paul

I have just the right hand side of this hanging on the office wall to explain to the apprentice about things like this Paul

I probably came across a bit harsh That wasn't my intention I'm trying to just get you to not just start changing things and fiddling and making it worse I have worked on a lot of plate rectifiers over the years, worked on a lot of generators and alternators, mainly on the electrical side of things It is how I got my start in the world as a young man, so I do have some idea what I'm talking about Goeff is very switched on, listen to what he is saying I tend to stay out of giving advice on electrical things like this as everyone else has plenty to say and people that don't understand things can get very confused Your ground (which by the way, is what I think is wrong) wont be a wired connection as such, at least I doubt it will be, it will most likely be the connection that the regulator or what ever is faulty is attached to So I was taught as a apprentice, and still use these princables Always prove the fault before changing anything Prove the bad connection before undoing things and cleaning Prove the faulty rectifier before tampering with it Prove the faulty alternator before sending it off to be reconditioned By doing things this way you teach yourself actually gind the fault If don't prove things your only guessing and potentially making the problem worse and waisting time and money Anyway, good luck and I'll stay out of this unless asked My only advise is to prove the fault before changing or adjusting anything Paul

Test the rectifier before changing it Simple to test If it was mine and it's not I would stop just guessing and start testing things To me there's a lot of guess work going on The alternator is working, we know this as it's over charging so leave it be The rectifier is working, your getting DC from AC so leave it The regulator isn't working It needs a reference to know what voltage to regulate at Do you have voltage at the regulator And yes replacing the alternator is the easiest way to solve this with a modern type But this should be easy to fix Paul

Does this have a socket to plug power in to keep it charged when parked in a fire station? I don't know about fire trucks but have been sent to repair power supplies etc at ambulance stations in Australia and they have a lead to plug the ambulance in This must be unplugged before the ambulance starts Am wondering if this rectifier is similar part of the charging to the ambulances I have worked on and nothing to do with normal charging off the fire trucks generator Not knowing my ass from my elbow about fire trucks I can't really advise I can only imagine they are built to be able to idle for hours on end and run on full power the same No matter now, all we for sure is it's charging but not regulating As far as polarizing goes, I'm pretty sure thats done make it either positive ground or negative ground Paul

https://www.facebook.com/reel/1348957282395349?mibextid=Vztt45

I must be more gung hoe than most The head would of been yanked of the motor weeks ago if it was mine Not to mind, to me it's pulling a bandaid off, you can stuff around but I reckon I'm best to see the bad or good news right away Yep, yank the head, roll the push rods on a sheet of glass Check the cam Work put whats what and put a plan together Paul

Over drive and or bigger tyres Paul

Done and dusted Come on you lot get behing the Bull dog breed, help these jokers have a win Good luck to both you all

Well there's some hairy chested Mack action here Some how I just can't imagine Volvo power been this awesome Paul

Sorry Joey, I haven't even seen this but rather got a phone call last night asking the question I asked here I can ask for more information and see whats forth comming I will update as I learn more Paul

Okay, I'll report back then, I wonder if I sent Barry a message if he can shed some light No good asking a Mack dealer in Australia, it would be like asking a Mack dealer in the States about a Australian truck Thanks for your help Paul