mrsmackpaul

This is the gear that is reported as the go to deglazer used car sales man instant rebuld kit in jar bombdiggitdoo kit This will save you bucket loads on those over charging money hungry pescky mechanics 🤣🤣 Paul

That would of added some excitement to the day Gotta ask the question, did you get under and have a look when you first noticed it tracking out wide ? Thinking it might of had a broken or missing bolt that could of easily been noticed And Mack Camel backs do track a fair bit Paul

I would be guessing you blokes are right about the rolled O ring That been said the motor was probably rebuilt by a normal bloke like most of us and didn't even realise I doubt commercial truck owner would of rebuilt this for commercial use So we shouldn't be to hard on who ever rebuilt it, I'm thinking it was done with the best of intentions I wonder if the motor sitting for so long got rust in a groove of the twisted O ring and the rust cut thru the O ring with heating and cooling If this had been im continual use I wonder if it would of happened at all ? Paul

Silverfrost paint was common to find on head gaskets in Australia maybe 30 years ago or more but havent seen anyone use it for a real long time now I have used copper spray, only if the head is in a really difficult spot like a COE truck without a tilt cab Paul

I was going to go to a truckshow, yes it shocks me as well, so put the truck on the trailer as it is easier for me to wash underneath it Well I washed away and it has rained and rained and rained some more This is all heavy self mulching clay here and adter 1/4 inch of rain you.can move so the truck sits I have done (hopefully) sone improvements to the sir start as it is fed direct off the wet tank and all the dirtest air goes straight from the wet tank thru the valves into the airstart air tank This causes anyoying leaks as crap gets under valves Anyway dont wanna corrupt Vlads thread here to much Oh and another 20 mm (3/4 inch) over night, thats helped no end Note I did shift Mrs Mack since the last photo The bull bar is off as I was gunna polish it up shinier than my head bald head on a hot day, and do some repairs to it as well Sorry Vlad Paul

Welcome and thankyou for your information Please feel free to share any knowledge on Macks from your part of the world Paul

refractive lense never heard of such things, as long as they work I guess and sounds like they do Paul

I would agree, you can see there's issues, dont want to make it worse Gaskets and the like are cheap Paul

Miss Molly the border collie is waiting for me to get my act together Paul

There's some good reasons to not force the engine to hard mentioned here My thoughts are fairly similar, if the truck is home and you are capable of mechanical work to me it's a no brainer, pull the heads and have a look Because without doing that you have no idea what's stuck, everyone here is assuming pistons, it really could be anything and the chance of causing a major issue is pretty high and could be easily prevented by pulling the heads and having a good look Not only that it gives you the chance to clean 50 years or more of crap off everything and not have it pumped thru the motor Anyway thats just thoughts Paul

No definitely not Drop the tail shaft, put in gear and use a porta on the yoke of the tail shaft to move the motor Pry bar is the go, lots of possom piss as Hayseed suggests Be careful with heat as you might crack the head or stuff the injector People sometimes screw a slide hammer into the top of the injector, but this normally just breaks a really stuck injector Paul

It's come up well Vlad I find most metric fittings and air lines etc work well enough with imperial, just use some thread sealant Yes projects have a habit of blowing out in the time department for me, was going to go to a truck show a few months ago and turned my Mack around and parked her on my low loader to give her a bath Well it hasnt stopped raing since so it is stuck high and dry Paul

Well done

Anyone that buys these old buckets of bolts is paying to much I have no idea about the price in the US but 5grand for a B model in Australia would be a steel Paul

Seed these are Trev Jones and the Princess took some as well so credit to both of them Paul

Well I'm gunna be keeping a eye out for some piccies Paul

Fill the filters and wind it over If it wont prime pull the lift pump apart it mighr be full of gunk It should prime up pretty quick with out anything special If you have the lift pump apart pack it with grease so it sucks right away Paul

Mate, how long is a bit of string ? Honestly you are the only person that can make that call Probably not much of a answer your chasing but the only one any of us can honestly give Paul

Check out this CH something and the hairy chested buldge in the bonnet (sorry hood) talk about tough looking this dog has some balls about it NrwZeaNewZealands 1000th Mack A E9 with a fare set of haggets The forst Anthem I have been up close and personal with And I have gottaadmit they look better in the flesh than the photos I see And what it is really about, great people Trev Jones that I have spoken to for years over the interweb We (the Princess and I) met Trev and Mary for the first time and went out for lunch after the show and sat amd talked and laughed and got on like a house on fire because like almost everyone of us all over the world we are just normal jokers having a crack at living the dream A couple of good looking roosters there Heaps more to tell about NewZealand but not Mack related as such If you ever get the chance jump on the kero kite and go for a look, it really is special Would be the best money l have ever spent Paul

The Midliner that causes only Americans to have coniptions when it comes to getting parts for The rest of the world I think is just used to been mucked about and really having to chase up spares

Well the big event has come and gone I haven't had holiday in I have no idea how long, maybe 15 years or more So a few months ago, about 6 months I was working away and trying to get some shut eye in a feral cabin in a dodgy as all get out caravan park and "stuff it Pauly, you should go" So jumped on Google and booked some airfares to NewZealand and back, with a fortnight gap between them Told the Princess when I got home and just by coincidence the trip coincided with 50 years of Mack celebrations So as the time got near I booked a campervan and waited nervously as huge parts of eastern Australia are in flood, millions of acres at a guess Knocked off work on the 14th of October and pointed the ute south for Melbourne town at around 6.30 We drove thru at a guess 4 km (3 miles) of water from just a few inches to 18 inches deep in spots arriving in Melbourne around 10 Caught the kero kite at 1/4 Twelve Landed in Christchurch at 5.30 am and collected our camper First thing I will say about NewZealand is that photos do not do it justice, it is absolutely stunning scenery that is constantly changing, I never tired of the views, it really is that good, the south island is very different than the north island I could share photos of all sorts of things but been a Mack truck forum I'll just share the photos of the truck show Depending on who I asked there was either 171 Macks or 205 but ot was huge and well done Now before anyone passes judgement on the show size you need to remember that there is only 6 million in the country thats about a 1/3 the size of Texas NewZealand like Australia shouldn't really make it in the world but just like Australia they punch well above their weight and should hold their heads high, what Yanks probably dont know or understand is the ANZAC spirit that shaped our nations Anyway some piccies The first NewZealand Mack rebuilt and looking damn sexy And a better photo, courteous of Trev Jones Trev is fella I have been speaking to for many years over the interweb Trevs hobbie is photography and needles to say thats how we started communicating over Trevs photos And in particular his selfsteer trailer photos So Mack number 1 is a FR with a fiberglass cab, You can thank Peter Ramsey for the use of the scans from the Bulldog Bulletin Anyway on with the show Now there's a good looking rooster all done up in his town hat in front of a truck a mural of a couple of my child hood hero's, Wal Footrot and the "Dog"

Well yes and yes Yes you should have no air coming coming out at all when the trailer supply valve isnt pushed Amd yes the tractor protection valve isnt working Or at least thats what I undersunderstand is happening Paul

Market place on Facebook works in pretty good in Australia