sodly

And SOMEBODY styled it. It would be interesting to know if that person's still around. Would love to see the design process it went through. Surely there are renderings or photographs of prototypes somewhere. Seems we'll never know.

The Brockway thing was discussed way back at the beginning of this thread.

Thanks guys, especially AZb755v8. This is helpful stuff. Yikes! So you say about $7k-ish for new wheels and rubber? And an equal amount for frame blasting/painting? This definitely isn't a poor man's hobby, is it? It amazes me when I go to truck shows and see how many guys have "toy" trucks that don't do anything but go to shows. Many have more than one! And then to haul or drive those trucks long distances to shows! Yowza, that some serious coin! More power to ya! Hope to join the fun some day. I realize it helps a lot if you're already involved in trucking somehow and have access to the equipment to be able to mess around with big toys. Unfortunately, I don't have that "excuse" to have an old truck. If anyone else has additional feedback on their experience with buying or refurbishing their hobby truck I'd love to hear about it. I'm sure some of you have been in my shoes before.

I've been a fan of the old truck hobby for decades but generally only as a spectator. I've always hoped to one day get in on the action so I'm now hunting for a hobby truck of my own, preferably a Superliner. Over the years I've collected a few antique pickups but never personally owned a "big" truck of my own. I'm not in the trucking business like many of you but I have driven big trucks off and on over the years and have a life-long passion for them (esp. Superliners!). As I look at trucks for sale I find that most of the ones in my price range need some "sprucing up." I'm trying to get a handle on what it might cost to have some of this refurbishing work done since I don't really have a clue. I'm sure many of you have tackled these kinds of projects before. Can anyone give me ballpark costs for some of the tasks below? I'd just like to have a general idea of how much $$ I need to allow for these things as I plan my "toy budget." * Professionally polish all the aluminum on a tractor-- 6 (or should you just do all 10) wheels, 2 large fuel tanks, battery boxes and air tanks. Do polishers do stacks, grilles and mirrors, too, even though they're not necessarily aluminum? * Sandblast and re-paint a frame. I know that's a loaded one. I'm talking about doing a pretty thorough job-- removing all the wheels, fuel tanks, air tanks, battery boxes (or somehow covering them). Then covering the cab and engine so the entire length of the rails could be primed/painted uniformly from end to end. I don't know how else you could paint a frame without it looking half-assed (like just doing from the back of the cab to the end of the frame). Of course, the frame behind the cab would have to be done inside and out, including the rear axles and suspension. A big project! * Install new air lines and other rubber/plastic that might be degraded from time. * New tires-- what kind of money does it take these days to put a nice, new set of 10 matched American-branded tall tires (say 11Rx24.5s) on a tractor? Include mounting, please. Thanks, guys!

Interesting. I was thinking the E6-350 didn't come in Maxidyne flavor but wasn't sure. Yes, this emblem had studs through the hood. Wonder if someone just changed out the Econodyne emblem for a Maxidyne one. The whole thing just didn't seem right to me for some reason. So can anyone tell if this engine is an Econodyne version or not? Refresh my memory.... Econodyne had a lower RPM range than the standard engines?

I looked at an RW2 the other day with an E6-350 engine and a Maxitorque 9 speed. This was a supposedly-unmolested, original 300k mile truck. On the drivers side of the hood it had a Maxidyne emblem. The passenger side was not drilled for an additional emblem. I didn't think Mack put 9 speeds behind Maxidyne engines. True? See engine tag photo. Something didn't seem quite right to me. Perhaps the hood has been changed? By the way, did they put the Maxidyne and Econodyne emblems on both sides of the RW2 hood.... or only the drivers side? Thanks!

Aaaah... the light is coming on now! Thanks, j. hancock!

I'm talking about the 4th and 5th digit in these codes. For instance, what's the difference between a 32 and 33? Or a 52 and a 53? And what's a 43? These are all different model engines, correct?

Can anyone tell me what engines each of these RW model numbers designate? I realize some of these were very low production variations. RW612 RW632 RW633 RW643 RW652 RW653 RW712 RW732 RW733 RW743 RW752 RW753

Does anyone have a photo of the shaft drive/bogie assembly in one of these early tandems?

Are loose R model doors very easily rebuilt or tightened up? I've seen some trucks that the door just shakes in its frame as you drive down the road. I didn't know how hard it was to remove this slop in the hinges and/or related assemblies. That is one thing I like about old Pete's with their piano hinged doors... they do seem to be less prone to slop. Any thoughts? Thanks!

Really cool! I'd love to see more, too!

So what's the story behind Joseph Equipment? He always has cool stuff for sale with no prices. Then when you call or email asking for more info and photos you get no response (even when he says he will send the stuff). I'm stumped. If he is a collector, does anyone have photos of his collection? Would love to see his "keepers" if this is the stuff he's letting go of.

I received my copy of MACK in the early 80s when I wrote to Mack Trucks as a kid asking for brochures for my collection. Much to my surprise, the president of the company, Jack Curcio, replied with a care package of both Montville books, a bulldog ash tray, hat pins, truck lithographs, brochures and I can't remember what else. Still have all that stuff. I would love to see an updated version of MACK with more info on the 80s and 90s models.

I've always been curious about the Luberfiner thing, too. Seems I only see them with a Cummins. Were they ever offered with other engines? If not, why not?

I must be blind. I sure don't see that in my profile.

How does one shut off the daily digest emails from BMT? I can't seem to find the OFF button. I want to be notified of activity of posts I've made but don't need a daily digest of activity. Thanks.

Anyone have MPGs of E9s bobtailing or pulling empty trailers? How about E6s? Kinda makes me wonder if Timmyb is right. Perhaps lightly loaded (or empty) there wouldn't be much difference at all.

Sorry... what is "bugger all"? Ignorant American speaking here.

I'm wondering if anyone knows which engine would be best for MPG in a hobby truck that will be lightly loaded 99% of the time (maybe hauling a couple of antique pickups on a drop deck trailer or a fifth wheel RV or similar). Not looking to haul 80,000 lbs on a regular basis, if ever. Logically, I would think an E6 would return the best fuel economy pulling light loads but you often hear people say that large-displacement, lightly-stressed engines actually outperform the small-displacement engines for economy-- although I'm assuming that's pulling full-gross loads. Does anyone have any experience with these motors pulling lighter loads like a hobby truck typically would? I've always thought an E6 would make a lot of sense in a hobby truck but I want to make sure I'm not missing something. Thanks for your input!

So they came in an offset cab version, too? I've only seen the regular cab on an RB.

Yes, I remember this truck from a magazine cover. I have the photo somewhere. I think it may have been American Trucker rather than Overdrive, though. Where is this located? That almost looks like a KT Cummins to my untrained eye.

I never thought of the RB as a very popular model which is why it seems an odd choice for a last R model. In fact, I don't really recall seeing any RBs until they quit building R models. Then I started seeing some around. Did their production run overlap with the regular R models much? Or were they a late addition to the R lineup?

If memory serves, the RB was the longest-lived R model. I'm not sure what year production ended but it was several after the regular R model ended. I've always wondered why this was. Is it simply because it was a set-back front axle model and Mack didn't have another one in the line up at that time? Or what was it about the RB that convinced Mack to keep it around so long? I rarely see them here in the Midwest. Was the RB a heavier-framed version of the R like an RD? Or was it light-framed like a normal R? Inquiring minds want to know?

Saw this pic on Ebay and it didn't look like any Mack model that I'm familiar with. Can anyone tell me what this is? Looked sorta BX-ish but the hood seems too long. Smart looking truck.