Jump to content

ranchhopper

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,314

  • Joined

  • Last visited

  • Days Won

    10

 Content Type 

Everything posted by ranchhopper

  1. ranchhopper
    That's a truck junk yard they have a few yards I have bought things from them before.
  2. ranchhopper
    Drove an RD for a couple years with a 13 speed maxi torque trans that would be my choice of trans if I could find one at a reasonable price for the superliner.
  3. ranchhopper
    I didn't use the welder because of the slag falling down on the crank.
  4. ranchhopper
    Have fun pulling those liners couldn't get mine out even with the proper tool had to take a torch and heat mine up in a line from bottom to top in three places even then the tool struggled to get them out. Installation was much easier I left them in their boxes and put them all in the freezer for a day they dropped right in like they original equipment.
  5. ranchhopper
    I like the old flat fender jeep I took an old 49 CJ3A and restored it and turned it into this I call it a M38 clone when I disassembled it turns out someone used an old rare surrey jeep tub on it.
  6. ranchhopper
    I need a dynatard solenoid for my superliner the wire is broke off one of the solenoids looking to buy a new or used one no preference.
  7. ranchhopper
    That's a mack with the fuel filters on a slant the IP is on the opposite side than on a multifuel too.
  8. ranchhopper
    I just put a set of PAI liners in an E6 we use them all the time at work in our fleet.
  9. ranchhopper
    Got to get er done for the coming work week the joys of being an owner operator.
  10. ranchhopper
    I hear that done it myself.
  11. ranchhopper
    I see some still on hoods manders is selling Im going to call them and see if they would sell me a set of used ones.
  12. ranchhopper
    I have an extra one I could sell last summer I couldn't find one anywhere and storkmack was good enough to sell me one but now the superliner has the newer rounded front style on it and the cab I bought had the pointier style on it which is the one Im going to keep.
  13. ranchhopper
    I bought my PAI rebuild kit from the local fleetpride for 1300 dollars out the door they give me the discount the company I work for gets I put it under their account and pay cash for it makes a big difference in price when they spend half million a year for parts and pay their bill every ten days they get great rates
  14. ranchhopper
    Bet that made quite a bit of noise while it was running.
  15. ranchhopper
    Why cant you drive it home I used to buy deuces and five tons from the missouri national guard in jefferson city missouri and from the the wisconsin national guard in sparta wisconsin and drove them home all the time with the warm weather of late makes it a perfect time. It can get a little tough at times when a break down occurs but bring a big set of tools, fuel filters, nylon air line, lots of brass air line fittings and some spare batteries and go get it.
  16. ranchhopper
    Mike those look like the set I have on the RD at work Im trying to keep the older look by using the valueliner type of light heres pics of what I have on there now.
  17. ranchhopper
    Thanks I would appreciate that.
  18. ranchhopper
    Actually I only need one the chrome is bad on the passenger side light Im going to have to keep an eye out for them.
  19. ranchhopper
    Im looking for a set of the older style front turn signals from a superliner or valueliner mine are good for parts but the chrome is bad on them I want a nice set to go on the truck after its been painted.
  20. ranchhopper
    I have the big and small one from my parts truck kinda rusty but useable.
  21. ranchhopper
    Mike Im looking for a complete camelback set up axles and all spent a lot of money on Christmas wont be buying until spring.
  22. ranchhopper
    If it stays as cheap as it is right now it would still be a good buy considering you could probably sell the fertilizer set up on the back for the cost of the shipping.
  23. ranchhopper
    There is a pretty nice steel dash RS700L in texas 1970 I believe I was going to try to buy it but the wife says I have enough toys the truck is on the purple wave auction site just type in mack it and 13 others will come up.
  24. ranchhopper
    Yes they call that bubble or flow timed I have a friend who owns a diesel shop he said he would do it for me he does it for a living he will do a much better job than I will. I got the pump back in everything primed and it started right up good oil pressure sounds good so alls well now my first mack rebuild is a success.
  25. ranchhopper
    Im going to take it in and have it flow timed.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...