Jump to content

Coenut

Bulldog
 View Profile  See their activity

  • Posts

    291

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by Coenut

  1. Coenut
    New door. No box. No holes are drilled for lock cylinder or mirrors. Their is a small ding that a hammer and dolly can take care of. Looking for 300 of best offer. I don't know how to correct sideways pictures.
  2. Coenut
    Usually these guys are great with parts. They take the time to look and research parts and part numbers so this was just odd. They could have been super busy. I'm not worried.
  3. Coenut
    4mr334-p21
  4. Coenut
    I have a part number on my sticker that I wanted to replace. I was told it wasn't a Mack number. No dice.
  5. Coenut
    I want to make sure I have this correct. Does the shifter boot in an r model mount on top of the floor pan? Or does it secure to the underside of the pan? Does it get secured to the pan then the carpet and finally the ring using different fasteners? So that the boot remains in place if you need to remove the ring and carpet. It probably gets sandwiched to the pan by the ring carpet, but want to be sure. Nobody wants water or a draft.
  6. Coenut
    Thank you. Do you remember what the promotion was?
  7. Coenut
    My dispatcher picked these up at a yard sale. Was this a promotional item?
  8. Coenut

    Roof harness

    Coenut posted a topic in Parts Wanted

    I'm looking for a roof harness for an early 80s r model with the radio in the dash. Doesn't have to be new just not all cut up.
  9. Coenut
    I'm looking for a tan plastic headliner for an r model. My headliner is loaded with cracks and chunks missing.
  10. Coenut
    Does anyone know or have the contact info for the fellow at Macungie that has the r model headliners for sale? It's not the person who sets up on the corner with the trailer but a guy in one of the grass rows.
  11. Coenut
    What's left of an r model hood. I bought it to paint front,wire new lights and hang on my shop wall. Rest of hood is not in bad shape. Some cracks and repairs but no chunks missing.
  12. Coenut
    I'm looking for help. I have marked every air hose during disassembly of truck. Also kept every hose. Except this hose. It's the front lower port on an e6 valve. I don't know where or what it routes to.
  13. Coenut
    Did chad sell you this truck?
  14. Coenut
    There's just enough drop outside the door for the tips to clear.
  15. Coenut
    The stack is 5x72
  16. Coenut
  17. Coenut
    I think there are just 2 pans both are available. Not cheap. Get to fabbing.
  18. Coenut
    I will bolt the brackets up tomorrow and post some pictures. Thank you for all your help.
  19. Coenut
    The hood is the same as the second photo. The hood guides are not the issue its the brackets that they bolt to that are way off. I cannot figure out what is wrong. The brackets that came on the donor cab where tight to the cowl. can't find those.
  20. Coenut
    I am currently doing some reassembly on an 1980 r700. The cab was toast so I bought a donor cab 1985. Gutted it and put it back to a tan interior 79. Cab doesn't appear to be tweeked. The hood latch support brackets are not even close to fitting correctly. They are off the r7 cab. The passenger side bracket is too long and the holes for the hood latch do not come close. The driver side is close but way to low. Brackets are not bent or tweeked everything is straight. Any ideas.
  21. Coenut
    Bought the dash pieces for my r. The original had tabs welded to the structure. The tabs are fastened under the dash support cross bar. The new panel has these 2 holes. Are there more parts to make this work? The bar has no other holes in that area. Also does anyone know the part number for the hollow bolt like wiper washer fluid nozzles that mount on the cowl.
  22. Coenut
    I have a rear window out of an r model. Some small scratches, not bad though. Free
  23. Coenut
  24. Coenut
    What are the diameters of the tan wheels? Any pics?
  25. Coenut
    I bought one from watts.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...