mackdaddy1911a1

That is a good deal...glad to hear it.

Ya'll be careful on those crotch rockets. Nice fire stick you have there..you must have a daugher too. Mine is a U.S.M.C. mossburg model 590..9 shot capasity with bayonet and heat shield along with synthetic stocks and apeture sights.

Otherdog I had the same thing happen to me when I got a friend to help me install a toolbox on my brother's Ford Ranger. While my brother was on leave (U.S. NAVY, ONBOARD U.S.S. ENTERPRISE) and was down in Jacksonville, Fl. visiting some friends he was rear ended and the bed was totaled. He was o.k. but the truck was in a bad way. I told him to bring it to me and I would get it squared away. Well after the insurace money ran out I put an extra grand with it and after they finished it brought it home. I asked our local Village Idiot to help(bad move on my part) put the tool box on. Well we set the box on the bed and before I could stop the guy he opens the lid and scratches that very expensive paint job on the back of the cab. So I hauled off and kicked the guy in the shin with my very heavy steel toed boots. Good luck with the hood, now go kick the hell out of the jerk.

Otherdog, don't you drive a peteoftrash???? That was a good joke but I bet Rob is gonna shoot your pinky toe off. We all know that you have the hots for his daughter. Driving such a fancy truck gave it away..lol Then again maybe not..are you and Rob some kind of kin??

If the rail is "HEAT TREATED" you could weakin it . ON my truck there are big signs on the rails ..."DO NOT HEAT,WELD,CUT, OR NOTCH FRAME FLANGE". I would rather have a few hours of hard work than destroy a good rail. Ducky becareful and if you get aggravated with it take a break and come back to it. Robs idea sounds good as well as the others .

Nice ride guy. Don't worry about the pictures they are fine, it's just like learning to drive a new truck. It takes a while to get the hang of it but it all comes out in the wash. If you have kids ..they usually know more about computers and printers than the people who made them. Good luck uploading all your pictures .

Welcome on board. Well You have made your first great buisness investment. Buying a new MACK truck was the smartest thing you could have done with your money. You simply cann't wear them out unless you realy abuse it for decades. I hope your dad told you he was proud of you for that decision. Good luck and keep the dirty side down.

Rob did that evr happen to you. What did you tell he...him after he said that lol By the way I've never seen anything like that post a pic maybe we will learn something new.

Nice Bulldog guy, I'm here to tell ya if I had sat that long in the mud I can assure you this I couldn't have made a trip like that. That was a great story, welcome aboard and please post more pics when you can.

I also have an 01 Vision CX-613 with the 427 E-TECH. My truck's engine is the Econodyne engine which only runs out at 1750 RPMs but I have had very good luck with it. I pull flatbed with it . About 2 months ago I got a ticket for being overweight I was 83250 gross. I was actualy thrilled by the ticket. For what ever reason my truck won't pull with a lite load for instance running back empty yesterday from conneticut the truck wouldn't hold 65 going across N.Y and PA. on I-84 then I-81. When I got the ticket I was going up to Jersey City N.J. and only had to drop one gear the whole way. The engine justs pulls better when fully loaded. I have heard alot of bad stuff about the 460's but don't know how much is true. At 65 mph I get between 6.5 and 7.25 pulling loads that range from 20,000 to 48,000 Lbs. I hope ypr Bulldog does as good a job as mine has for me, My only suggestion would be to keep the OVERHEAD run often. OTHERWISE get ready to install a new cam. Good luck

U LIKE THE LINES OF A CH HOOD BETTER BUT THE VISION HAS A HECK OF A LOT BETTER SIGHT LINES. GOOD LUCK IF YOU DECIDE TO DO IT.

McOz what the hell happened and when? Some how or other I missed out on all the excitment. Did you beat hell out of the moron who hit your truck? If not I offer my services for free. Man that has got to suck and the idiot didn't have insurance.. good luck getting her back into running trim.

nope but since volvo is literaly de-nutting MACK they wont have much compitition ....DOOM ON YOU VOLVO MATT

Welcome and hello from North Georgia, NOW FOR THE WARNING hold on real tight and I would suggest hip waders around here. Matt

I prefer a magazine fed weapon allows for a moment to cool down a bit, on belt fed weapons you have to change barrels and such.My favorite is the M-14. Same round as the venerable M-60 and very accurate. I'll let you borrow it if your daughter drags any scum home. Matt

Man you sure have done an outstanding job on the ole dog. Looks very very good. Good luck and God bless. Cann't wait to see the superliner. MATT

Merlin5577 welcome aboard. I think everyone here can learn something new from someone else on this forum. matt

Mike you do know that daddy's of daughters have DOUBLE BARRELED SHOTGUNS don't you?

Now WHY did you have to go and do that .......Cursin on this here forum.... v#**# is like GD round these here parts. BULLDOG MAN just keep the faith and hang tough we're all pullin for you and your family.

Now WHY did you have to go and do that .......Cursin on this here forum.... v#**# is like GD round these here parts. BULLDOG MAN just keep the faith and hang tough we're all pullin for you and your family.

Thank GOD she wasn't hurt and you guys had some father daughter time together. I lost my dad back in 2000 a sure do miss helping him out in the shop working on his old tractors and his Ford model T pickup. Those are some of my best memories. She will say the same about you Rob if she isn't already.... my guess is that she already is. MATT