edp1959
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by edp1959
-
-
Thanks, I'll look at that.
-
Does anyone have a fuse panel layout for a 1993 MS200?
-
I'll give this a try when I get home. Thanks for the reply.
-
I have a 1993 Mack MS200. When I turn the switch it won't turn over. Last summer it started fine but the batteries went bad and the ignition key broke. I got busy with other things around house and was not able to get those things replaced until now. I have installed new batteries and had a new key made. I had to take the ignition switch out to have a locksmith make a key. He had to take the switch apart. I have that installed and when I turn the switch all the panel lights work like they are supposed to but the starter makes no attempt to turn. Also when I turn the switch on I hear something beeping behind the dash panel. Keep in mind this is my first truck like this so I'm a little unfamiliar. Could this be a low air alarm and would this keep it from starting. Any suggestions as to where to start or what might be causing my problem?
Help...won't Start
in Electrical, Electronics and Lighting
Posted
Last night on my MS200 I turned the switch and all the panel lights came on as normal. When I turned the switch further to start it the starter turned a little and then everything went off. No lights...nothing. It sounds like a fuse to me. I checked all the fuses in the fuse panel and none were blown. Is there a main fuse somewhere else I'm missing. What are your thoughts?