Jump to content

Moparmike

Bulldog
 View Profile  See their activity

  • Posts

    274

  • Joined

  • Last visited

 Content Type 

Everything posted by Moparmike

  1. Moparmike
    Looking a good good mines cracked and busted from previous owners dropping it
  2. Moparmike
    I've changed them on the truck good lubes and spoons quick work..
  3. Moparmike
  4. Moparmike
    My 2001 and 2000 they both need a polish job now but the 2000 looks pretty good when they cleaned up .. White truck 2000 looks good with gangster look painted black lol
  5. Moparmike
    Well I ordered new compressor new dryer nee expansion valve took evaporator core out had it pressure checked and clean no holes .. Reinstall everything including orings ac goes down to 34 degrees now .. Plan to do the same with my other 2 rds
  6. Moparmike
    Driver said light came on then they stopped never went above 200 driver said but we know how that goes..it doesn't get hot now but light comes on and if you don't add water truck shuts down by computer. Running 71000 bout 8 10 hr day use bout half gallon 2 to 3 days .you can see where it pushes out on the frame tanks have more then normal water
  7. Moparmike
    No it doesn't pull back in the top tank .it just push it out the small hole in the bottom tank cap and that's it ..I replaced the cap on both tanks at the same time I did thramastat but I could have got a bad cap.
  8. Moparmike
    Mo sure but it's more then I have normally seen .
  9. Moparmike
    Getting water in air tank is this the compressor head gasket going out
  10. Moparmike
    Replace the stat cause it went bad now the truck push water out the little hole in the holding tank. What would cause this truck doesn't run hot just lighting volt come on bout 3 days add water bout 3 days later light on depending on how hard the truck is worked. Quad axle dump truck
  11. Moparmike
    Which do you guys think is better red dot back wall mount or replacement stock system..gotta get this thing going
  12. Moparmike
    2000 rd688 driver side air bag has a pin hole in it so I need to replace it..I took the air line off got the bottom out but cant get the top to come out does it bolt in or something..my freightliner bag looks the same and just pop in a hole Thanks for any help
  13. Moparmike
    Where do l start I haven't checked the fuse cause the lights use to just flicker if you turn the dimmer or they would stay bright but now no cruise as well Any help is appreciated
  14. Moparmike
    2001 rd e7
  15. Moparmike
    Where do l start I haven't checked the fuse cause the lights use to just flicker if you turn the dimmer or they would stay bright but now no cruise as well Any help is appreciated
  16. Moparmike
    Ok guys update truck has been fixed Turns out the pin in the spring pak on driver side was broken and the u joints on the top of gear box and inside can was worn out no splines left inside them Replace and truck is back working like a dog lol Thanks guys
  17. Moparmike
    Yes turning on the shaft about half inch I didn't know that the yoke that goes on the shaft had splines so maybe the splines are worn I going to try and remove the yoke from the top of the shaft and see what things look like But I know if I have the truck up on the jack with no pressure on the steering it turns free no binding or locking Mack dealer said could come from pot holes on the job binding the u joint set up beyond its travel and wild driver trying to fly on job site which I know they do I've gotten on them before for the same reason I'll try to get a picture of the problem thanks
  18. Moparmike
    No it hasn't been off I'm thinking that the rough job has beat it up and caused it to slip more then it should move on the gear box shaft..cause driving it some times it doesn't even get to that point where it has that little bite of lock
  19. Moparmike
    I'm thinking that my u joint at the box is bad because I have a spot now that locks them let's go and makes a loud pop.if I look at the box and joint with someone moving the wheel back and 4the joint slips around the top of the shaft about a half inch ..anybody have this problem before. Been on a rough haul dump truck in sand pot holes wild driver with lead foot.im hoping it's not the box Oh 2000 rd690 E7 auto Thanks for the help
  20. Moparmike
    How much for 10 and location
  21. Moparmike
    As far as the rims nobody has them used only found 2 company's that can get them but that's alot of cash 2600 for 8 wheels then 3000 for tires kinda tough on the pocket lol
  22. Moparmike
    Cost double the price of 11/22.5 and here in nc dot says tire cant touch when loaded they just do touch I've had no problem with them but problems with dot..
  23. Moparmike
    Quick crazy question guys will a 11/22.5 tire fit and run fine on a 9 inch rim that my 315 tire was on.. Looked at changing hub drum to 10 bolt 3600 then have to buy tires and rims not a option Called about new 8 lug rims 2600 then tires dont really want to spend that much either smh Any advice would be appreciated thanks
  24. Moparmike
    Anybody else truck have this odd wheel on it 315/22.5 8 lug rims on the back and drop axle of my dump truck..needing to change to a 11/22.5 or 24.5 regular size tire ..priced 8 rims yesterday 2600.00 thinking of changing hubs and drum
  25. Moparmike
    Thank you

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...