Jump to content

rick harper

Bulldog
 View Profile  See their activity

  • Posts

    399

  • Joined

  • Last visited

 Content Type 

Everything posted by rick harper

  1. rick harper
    The new LR cab will make it debut at the 2015 Waste Expo this year.
  2. rick harper
    Just read your from Canada. I know the credit is for USA dealers maybe for Canada too.
  3. rick harper
    You can go to the factory and pick it up yourself. The factory will credit the dealer 500.00 for customer pickup. Request the 500.00 to be allocated to you so it will offset some cost.
  4. rick harper
    I agree with Glen. Have pump calibrated.
  5. rick harper
    run it.
  6. rick harper
    They are expensive. Mack does have stock. Ill sell you an 85115412 for 940.00 bus the freight. If you want it call me at 918.697.8473.
  7. rick harper
    The hand control valve is suppose to be spring loaded and not used for parking. If it is tractor/trailer it is used to apply air to trailer brakes. If you have a straight truck it operates the service brakes on the drive axles. I had a customer pull his valve down and went inside our shop. When the drive came out the tractor/trailer was down below the hill, crashed into the fence and stopped in the lumber yard. The driver was quite embarrassed.
  8. rick harper
    you don't have to change shift knobs. Just nibble off the lock tab that locks it in so you can split the low side too.
  9. rick harper
    Silly to pay that kind of money. No different than any other 2004 RD model. At the end of the day its still 11 years old. I can take an RD and make it look like a legend series for a lot less money.
  10. rick harper
    37QC213A is the part number. Factory has stock. Any Mack dealer can sell you it.
  11. rick harper
    Its to old for the factory to make one. If my memory serves me Mack will only go back 10 years.
  12. rick harper
    so many deviations in a 88 R690ST that the book you find wont help you.
  13. rick harper
    I put a Delco 39mt on mine
  14. rick harper
    ppg 08282
  15. rick harper
    If it shells,good luck with parts and pricing.
  16. rick harper
    Mack has gone to 10w30 factory fill on all new trucks. We still use 15w40 but thinking of changing due to possible fuel gains. New oils will be out for the EPA17 engines. Its becoming a headache keeping track of all these changes.
  17. rick harper
    Does the tractor have Bridgestone M726 Tires?? We have had some here that did the same thing and Mack replaced tires.
  18. rick harper
    SOLD
  19. rick harper
    2013 Mack CHU613, 505HP, 18sp.Mack Transmission, 14.6/44 axles on 46,000 Air Ride, Steerable 3rd axle. Mileage (1)60,000 the 2nd at 95,000. $115,000.00 each. Contact Kenny Smith @ 1.918.606.1959 Rick Harper @ 1.918.697.8473
  20. rick harper
    We here in Tulsa will celebrate 55 years next month in February. Same family for all those years. Only Mack Trucks here. Mack Truck Sales of Tulsa, Inc.
  21. rick harper
    Recent repairs. Reman engine 4.20.08, 1,111,000 rod/main bearings and oil pump 3.14.13 1,728,000. king pins- 4.4.13, 1,736,000 clutch, rear main seal and turned flywheel-4.1.14, 1,823,000
  22. rick harper
    APPROX 35 TO 45 HOURS WORTH OF WORK THERE. TIMES YOUR LABOR RATE.
  23. rick harper
    505C+, Mdrive, 12/40 Mack axles 3.56 ratio, Twin Y air ride, 70" midrise sleeper. Rawhide edition.
  24. rick harper
    Forgot to state the miles. 1.9 million.
  25. rick harper
    2001 Mack CX613. I sold this new in 2000. 1 owner and he drove it. 460,13sp, 12/40 air ride. 10 aluminum wheels. 80" high rise sleeper, one bunk. Rubber is in good condition. FOB Tulsa, Oklahoma. $13,000.00

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...