Jump to content

Bigdogtrucker

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,834

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by Bigdogtrucker

  1. Bigdogtrucker
    The newer dashes are identical except hard plastic instead of covered foam. Much better, just look for a used one.
  2. Bigdogtrucker
    What did the top speed out on the road end up being?
  3. Bigdogtrucker
    looked around on the front of the axle couldn't find it could it be in the back possibly?
  4. Bigdogtrucker
    Might as well run the speed calculator for 2100 RPMs, and it's a good thing you have that box at least it's the fastest one. And that tall rubber is great, until you have to buy some anyways LOL.
  5. Bigdogtrucker
    I'd bet slower, depends which transmission and tire size I'm curious to find out.
  6. Bigdogtrucker
    Wonder what the top speed is?
  7. Bigdogtrucker
    Yeah I was thinking the 512 I know it wasn't a 522. Do you know where the stamping is on these?
  8. Bigdogtrucker
    1968 R611T, has a Rockwell R170 rear from the factory and 10:00X22 rubber. Was wondering what front axle is would be, and would it be the same as used in a B as it looks a bit narrow?
  9. Bigdogtrucker
    Actually the Advanced Formula and professional line hold up quite well if kept up with a quality wax a few times a year. I'm going to use some Spray Max 2K clear on the parts mostly exposed to the sun though.
  10. Bigdogtrucker
    Started cleaning up the frame, did a test section of Rust-Oleum Regal Red. Stripped to bare metal, treated with phosphoric acid, then Rust-Oleum primer. Very happy with the results so far, going to continue and finish the whole chassis in this color.
  11. Bigdogtrucker
    Also do these boxes take grease or oil?
  12. Bigdogtrucker
    Thanks, there's not much play maybe a little over an inch? I'll give that a shot.
  13. Bigdogtrucker
    Manual steering box in my 1968 R600 has a bit of play, can these be adjusted?
  14. Bigdogtrucker
    Is it possible to know what horsepower an engine was by the numbers off this pump?
  15. Bigdogtrucker
    Thanks!
  16. Bigdogtrucker
    What would the total engine oil capacity be on this 1968 Turbo 673? Also a part number for the filter? Thanks
  17. Bigdogtrucker
    Pulled out the seats and floor covering, will need some rust repair on the driver side but really not bad overall.
  18. Bigdogtrucker
    Saw this posted in my Facebook group Steel Dash Mack's, looks real nice!
  19. Bigdogtrucker
    It doesn't have a gauge but I would guess it is. I mean you can hear it it's just not overly loud, rev's real quick it's a snappy engine.
  20. Bigdogtrucker
    My "68 673 T runs great, has a reman Schwitzer on it. Turbo whistle is not very loud at all compared to others with this style Turbo. Thoughts?
  21. Bigdogtrucker
    Pennsylvaniafor the last year before that it was garaged in Maryland for 30 years.
  22. Bigdogtrucker
    Took about a year, but she's finally in my driveway! Runs excellent won't need much mechanical work, but the cab will need some rust repair but not too bad overall compared to many.
  23. Bigdogtrucker
    It's a New Old Stock I bought a while ago.
  24. Bigdogtrucker
    The Maxidyne trucks I've have had a chrome base with a gold dog, anybody know if these gold bases where common or not?
  25. Bigdogtrucker
    No, this isn't the only one. I don't believe they're very common but there was a"T673".

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...