Jump to content

Bigdogtrucker

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,834

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by Bigdogtrucker

  1. Bigdogtrucker
    Looked up from the bottom and found this!Pressure plate seems to be off center.Bad plate,throw out bearing,both?
  2. Bigdogtrucker
    Thanks,maybe i can find someone local(CT/MA)to have a look at it.If i do end up needing a clutch what are the options?
  3. Bigdogtrucker
    Any way to check it out without pulling the trans?
  4. Bigdogtrucker
    Fronts are nice and tight,rears look good as far as i can see.Wondering if it could be in the clutch?When i push the clutch IN it's a little noisy,no noise when it's out.(quad with double disc)Clutch works good,but was last replaced in the "80's.The truck never saw a lot of miles though,hauled equipment to and from the job sites.
  5. Bigdogtrucker
    What would be a good way to remove the paint from my aluminum fuel tanks?Not looking forward to doing it.....
  6. Bigdogtrucker
    1.I've owned many B's with these engines in the past. 2.I never rev a cold engine 3.NO The balancer is on straight and looks to run true.What's on the inside of the balancer?
  7. Bigdogtrucker
    My 673 has a vibration i'd like to fix.When you rev the engine it get's worse,idle's fine.Does not matter if the clutch is pushed in or not.Water pump is new,fan is straight also.Any other idea's what to look at???
  8. Bigdogtrucker
    Why do these sell for nearly $2K when you could restore them for a fraction of that???
  9. Bigdogtrucker
    Few more pics...Glass lenses cleaned up nice,much better than the crunchy plastic that was on there!Also had some magnets made to cover up the rattle can paint on the doors.(decals took off paint when removed)
  10. Bigdogtrucker
    Just found this in the mailbox.Owners manual,order/build sheets ect.. and a FULL service manual!!!
  11. Bigdogtrucker
    Why didn't you keep it a T/A?Just curious...
  12. Bigdogtrucker
    Picked up a passenger seat bottom(needs covering),5 original glass marker lenses,a pair of front glass parking lenses with trim rings and a glove box with a metal pocket.All for $10!!!Super nice old guy,i've bought parts from him in the past.So far this project is comming together great .
  13. Bigdogtrucker
    Looks like a nice clean driver/work truck.
  14. Bigdogtrucker
    I pulled the cover and poked around a bit...After that the guage was moving in the charge direction when the RPM's are up.Also noticed my generator belts are a bit loose,and squeal some when reved.How should the points in these regulators be adjusted?Here's a pic of the inside.
  15. Bigdogtrucker
    The guy had it redone a few years ago(driver quality),had rust repair and it's showing again...It was for sale a few months back for $16,500!I don't think he had much interest so he's still running it.I guess he needs a bigger truck,but i'd keep that one for sure.
  16. Bigdogtrucker
    My B-75 was charging last fall,but after sitting over the winter it's not at this time.It's been converted to negative dround,and the generator was rebuilt a cpl. years ago.What should i look at first to find the problem?
  17. Bigdogtrucker
    Local guy runs this factory six wheeler DM,has a 237 with a 5 speed direct.I believe it's a "79,love the look of it!
  18. Bigdogtrucker
    I just remembered i have one from a B61,too bad it won't work!
  19. Bigdogtrucker
    I know,someday!The fuel tanks need to be stripped also,just getting a fresh coat of flat black for this year though...
  20. Bigdogtrucker
    Good eye!One more thing i need to get...
  21. Bigdogtrucker
    Did a quickie paint job on my front bumper/grill guard today.Just some Rustoleum pro. flat black,want to make it look as good as i can for now.
  22. Bigdogtrucker
    Got my parking lights working today,any place to buy just the lenses?
  23. Bigdogtrucker
    Why not see if somebody still wants it before you scrap it?Sad to see another vintage truck go to China...
  24. Bigdogtrucker
    Just picked up the parts manual,been with the truck since new!Best part is all the receipts,notes ect...from the past 30+ years!
  25. Bigdogtrucker
    When did they stop running them?

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...