Jump to content

Jomorisn

Puppy Poster
 View Profile  See their activity

  • Posts

    27

  • Joined

  • Last visited

 Content Type 

Everything posted by Jomorisn

  1. Jomorisn
    I'm looking at a truck with the the MP7 motor or should I be concerned issues with this motor the truck has low miles and is priced cheap? Any and all recommendations on this is appreciated. Thanks in advance for your time John
  2. Jomorisn
    The A/C used to work fine in this truck but something hap[peded lately, When my air conditioner is on the fan on the engine doesn't engage and compressor short cycles if I unplug the wire to the left of the radiator the fan engages and it stays engaged and the compressor seems to run longer with the fan engaged. Is there clutch fan is there a relay that controlls the engine fan? Also is there a relay next to the APAD? Thanks in advance for any and all help
  3. Jomorisn
    I will check the headlights work fine it I have no dash or running lights cab lights marker or tail lights I read there’s a pressure switch that can cause this problem but the headlights still work at a loss here I will chase the harness this weekend Thanks John
  4. Jomorisn
    I did replace the relay and still have the same problem not sure where to go next any and all help is great thanks in advance
  5. Jomorisn
    I cleaned all grounds and still have the issues. Maybe bad speedo?
  6. Jomorisn
    I have a 20032 CH613 the dash lights and headlights running lights stopped working. Is there a relay for these? Thanks in advance any and all help is apreciated. thanks John
  7. Jomorisn
    Vmac3, Is the communication connector the green and yellow wires? And thank you for your reply. Thanks John
  8. Jomorisn
    I have a 2002 CH 600 with a 427 it has started with this problem of not starting or stalling when driving and sometimes starts right up and today it would not start for 45 mins and sometimes run for weeks with out an issue It shows codes 6 and 4 and the dash displays No Info it died today sat for about 45 mins fired and I was on my way . Could it be a bad ECM? overheating cooling and then starting back up when it cools down? I have posted this before and have cleaned all grounds and my isssue continues I don't think its a harness problem any and all help would be great thanks in advance Thanks Sick CH
  9. Jomorisn
    I have a 2002 CH 600 with a 427 it has started with this problem of not starting or stalling when driving and sometimes starts right up and today it would not start for 45 mins and sometimes run for weeks with out an issue It shows codes 6 and 4 and the dash displays No Info it died today sat for about 45 mins fired and I was on my way . Could it be a bad ECM? overheating cooling and then starting back up when it cools down? I have posted this before and have cleaned all grounds and my isssue continues I don't think its a harness problem any and all help would be great thanks in advance Thanks Sick CH
  10. Jomorisn
    I have a 2002 Mack CH 2002 427 it will run fine for weeks and then start stalling not starting until it sits for a while then start and stall lately will not stay running and I can't use the truck. it will show No Info on the dash and also throw 6-4 code I have cleaned all grounds that I could find. Can the VECM or the VECU cause these problems. Any and all help would great Thanks John
  11. Jomorisn
    I have cleaned most of the grounds and will cleanup the rest. Thanks for taking the time to answer my post. I really appreciate it I will let you know how I make out. Thanks again John
  12. Jomorisn

    wheels

    Jomorisn replied to carlotpilot's topic in Parts Wanted

    I have a pair they on my Peterbilt now I will be changing to hub piloted and will message you when they are off in a month or so if you’re interested Thanks John
  13. Jomorisn
    My speedometer works fine until I turn on my head lights then it reads high if i shut the truck off and lights and start up it works fine. Thanks in advance john
  14. Jomorisn
    Does anyone know what the black junction block with 2 stud with wires attached next to the starter solenoid is called and what does it do Thanks in advance John
  15. Jomorisn
    What is the J1939 link and when do i find it Thanks in advance John
  16. Jomorisn
    My CH throws 6-4 code what is the J1939 link and where do I find this any and all help would be great Thanks john
  17. Jomorisn
    Brett, Is the 1939J a wire or harness?
  18. Jomorisn
    I have a 2002 CH600 E 7 427 with the stalling issue but sometimes won't start for 45 mins other than the stalling runs fine. it was codes 6 and 4 that flashed but now it won't show any code do they reset themselves? Any help would be great thanks in advance
  19. Jomorisn
    I have a 2002 CH 600 with a 427 it has started with this problem of not starting or stalling when driving and sometimes starts right up and today it would not start for 45 mins. It shows codes 6 and 4 it died today sat for about 45 mins fired and I was on my way . Could it be a bad ECM? overheating cooling and then stating back up when it cools down? I don't think its a harness problem any and all help would be great thanks in advance Thanks Sick CH
  20. Jomorisn
    I have a 2002 CH 600 with a 427 it has started with this problem of not starting or stalling when driving and sometimes starts right up and today it would not start for 45 mins. It shows codes 6 and 4 it died today sat for about 45 mins fired and I was on my way . Could it be a bad ECM? overheating cooling and then stating back up when it cools down? I don't think its a harness problem any and all help would be great thanks in advance Thanks Sick CH
  21. Jomorisn
    I have a 1999 RD690S just turned 418,000 miles with a 25 foot rack body with removable sides with a 5500 LBS capacity lift gate 44,000 rears 14,300 front E 7 300HP 6 speed trans and double frame excellant runs good get in go to work $18,000 or BO Call 603 231 1345 if you have any interest thanks John
  22. Jomorisn
    I'm looking at 1999 RD 690S trying to find the engine and axle specs on this truckVin # 1M2P289C7XM029160 thanks in advance John
  23. Jomorisn
    I have a bracket from the rightside if you’re still looking. Thanks John
  24. Jomorisn
    Is that the one that looks like Ford starter solenoid ? Thanks for your reply John
  25. Jomorisn
    I have replaced the switch and still the problem but thanks for your reply John

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...