Frank Y

Looking for a parts, or junked out single axle pup trailer (28ish footer) that still has a transferable title and data plate. Closer to PA the better. Open also to an orphan title.

Ummmmmm.......Date? Times? Pre-register only, or register at gate? Ya know, the important stuff....

Any more info on this show?

24.5 tubeless dayton rims are available new. Purchased 6 for my truck 18 months ago. Tire shop I used had them in 4 days.

Simply put, hearing this is extremely frustrating. I've been hearing and seeing this in my area too much anymore. Fortunately the owner "made good" for the work that wasn't done. But unfortunately it's the sloppy work that was done that you still need to pay for, and get done again. Good luck with the next, and hopefully more competent shop.

Actually I did some digging last night on that bearing and it comes up as a VERY popular size. Common to Case, Deere, Pete, and a Bunch of others.

You're very welcome. And yes, Mack still uses a similar arrangement for a flexible driveshaft on the longer wheelbase trucks. I've only seen the driveshaft before install but I think it telescopes to allow for movement of the axles. But I know I've seen something similar albeit uncommon. Good luck on the parts search.

Maybe this will help? You're probably going to need a GOOD parts guy to cross these old Mack numbers though.

The 18472 seal number in your pic comes up as a good number online but, will the dims match? Not sure.

Honestly it sounds like something that is still used in new production. Any pics?

Had some time the last 2 weekends so I made some seat brackets. Couldn't find any and I wanted to start using the truck again. Planning on pulling the seats back out once it gets warmer to put sound deadener, and a rubber mat on the floor. Brackets came out good. I'm satisfied.

A small trailer is EXACTLY what I'm looking for. Something that I can throw my 26 chevy on, and head to a show. Or throw a tractor on and head to a show. My concern with a tandem trailer is the tire scuffing while turning. The shows around here are in tighter areas so alot of hard turns. If this trailer is set with a 60" pin, could it have been used with a dolly? One thing that confuses me is that he said they pulled it with a tandem Pete with a sliding 5th wheel all the way back. I just can't see that with a 60" pin distance. 60" won't even work with my single axle B. But yeah, I think greed set in on this one.

Wanna sell? LOL

To possibly ask the obvious question, but did you check for voltage at your trailer cord receptacle on the truck? Possibly a bad trailer cord.

These were on the driver side. Putting a suspension seat on the passenger side now so I would like another set.

Looking for 2 more of these seat brackets that came out of my B61. Are these a part common to B model or an aftermarket part? Thanks

Prepared steel near me is 7.50 per hundred. Still nowhere close. If it wasn't 2.5 hours from me I'd go and see it. Just to confirm that it won't work. Still looking for something similar if anyone knows of something.

Just putting this out there. Sorry if this isn't allowed. Delete if necessary. Found this nice Schertzer single axle trailer in Jersey. Its the exact kind of trailer I'm looking for and would be great behind a B. Listed on Facebook. Contacted the guy and asked if the price was flexible($3500). He said it wasn't, and that he was raising the price. Now $5500. He's not flexible because he can get more in scrap. I was in contact with him and asked about the pin to beam distance, and it measures 60". It's too short to work with my truck, but I have a feeling that the measurement isn't correct. But anyway if anyone is interested I can give you the guy's info.

I wondered the same thing. Airport refueling truck?

Where are you located? There's an mb400 in a junkyard near me that still has the motor.

It's not the same as a B tank. It needs the newer style j brackets. B tanks are about maybe 2 inches shorter height wise. It looks very similar to an older R or DM tank but the larger DS tanks on the DM had the double step.

Yep, the tank I have is 40 gal usable and 45 gal total, with the part number I stated. I would like to find out what model trucks used this tank so I know what model I need to get the larger tank from.

I'm looking to put the 2nd tank back on the passenger side of my B. The tank that is on the driver side would belong on the passenger side, but I'd like to match the tank I have to a larger tank for the driver side. Can anyone tell me what series Mack used a 2MB 4814R P2 tank. Thanks everyone!

Elite Tire International, 317 South Dauphin St, Allentown 610-439-6380 That had used rims when I was looking but I needed 24.5 they had 22.5 at the time.