Jump to content

Joey Mack

BMT Benefactor
 View Profile  See their activity

  • Posts

    9,111

  • Joined

  • Last visited

  • Days Won

    213

 Content Type 

Everything posted by Joey Mack

  1. Joey Mack
    8-9 is related to all of them.. don't buy any pumps yet, check the condition of the wire harness.. I Believe the ECM has only 2 plugs. I know I posted the pin out diagram for them on other threads. And a couple others have too. I think pin 11 + 12 in the J-2 connector are the comm lines. 1-3 are on one line and 4-6 is on the other. To me, this is likely a wiring issue and not an EUP issue.. due to the 8-9 code... Jojo
  2. Joey Mack
    It would cool to win the bid. I figure I could try to fix it up for someone wanting a 2 valve...
  3. Joey Mack
    I have a trailer...
  4. Joey Mack
    i will keep y'all posted i'm workin on it..
  5. Joey Mack
    Brocky,,, I set it up and I have the highest bid at this time... now.... how to get it to my house if I win.. I did get a message from one of our Brothers, offering to help me.. 👍
  6. Joey Mack
    Shute Boom's are awesome !!!!
  7. Joey Mack
    Well, if it is the issue, and you post the repair, I bet I learn something.. Have you pulled the cluster to see if the wires are connected good?
  8. Joey Mack
    Well that would be great... I guess I need to try to place a bid.. Thank you.
  9. Joey Mack
    673.. sounds great. Im not done blasting parts yet. I forgot, I need fuel lines too.. I will keep in touch . Jojo
  10. Joey Mack
    2 valve rocker shafts assemblies, pushrods, and water manifolds to start with... i have one in my shop for about 3 years now. I'm moving slow..
  11. Joey Mack
    Yo..!!! I would pay $500.00 if I had a cheap way to get it home
  12. Joey Mack
    I love mine !!
  13. Joey Mack
    Let me guess... an MP-7 with an Eaton tranny? Have you looked at the wire harness for the speed sensor and tranny for cut or chaffed wires..? You seem to have put a good bit of parts on it with no repair.. I would say a bad ground or short to ground in the wires is the issue.. Peel back the loom and check.. Just sayin'...
  14. Joey Mack
    i would pay $500.00,, but I live to far away... oh well.. I need the parts for the one in my shop..
  15. Joey Mack
    If 392 is not enough info.... then explain the 3 web sites I sent you? Just sayin'.... Luv U Bob,, Jojo
  16. Joey Mack
    https://www.pss1.com/sheppard-292-392-492-592/
  17. Joey Mack
    https://www.rhsheppard.com/products-services/products/remanufactured-parts/identifying-sheppard-cores/
  18. Joey Mack
    https://www.haldex.com/en/na/power-steering-gears/sheppard-/392-series-steering-gears---remanufactured/rg39201x/
  19. Joey Mack
    Awesome... I was looking for a gasser, but this one was so clean and in great shape, I pulled the trigger.. I still have it and really dont want to sell it..
  20. Joey Mack
    I have a 2002 NPR with a 4HE1.. 16' insulated MIckey Body box with small barn doors.. 312,000 miles.. runs great, the whole truck functions great, and the A/C works too... I bought it for $8,000.00 11/15/2016.. You reckon I have a diamond in the rough...
  21. Joey Mack
    Good deal..
  22. Joey Mack
    If it is the newer plastic sender, check to see if it's wired backwards. It's not the key switch.. other things would be jacked up..
  23. Joey Mack
    Yes to same bearings..
  24. Joey Mack
    I wonder if an RD front axle/spindle, is the same? If so, you could use an RD v.i.n. with hub piloted hubs..
  25. Joey Mack
    One Hour Ago... 9/17/2023

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...