Jump to content

Joey Mack

BMT Benefactor
 View Profile  See their activity

  • Posts

    9,116

  • Joined

  • Last visited

  • Days Won

    213

 Content Type 

Everything posted by Joey Mack

  1. Joey Mack
    They keep the spring in line, and saves wear on the box rubber bolsters and torque arms. Are the spring tips worn or the old boxes, causing them to rattle a bit more than usually? I have seen those without the Twinkies, but then when re do them I put the Twinkies in..
  2. Joey Mack
    I really get a Kick out of the Budweiser commercials that show ''workin folk's'' .......... They know that they F'd up.. Hopefully this will reflect on other ''Woke'' company's.. and they look at the ''Real Deal'' Working American MEN and WOMEN.. God Bless America!!
  3. Joey Mack

    Shop Talk

    Joey Mack replied to Onyx610's topic in Odds and Ends

    Sittin' here watching Smokey and the Bandit... I saw a diesel sign in the background... .47/9 cents a gallon... Could you just imagine the money you could make if that was today's fuel cost?? anyway, lots of cool trucks too. Jojo
  4. Joey Mack
    You have an E-Tech.. Unplug the cam sensor and try to start it.. If it starts after a bit of cranking, plug it back in, and unplug the crank sensor in the flywheel housing and try to start it. It will start and run and either of them, but if it doesnt start with one unplugged, the one that IS plugged in needs to be inspected..
  5. Joey Mack
    to some it may seem Crazy.. But That Cartoon really did make a lot of sense.. I am not one to try to ''stream'' any shows, but this posting, has got me thinkin' Yes I may just watch an AMERICAN cartoon.. I hope Hank and Boomhauer are doin ok.. Jojo
  6. Joey Mack
    I found this on E-Bay.. It was cheap, and it is a bit hard to read because it looks like photo copies of photo copies.. However, it also looks like the real book.. I think I paid $25 for it. and I received a book, not a download.. I gues I am assuming you dont have the books you need. Jojo
  7. Joey Mack
    they are less than $50.00 at your local Hydraulic shop.. or at least at mine,,
  8. Joey Mack
    How about puttin a remote gauge on it to see what it really pushes.. maybe a 150 PSI + gauge..
  9. Joey Mack
    Close the valve on the water manifold, and if you have one on the left side of the water pump, close it..
  10. Joey Mack
    Set the switch to defrost. It is operated by an air cylinder, or build air pressure above 90 and slowly slide the vent control knob, and you should hear a loud slamming sound, that will be that door opening and closing.. check to see if the air cylinder and the bell crank are in good shape.. just open the hood and look.. Jojo
  11. Joey Mack
    Is this a puzzle??
  12. Joey Mack
    FJH. It's hard to keep all of that knowledge under control... Just sayin'. 😉... Jojo
  13. Joey Mack
    He needs to creat a new post with pictures..
  14. Joey Mack
    ??????????
  15. Joey Mack
    I just read through the post for the ''th'' time.. I dont see were you pulled the cluster out and checked the plugs and terminal, and also unscrew the mother board to inspect it for dust or dark soldered points, that would indicate a loose weld. I would like to see a picture of the installed cluster
  16. Joey Mack
    Hat's off to you for lasting 35 years... I burned out at 25 years.. Now I have a cushy city job, with my own truck, list of work to do, and a handheld radio.. and no one baby sit's me... I am currently trying to be a driver trainer for my dept. We need CDL drivers.
  17. Joey Mack
    starter celenoid on the firewall near the wiper motor..
  18. Joey Mack
    I bet this has most of the answers you are looking for. Jojo
  19. Joey Mack
    I don't know fuel pressure off the top of my head. What year engine? I have many E-7 shop manuals in my shop at home, and may be able to get you a picture of the page.
  20. Joey Mack
    Are you using a barring tool? Are you pulling the ratchet towards the oil pan?
  21. Joey Mack
    Can I get an,, AMEN!!
  22. Joey Mack
    Exactly!! I bet I post that 2 dozen times a year.
  23. Joey Mack
    ground breaker??
  24. Joey Mack
    My guess is it has air ride on the tractor. They are prone to loosen up at the u- bolts. You may be able to see some shiny metal on the axle housing where it would be shifting. If you strike the ubilts with a hammer and they don't ring out, and they ''thud'' , they are loose. This will allow shifting of the axles.
  25. Joey Mack
    The one major difference I saw was, comparing a twin stick 107 trans, to a 200 series trans, which is air shift in the aux. Box. The twin stick offers several PTO positions and speeds.. Way better than the 200 series options..

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...