Jump to content

Joey Mack

BMT Benefactor
  • Posts

    9,148
  • Joined

  • Last visited

  • Days Won

    214

Everything posted by Joey Mack

  1. ok, I understand now.. But I have no experience with deletes.. I have reversed a couple of them, but never deleted one.. I will just set back and see what others post on this issue. If I have an idea or info, I will come back in.. Jojo
  2. the viens in the turbo dump exhaust to reduce boost.. air intake is not metered. the exhaust flow controls the boost pressure, by spinning the turbo faster using exhaust pressure to create intake air pressure.. a bad egr can cause the puffing you have. I have seen this same issue many times with Series 60 14 ltr Detroit's.. jojo
  3. So, South Carolina Health groups are concerned about the mental health of "Pediatric Transgender Issues" Pediatric???? Really??? What does a 5 year old know about the pain of being a freak??? Thanks Joe Biden for not trying to inject common sense into issues like this...
  4. On top of the oil filter pad is the sensor. You can pull it, install a 't' fitting, put the sensor back in and plugged in then put the gauge in the other port on the 't' and compare readings.. jojo
  5. Prosthetic boobies. But still... WTF?:)
  6. My Wife found this shop teacher from Canada... WTF?? This is too funny, but it's real.. I am so glad I don't have children... I know I would be in jail.. So what's happening in Canada?
  7. Yep, That's what I'm talkin 'bout... I set my legs on fire, then our security gate decided to be a dick, then our central air compressor locked up.... I did fix the security gate today... I was out there with my cane and a stool, and some patience. It was a simple fix, there was a plug, inside that was unplugged, fixed, tested op- ok..
  8. your on a rolll Dave....
  9. GADave... you too always bring the funny and the truth... jojo
  10. Matt.... You are truly amazing.. My eyes welled up while reading your story... I thank God for creating people like you... Jojo
  11. is the VEBC acting up? I see smoke along with the fluttering, and if was an ASET, I would suspect a bad engine brake oring.. I dont know, just a thought,, the video is good just too short.. Jojo
  12. It is so nice to see the bus loads of ILLEGAL'S being sent to Liberal run cities.. N.Y.C. just got a shipment of 6 busses.. I look forward to them going to Seattle, and California Lib. cities.. Good job Gov's. Desantes and Abbott...
  13. howdy, So have you had any more success? I know you said the speedo is inop, I have an app. on my phone called digihud, its a simple speedometer, with a large display thats easy to read.. I use it during test drives, and when I am calibrating a speedo head... jojo
  14. I really need to get up and running. But i'm still jacked up... I have some repairs to do.. the day my wife took me to the doctor, our remote control security gate decided to take a crap, and Friday our home a/c compressor locked up, and we are about to have another 90 degree week.. What next??? jojo
  15. twice a day for me..
  16. Mark, I cant use gauze because it will rip my skin off, if you were here to see it, I can rub the wound and my skin tears like thin sliced balogna.. So I use non-stick bandages with burn cream, then mummify my legs with dry gauze wrap.. I have to cut it off and toss it at each change... the yellow slime on the bandages is almost enough to make someone puke... jojo
  17. Thanks Bud, I look at them and kringe... a simple mistake, turned into this... ..
  18. Prescription silvadene.. Is what I'm using..
  19. highly likely.... you work quick.. 👍
  20. sure does idle high.. should be around 650.. glad its running...
  21. well, if the test drive is good, I would just put the starter button in it with a 25 amp fuse.. like I said earlier, you can do a clean job, and use a power post, in the top fuse panel.. just use one that powers up with the key.. jojo
  22. just saw the picture.. Im sorry bud,, Im at a loss.. try the starter switch idea.. to test it you can just use a jumper wire, leave the key on.. let me know..
  23. so you didnt see the fuse in the panel on top of the dash where the C.B. goes?
  24. Thanks... Too funny..
  25. did you look in the top panel on the dash? I mistakenly said it was in the EPDM.. jojo
×
×
  • Create New...