Joey Mack

I would say.... Just keep doing what you do Paul.. even with air dryers water still collects, and guys just expect them to work forever, and they don't... Even with a dryer, when you pull the tank vent cables, water still comes out,. Not a whole lot but some.. just my 2 cents... Jojo

Great news about the lines.. I have built 1, E-7, and 2 E-Techs, and 2 ASET's. An AI and An AC... All are running good and making money.. I measured the liners and the pistons and compared them to Mack parts and they were the same. The PAI kits come with more parts than a Mack kit, including head gaskets.. the bags of gaskets and o-rings is great.. it even comes with the little sealing balls for the piston cooling tubes, and depending on the level of the kit you buy, you may have new cooling tubes as well.. I also use their oil pumps, and cam kits. Cam kits are better than Macks current kit.. the bushing set for an E-Tech was just over $100.00... you will need to order connecting rod bolts separately.. I have had great service from the PAI parts... At half the cost or less... Jojo

The line is in the center port. That is a D-2 gov. He should be able to plumb it right using the posted diagrams.. jojo

Yes sir.. I almost mentioned the compressor mounted gov. But thought I should see what is asked next.. you the man!!! Jojo

I don't know if I would know what a spammer looks like..

You make me laugh Mech.. do you think the diagram I posted is good enough info? Is it missing something? Jojo

It's really sad that he cant remember that his son died of brain cancer and not in combat in Iraq... OMG....

you can also use the WEB and go to the dryer website for what Mech Is saying.. the info is out there ..

Paulie,,, did you see the B+W diagram I posted? It really is that easy... jojo

OK Mech. this last pic is for you...

the 1/2" connectors was probably a by-pass, due to an issue... just look at the diagram I posted and follow it... it easy after you stand back and look at it.. jojo

gov. is controlled by 1/4 lines...

ok,, im done stealing this thread... jojo

here are some more...

Onyx,,, is that the one with the bolt through the bottom that holds the filter in place? or is it the small one with the screw on filter?

A ground not hooked up???

AD-9 is the best... big,,, but the best.... IMO..

I only have around 100 books, but its easier to go to the web while im in my jammie's, then go out to my shop and flip pages.... You'll know when I'm posting from my REAL book's... jojo

heres my secret....... go to the web... and type in,, Basic air dryer and governor diagram..... I answer so many questions by doing this... I copy and Paste, and Vwalla... jojo

I also like the larger FONT... Or did my eyes get better??

They did NOT come in the Eaton box in the background... Oops....

Well, guy's... I got my NEW wheel cylinder's today for my '48... $365.00 tax and shipping included.. 6 days to get them... Not bad considering today's crap.... First time using this company, I will try them again as needed... If the picture is not clear enough let me know, and I will re-shoot the pic and P.M. it to you... Jojo

Cool Idea.. all I can think of is "Mack" in the movie,. "Cars"... Now I want to watch some trucker movies from the 70's..