Joey Mack

Amen to Jim Jones..

Hans, there is only one in the kick panel... the other is ABS.. your right..

I really get a KICK outa you Aussie guys... I love it !! jojo

Man I wish I had been in one recently.. to refresh my memory. I know there is a group of ground wires left of the fuse panel behind the panel that says CL 700.. Have you checked it?

I know.... Truly sad !!! got back from my 2 road calls. One cust. was a no-show. the other job took 45 minutes.. $60 bucks.. My costs out the door today $83.00... Just one of those losing days I rekon... well back to my shop, jojo

Great !! I hope to see a post saying you fixed it and how? Good Luck T.... jojo

$5.25 today, just pumped it..

👍... $150/hr here too.. I know I'm cheap, but in my area, I'm competitive, a bit low though.. I would rather be in my shop building Mack E-Techs. I just cranked a John Deere 3179DF yesterday. I re-built it from a bare block. I also have an E-Tch and an E-6 2Valve in my shop. Almost done with the E-Tech. 1/2 way through the E-6. That one is for a restoration that is taking a fews years to get done. I'm about to un cover it and go at it.. Ok, gotta go.. 2 road calls today.. jojo

I understand, I guess I was thinking that in those gears you are pulling hard to get up to speed.. I hope you get this fixed soon... jojo

I'm just a 'Guppy' in the ocean called "business".. but these high costs have an instant impact on me. My service truck is a diesel, I get around 12 mpg. 30 gallon tank. Certainly nothing compared to my old Century class truck with 2 (95) gallon tanks. which I owned in 2005-06 when fuel was $5 bucks a gallon in the northeast region, where I ran the most.. My issue is that I dont have A large reserve of money, because I am so small and can only do so much work by myself, I dont pull in big buck's. I have 2 road calls to do this morning and I need to squirt some fuel. So I will probably buy $50.00 worth, to go out and gross $150-$200.00.. That isnt business owner earning's, thats employee earnings at Wal-Mart. then factor in that all of my products have gone up 50-100%.. IE: Brake cleaner/ Penetrating oil/ Grease tubes/ all forms of oils that I use/ D.O.T. brass/ ect: My cash rate is only $60/ hour, Now I have to raise my price to ALL of my customers. Anyway, I know I went out there a bit, but to me it's all the same issue... jojo

did the shop check the u-joints, and air ride height? just curious? has the drive shaft been apart and put back together wrong? I know you have a 12 spd, just curious.. jojo

What's going on, is the intentional destruction of the core of our great country!!! The lib news talks about the issues, product shortages, high rent, high food prices, high fuel prices, and all of of us white people are racist... And they love every minute of it.. They are fueling the fire that is burning us to the ground.. FJB, and K.H. and N.P. and Mayorkas , and so many more.... dammit, I get so pissed off !!... Jojo

thats it !!! its quick and done.. jojo

I dont believe they are the same metal as piston rings.. the E-9's I worked in recently had the rings and they were steel not piston ring metal.. however, im in no position to tell you what to do.. just thinking outside the box.. jojo

i have never tried, but is it possible to remove the rings, clean the grooves, gently heat the rings and stretch them out , and when they are larger pour cold water on them to set them to size, then re-use them?

its sh!t like this that chaps my A$$ !!! M-Drive is f'n junk... period... my wife was a service writer at Our local Mack dealer 4+ years ago and she said that Hilco Transport would request a new tranny under warranty and it was still 13K , no warranty, the cost was around 16K .. for a re-man.. Mack pro? can you confirm my wifes memory... its been a while.. I hope my E-7/ E-Tech rebuilding plan pulls through.. I wish I had tranny tools, but its hard to beat "Overdrive rebuilders" in my area... jojo

Thanks Glenn.. God Bless you sir... jojo

pull the trolly brake handle down and try again.. older trucks used to have a 'lockout' for sliding the fifth wheel. I guess they want ed you to be sure the trailer brakes are set before you slide.. jojo

Thanks guys... Now... Back to work... jojo

My God Guy's ... Thank's to ALL of you.. I am blessed to have the friends here at BMT.. With love... Joey Mack..

Thank you guys.. What a great present !.. I feel the love .. Thank you ALL so much... Jojo

👍

Thank you so much!!!! I didnt pick up a single wrench YET today... I wish you well... Jojo

Just curious, can Mack hook PTT to it and look at the history that way? jojo

http://www.gonefcon.com/trucktcom/brakes_comp_unloader.gif A bad Gov. is possible. here is a typical plumbing diagram. mabey the lines are switched.. jojo...