Jump to content

Joey Mack

BMT Benefactor
 View Profile  See their activity

  • Posts

    8,966

  • Joined

  • Last visited

  • Days Won

    210

 Content Type 

Everything posted by Joey Mack

  1. Joey Mack
    the hand primers suck!!! MP-7 is not replaceable, gotta do a whole pad.. MP-8 can be replaced... 'F' n 'V', are on a good path... jojo
  2. Joey Mack
    👍
  3. Joey Mack
    PTF Pipe dope....
  4. Joey Mack
    you can remove it and reseal it, or give Vulva $600.00 for a single aluminum tank kit... jojo
  5. Joey Mack
    yes... remove the cup holder first, the the tray it sits in, then the 2 torx screws in the panel ,then the torx screws on each side edge of the panel, then it will drop down and out from the bottom. there is a plastic guide pin in the bottom center edge, to clear.. no biggie.. once it is off,, to the right will be the 3/4" opening where a blue filter may be.. thats were the action happens... I bet the core is packed with dirt... you can try to blow it out, but sh!t will fly everywhere... jojo
  6. Joey Mack
    have you pulled the duct on the right side of the of the HVAC unit and cleaned out the dirt that is in there... just remove the screws and and pry it back about an inch and a half. I made a cardboard tube that fits on my shop vac, and flattened it out so it can squeeze in to clean the evap core.. it's gentle enough to avoid damage as long as you are gentle with it... jojo
  7. Joey Mack
    its all good.... that is what this site is here for... keep in touch... jojo
  8. Joey Mack
    Amen!
  9. Joey Mack
    I really havent ever replaced one unless the wires shook so much, that the insulation fell off.. of course, replacing it isn;t a bad idea. I'm still not clear, why you are changing parts.. what is the issue?
  10. Joey Mack
    I think it's the high pressure switch for the engine fan... the dryer switch is binary for the A/C .. are you having trouble with it? jojo
  11. Joey Mack
    the spacer means it's Jacob's...
  12. Joey Mack
    yes sir... one has Jake 690, and the other may be 'Powerleash'.. I'm curios too... If there wasn't an ECM.. this would be a breeze... jojo
  13. Joey Mack
    Yep! Thought so, jojo
  14. Joey Mack
    Damn smooth shifter... I bet he's more aggressive with the me@t stick?? jojo
  15. Joey Mack
    You know I'm curious..... jojo
  16. Joey Mack
    well, iv'e been tinkering.... I put new glass in him, (Sanford).. just pickin. at him.. no way in hell am I a finish work guy, but I got him running and when I get the brake's to work, I will drive it some more, in my neighborhood. I use the hand brake to stop it.. I will post pic's as I go.. I have the chrome strip's minus the 2 that say,,, 'International' for the hood... but,,, I bet I find a Pair,,,,, woop's.... that last one is what my wife say's.. jojo
  17. Joey Mack
    here's a picture of my 'Really Big Mack' he's my buddy and when i'm on a creeper he is right there to sit on my chest and lick my face... his name is.... Mack...
  18. Joey Mack
    Rainbow for sure... jojo
  19. Joey Mack
    I told you way back. Oct. 5th.. jojo
  20. Joey Mack
    a 'jug cant handle the volume of fuel that will be pumped...
  21. Joey Mack
    any chance you have access to a banjo fitting that is the right size to fit the fuel pressure regulator on the front of the head?, if so, you can attach a clear hose to it that is long enough to go back to the filler cap and in the fuel tank, down into fuel, run the engine and see if there is air in the returned fuel. it will look like suds/ beer foam.. make sure the line is in the fuel so you can see the bubbles in the fuel. if you see a lot of air, darn good chance the injector cup o-rings have failed.. There really isnt any repair shortcut's for this issue. If you cut corners, you will just be 'pissin in the wind'... jojo
  22. Joey Mack
    Bingo!!!!
  23. Joey Mack
    cool lookin rig.. Sorry Bud, I'm out..., but curious... Jojo
  24. Joey Mack
    look up Moto-Mirror.... its doable. jojo
  25. Joey Mack
    were is the picture??? or model/year?

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...