Jump to content

Joey Mack

BMT Benefactor
  • Posts

    8,952
  • Joined

  • Last visited

  • Days Won

    209

Everything posted by Joey Mack

  1. I would pull the valve cover and see if the injector hold down cap is loose. They torque to 50 lbft
  2. Is it oil? Is it only coming from around the threads on the injector line?
  3. Joey Mack

    Lights

    Follow the wires along the frame to look for damage, also check connections of the hood harness. It is right in front of the steering box. It may be clamped to one of the mounting bolts. The steer tire slings everything you drive over, right on to the plugs. Its also a pivot point for the hood. Start simple first.
  4. Lmackattack, did you look at the picture of my pushrods? Curious if they are the same as your tip turbine engine. I want to send them to him if they will work.
  5. not a bad idea.. I will send my adress to him now..
  6. yes.. my pushrods are 20 years older than his, however, will they work?? I dont know, I dont have an E-6 (2V), here to compare.
  7. sweet, When he says they are good, I will ship them to him..
  8. Mech... go back a few posts and click on the new link I posted..
  9. Mech, take a look at the 2v-4v post.. it needs your brain
  10. ok, bud.. I hope I have the right ones, mine came out of an ENDT 2 valve. I dont know if they crossover either.. hopefully they will work. Mechohaulic, FJH, MarkT, and GW, and so-on,,, will know..
  11. https://photos.app.goo.gl/rkuH9RtMR3oyu3ZM9 Here, try this...
  12. really??? I see the pictures on my posting.. strange..
  13. The # is 1140.. I hope these are correct. If so, I will ship them tomorrow.. Jojo
  14. D,smoke... P.M. your address to me, and i will clean 2 up for you and get 'em comin...
  15. Do you need a pushrod? I have some extras. I can mail one to you.
  16. PAI should have what you need as far as gasket kits. Check out thier inventory. You may only be able to buy parts through a vendor, and not directly from PAI..
  17. if you intend on getting the heads planed, please be sure they know how to cut the fire ring grooves. if they are straight then just polish the deck. valve seals take a little effort to replace, do you have a set of them? how do the injector bores look? how are the rocker arm assemblies? do the rockers move freely and smoothly without fetching or rattling? sorry aboout all the Q's.. I'm just chatty i guess... jojo
  18. same here Tom.. I e-mail them to ME then make a lnk, then post the link, and sometimes the picture does show up, then.... well, you get it....
  19. DITTO... What ''BOBWhite'' said..
  20. when you replace the tanks, I reccomend the aluminum updat, its 1 peice, and the coolant sensor is higher up in the tank, so that the light wont come on when your a pint low..
  21. looks like someone was climbing on the engine and used the rad. tank as a step.. there is a single alumnum tank update for that crappy set-up.
  22. This is why I was asking why it was cut..
×
×
  • Create New...