Jump to content

Joey Mack

BMT Benefactor
  • Posts

    9,913
  • Joined

  • Last visited

  • Days Won

    223

Everything posted by Joey Mack

  1. maybe you will find a clog and clean it out for re-use.
  2. have you pokes a small pick or something up in the hole?
  3. fjh,,, I am pokin my brain. I guess the cover can come out, the rails just go in and out of the case during gear selection... Gosh I'm rusty.. I really need to build another 107 just to get back in the groove.
  4. if you are just pulling the stick out, your good to go.. 4 bolts, and straight up and out,, as far as pulling the top cover,,,,,, well,,,,,, the shift rails go through the front and rear case's.. it's been many years since I had one apart, and they all were out of the truck.
  5. Yeah, i'm sorry bud.. I wont do much good on this one...
  6. it looks like it is being used as an accessory relay.. there should be one in the cab under the ash tray too.. I wish I could help with a schematic. all I have is some old notes from some RW's I worked on. looks lie a lot of added wires as well as dissabled wires too.. I assume you are wanting to clean it up..
  7. I bet the pet cock pee holes are clogged with that coolant conditioning powder that comes in the filter kits..
  8. I hear that interest rates went down a small amount, and 401K's went up a bit.. It is a small but forward moving occurance.. I'll take any positive news...
  9. Well aint that some SH!T !!!! Thanks JoeH
  10. I hope so.. N.C. law requires I.D. to be shown when using a debit card at the liquor store. Been that way for years. Just one of many examples...
  11. I had similar experience with Mazda 5 spd. I beleive it was an M5R2... The F-150 i was working on lost 5th. After 2 salvage yard trannys with the same issue, Ijust took the trannys back, and brought my tools with me. They let me pull the top covers off all the Mazda trannys they had... When i was done, i left with no tranny and a refund, and they said those trannys were going to the scrap pile.. i never did finish the job, the owner threw in the towel..
  12. Roo got kilt.
  13. you may be able to make up a fitting to attach to the banjo fitting port on the rear side of the head. I dont remember if there are any plugged ports in the heads fuel gallery..
  14. why are they on an airplane? I thought they were are ''Greenies''... I guess you never know......
  15. American Whores prefer cocain over dinner... So i've been told..
  16. I laugh at these Lib's that can somehow,,, hold thier emotions long enough to set up thier phones to make a tik-tok video of them breaking down in tears... what a joke.. Aligator tears, and Hummingbird a$$es is what I see..
  17. Hell, I hear that Kumala was a prostitute,, I mean escort, really whats the difference?
  18. yeah... God didnt build us to bump the same uglie's and make babies.... Good Point TJC....
  19. ok, sounds like a power wire is shorted to ground. did you identify what circuit the fuse protects? any fault lights/codes
  20. I have to try to convert your words to english, lo siento...
  21. ''D''.. can you start over, and give us the year of the RD? and a better description of what happened? is the blown fuse #40, in the fuse box under the hood?
  22. Ok. They set all the way in til it touches, and back it out 1full turn..
  23. I see those posts on 'X'... They are funny, too bad they are fakes...
  24. That dash cluster is a circuit board . Is the VSS a screw in or push in with a set bolt?
  25. What doesnt work???
×
×
  • Create New...