Jump to content

Joey Mack

BMT Benefactor
 View Profile  See their activity

  • Posts

    9,815

  • Joined

  • Last visited

  • Days Won

    222

 Content Type 

Everything posted by Joey Mack

  1. Joey Mack
    That is a block heater.. it keeps the engine warm during cold winters. Inspect the wire coming from it to the engine block to be sire it is not damaged. If it is good, and usable, you can plug a drop cord into it when at the end of the day, and it will keep the coolant warm. This helps in starting the engine the next day.
  2. Joey Mack
    728 C.I.D. in the E-7.
  3. Joey Mack
    Gotcha'...
  4. Joey Mack
    I guess any kind of water pipe foam tubing. If neatness counts, i dont know whats out there.. have you checked the oil level in the tranny?
  5. Joey Mack
    RW-613/002217.. Use this VIN to get the terminal strips you need.. OK Heinz,,,, your up next
  6. Joey Mack
    Is that valve silver with a red button on it, and is 'teed' into the treadle valve?
  7. Joey Mack
    Maybe Heinz can run a VIN that I have and get the right numbers.
  8. Joey Mack
    Its likely governed at 2100 rpm's. E-7 will pull, just need to be patient.. much slower than many other trucks, especially the new trucks.
  9. Joey Mack
    theres a great group here, and you are an addition.. thanks for the respect.. Jojo
  10. Joey Mack
    Mech,, the temp sensor in this is a 2 wire. it sends its signal to the VECU.. I bet you are thinking of the single stud type that grounds to the block.
  11. Joey Mack
    what year is the truck? I may have made a mistake. isnt there a sensor on the output bearing housing?
  12. Joey Mack
    speedo should be electric. the pick up is in the output housing.. screw it in til it touches, then back it out 1 FULL turn. My guess is you are asking if the plugs are the same? yes.. you can jump the wires to see which gauge reacts, that is if you are having trouble identifiying them.
  13. Joey Mack
    grease. the plug in the picture is an air bleeder. it looks like it may be sealed by paint. pump grease in until it comes out of the bleeder. may want to just put modern spring loaded bleeders in the trunnion caps so you dont bust the caps.
  14. Joey Mack
    Holy Sh!t!! rails are so important for us as a country.. be safe out there,,
  15. Joey Mack
    DM.. sorry, I didnt see the offset cab that good.. I see it now... Hell of a truck there sir..
  16. Joey Mack
    Oh Hell.. Glad no trains crossed that track..
  17. Joey Mack
    Is that your RB?
  18. Joey Mack
    U R getiin' it done JoeH... 👍
  19. Joey Mack
    Thise are on a seperate switch. Right there with clearence light and the dimmer, its the other switch
  20. Joey Mack
    fuse 40 in the fuse box on the fire wall..
  21. Joey Mack
    I wish my city had an RD.. I have been driving a Ford Louiville with a wimpy Cummins. I suck at driving Cummins.. This truck cant pull a wet string out of a cat's a$$ under 1500 RPM's.. Makes me love the Mack more and more.. Oh that's empty by the way... 14 tons in the box put's it at 50K.. and it sucks.. Too bad, it has a transmission that I like, 8LL. top speed is 62ish..
  22. Joey Mack
    nice save..
  23. Joey Mack
    looks good,, By the way, Your tarp bar is bent..
  24. Joey Mack
    I bet $600.00
  25. Joey Mack
    Commiela, says she will tax Billionaires and business owners fairly... What about Millionaire's? Because she IS one.. She's going to finish the KILL, when she get's appointed..

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...