Joey Mack
-
Posts
8,994 -
Joined
-
Last visited
-
Days Won
210
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by Joey Mack
-
Welcome to the Dog Pound, Sergey
-
Ooop's
-
why is the fan not centered on the radiator? Just curious..
-
If you get a clear jug, like a juice jug for example. you can attach a 1/4'' line to the small nipple on the fuel pressure regulator, and put the hose in the bottom of the jug, and keep it submerged, and run the engine, and look for air bubbles. have someone there to shut it off before you over fill the jug.
-
many years ago in Maine, I had a basic 2wd Toyota pick-up. 4 banger with a 5 spd. I used to offer snow blower services in Old Orchard Beach. lots of small houses that a plow truck wouldnt do well there.. They liked my service because it was clean and there was no damage to their grass and hardscapes.. anyway, I was always chained up, and I would keep a bag of 'S-Hooks' in the truck along with a Channel lock pliers. every time I broke a link I would squeeze an 'S-Hook' in place of the broken link, and roll on.. You wont catch me doin' that crap today, just sayin'....
-
The range clutch basket has the letter ''R'' stamped inside of it to indicate, reward..
-
I would check fuel pressure.. should be around 80 PSI for that year
-
Is the miss at low idle only, or throughout the engine speeds while driving?
-
nope, still pissin' my wife off..
-
Nothin...
-
Rebuilt turbo and noise in the intake
Joey Mack replied to RS Disposal's topic in Engine and Transmission
Does your air compressor get it's air from the manifold? If so, it is taking in boosted air.. -
Electronic Speedometer not working.
Joey Mack replied to Patrick Sweeney's topic in Electrical, Electronics and Lighting
Are there dip switches on the back of the speedo? -
Ok..
-
I can't talk right now, sorry.
-
Ok.. did you put new orings in the shift fork assembly
-
Is the snapring in the center of the synchro installed or broken. If it is left out, it will only shift once, and then you have to go back in to the rear box.
-
Rebuilt turbo and noise in the intake
Joey Mack replied to RS Disposal's topic in Engine and Transmission
Have you unhooked the air compressor intake pipe, to see if the noise is the compressor? -
2003 MR688S rollover cab swap
Joey Mack replied to JoeH's topic in Modern Mack Truck General Discussion
Did voltage go up when it was running? In the past, when we had a major voltage drop, I would take a separate battery and ground it to the truck, then connect the positive to the EECU fuse socket, with the fuse installed. If the truck fired up, it would indicate a bad starter.. the starter was pulling too many volts.. as far as a miss, not sure yet, I assume valves were adjusted recently? -
Connecticut Construction Trucks
Joey Mack replied to BKrois's topic in Antique and Classic Mack Trucks General Discussion
Brings back memories.. I did a year and a half in some old Macks for a construction company in Scarborough Maine.. I hauled salt to a bunch of municipalities.. Cool pic's.. jojo -
We are supposed to have 50 MPH + winds over the next day and a half.. Here is what I do for added security.. I figure a 4,500 lb fork lift should hold it.. Is that Redneck enough for ya ? Just havin some fun.. jojo
-
Connecticut Construction Trucks
Joey Mack replied to BKrois's topic in Antique and Classic Mack Trucks General Discussion
Nice truck !! You mind gettin' me a nice slice of 'pie' while your right there? Jojo -
I dont miss it either. I only ran I-81/88/90/80... and so-on for a little over 2 years.. I'm more of a mechanic than a driver..
-
exit 15 off I-84, get on #6 and go to you..
-
ok,, I guess I could have looked at my old Trucker's atlas to see where you are.. Actually, im going to get it and look, just because, Yes Mech,,,, I said ATLAS.. I dont need to use my phone to find you on the map..
BMT Forum Logo
