Jocko

hey guys im looking for a classic 1950's single axle dump trailer for my b model.Any brand,any condition.willing to take anything.the picture just gives a round about estimate of what im looking for.thanks

yeah its a good trans, its still all tight nothings loose

ok thanks i was just wondering why it said that

in my b-model i have a 9 speed overgear transmission and i was wondering why it says not to shift 5th in low

thanks guys i apprieciate the replies;)

hey guys i recently found out that my 673 has a bad injector i was wondering if anyone knew where i could get new injectors for this engine.

hey guys does anyone know how to adjust the valves on an end 673 Mack engine.thanks

yea i think that would be great if evryone here got a truck i know i could use a parts truck,also where is this guy located

thats a really cool set up

let me clarify: also i only had the top front bearing on fall out,not all of them.

thanks rhasler when i was under there i looked at all that and the pins were still good.i think something is wrong with the crankshaft because when i put the bearings back in, the front thrust bearings were loose and the back were tight.could it be that the crankshaft isn't spaced properly.

does anyone know how i could go about fixing this

because once i started the engine after i put everything back together i heard a clink and i think that was the bearing coming back out again

i did the same thing,the only thing different with mine was when i put them bach in they fell out again

hey guys when i took the belly pan off my end 673 mack one of the thrust bearings was in it. i was wondering if someone could please give me reasons of how this could happen.

mackb.bmp

ok thanks,i wasnt sure if it was the same as the connecting rod bolts,and also i dont have a manual,if someone could post the tourque specs that would be great

how much tourche goes on the brg caps

i apprieciate the help guys,i didnt state this before but the thrust bearing that came off was the top one,and im preety sure that there is no pin on the top,how could the top one of come off

what would i have to take out to get to that

ok i think i have a problem,when i took the oil pan off of the truck to do the connecting rod bearings,one of the brass thrust bearings came off and was sitting in the oil pan.can someone tell me how this could happen and how i can fix it

thanks

tjis is what it used to look like

mack3.bmp

hey guys im about to change the connecting rod bearings in the 1959 mack end673,and i was wondering when i put the connecting rod bolts back in how pounds of tourch each bolt should have,

also heres an update of what my dash looks like now

mack b 2.bmp

hey guys im about to change the connecting rod bearings in the 1959 mack end673,and i was wondering when i put the connecting rod bolts back in how pounds of tourch each bolt should have,

also heres an update of what my dash looks like now

hey guys my b model sprung a leak in the passenger side tank and im not interested in buying a tank yet,(im gonna see if i can get the original one fixed),but the tank is a 40 gallon square tank,i was wondering if anyone in jersey had one that they would sell if i need one