Jump to content

Jocko

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    524

  • Joined

  • Last visited

 Content Type 

Everything posted by Jocko

  1. Jocko
    thats a really cool set up
  2. Jocko
    let me clarify: also i only had the top front bearing on fall out,not all of them.
  3. Jocko
    thanks rhasler when i was under there i looked at all that and the pins were still good.i think something is wrong with the crankshaft because when i put the bearings back in, the front thrust bearings were loose and the back were tight.could it be that the crankshaft isn't spaced properly.
  4. Jocko
    does anyone know how i could go about fixing this
  5. Jocko
    because once i started the engine after i put everything back together i heard a clink and i think that was the bearing coming back out again
  6. Jocko
    i did the same thing,the only thing different with mine was when i put them bach in they fell out again
  7. Jocko
    hey guys when i took the belly pan off my end 673 mack one of the thrust bearings was in it. i was wondering if someone could please give me reasons of how this could happen. mackb.bmp
  8. Jocko
    Right out of the past.
    if you dont mind me asking i would love to go to one of these shows where are they held and do you know if any are on the east coast
  9. Jocko
    ok thanks,i wasnt sure if it was the same as the connecting rod bolts,and also i dont have a manual,if someone could post the tourque specs that would be great
  10. Jocko
    how much tourche goes on the brg caps
  11. Jocko
    i apprieciate the help guys,i didnt state this before but the thrust bearing that came off was the top one,and im preety sure that there is no pin on the top,how could the top one of come off
  12. Jocko
    what would i have to take out to get to that
  13. Jocko
    ok i think i have a problem,when i took the oil pan off of the truck to do the connecting rod bearings,one of the brass thrust bearings came off and was sitting in the oil pan.can someone tell me how this could happen and how i can fix it
  14. Jocko
    thanks
  15. Jocko
    tjis is what it used to look like mack3.bmp
  16. Jocko
    hey guys im about to change the connecting rod bearings in the 1959 mack end673,and i was wondering when i put the connecting rod bolts back in how pounds of tourch each bolt should have, also heres an update of what my dash looks like now mack b 2.bmp
  17. Jocko
    hey guys im about to change the connecting rod bearings in the 1959 mack end673,and i was wondering when i put the connecting rod bolts back in how pounds of tourch each bolt should have, also heres an update of what my dash looks like now
  18. Jocko
    hey guys my b model sprung a leak in the passenger side tank and im not interested in buying a tank yet,(im gonna see if i can get the original one fixed),but the tank is a 40 gallon square tank,i was wondering if anyone in jersey had one that they would sell if i need one
  19. Jocko
    Name: Peterbilt 359 (1987) Date Added: 11 January 2009 - 07:00 AM Owner: Jocko Short Description: 20 speed spicer on air with a 3406B Cat engine View Vehicle
  20. Jocko
    false alarm after all it wasnt the front seal,after i pulled the radiator out i started the truck and noticed that there was only a oil line leaking on to the pulley, i changed the hose and the truck is good as new
  21. Jocko
    A Mack B43S
    why isnt there a b model cab on that truck
  22. Jocko
    ok thanks guys
  23. Jocko
    do you know what size it is
  24. Jocko
    is there a certain size for the seal
  25. Jocko
    hey guys on my b model the front seal of the engine cam went and its leaking oil pretty bad i was wondering if anyone knows where i can get one

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...