Jump to content

Mean Green

Bulldog
  • Posts

    402
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Mean Green

  1. Terry I looked at some pictures and your right they do look the same
  2. Thanks Matt I hope so too I didn't want it too close to the tires It would have looked too big then
  3. Brockey I don't really leave it anywhere to lock it
  4. looks like most of them are a handle and no lock I might just go with the ones that were for rear doors they don't have the hole in them and it looks like they have to be the larger one not the short ones from a smaller amc I don't really care if they lock
  5. I think your right Larry I just pulled one out and it has amc362130 on the inner non locking and looks like amc360202 on the outer locking ones both are labeled right they are in the left upper door
  6. this one is a 36 witch is the size I wanted its 90 in wide its a little big but once it's mounted I can adjust my stack out to cover some of it and it's only a bit higher than the cab .I'll have to get it set on there to see exactly how it's going to look I'm just happy it's not all rotted out
  7. one air horn missing and shorter mirtor
  8. I will Brockey I all ready pitched the disgusting mattress out of it and removed the old boot still working on getting all the doors to open
  9. Thanks for the info paul i havent been able to fine any thing on it this one came off a 1982 freightliner if I have to ill make some other kind of latch work
  10. Found this on Facebook and went to Toledo Ohio and picked it up today says its a bunker brand never heard of them anyone know anyhing about them i need some door latches
  11. Thank you Mike I'm just glad it's drivable again I didn't know that about the plate I just needed to find one close to the year of the truck to have it re issued the state only wants the year to be right in this case close cause it's a 64 plate
  12. you can pm me on here a price if you want this one looks like it will work for now the one I pulled is an old McCord one that only has mounting on the sides others I found had brackets on the top mine was in terrible shape
  13. I lucked out and a guy I worked with had some old radiators and one was the correct width but a few in shorter so I made se new brackets and a crossover tube for the bottom and I decided to eliminate the shutters as I don't drive it much and made my own grille out of one I found laying around
  14. Mike I called around and no good on finding a replacement an Paul I did try some stop leak a few times and it just don't want to hold anymore I only take it shows so I don't haul anything
  15. Making my own seats right now using an air ride base with a volkswagen seat cobbled to it
  16. Hello all well the rad in my b no longer wants to hold water pulled it out its an old mc cord one I haven been able to find one like it and mine went to the shop and they came back with a 1500 dollar price tag to re core it and my tanks look terrible I'm wondering if anyone else has put a rad frome something else in its place or made one out of an old air to air cooler my rad mounts in a housing all I had to remove was the grille shell and the shutters the fill is on the pass side along with the top port and the bottom port is on the left any ideas are appreciated thanks Kevin aka yes I'm cheap
  17. Or just run all pipe and no muffler rember straight pipes save lives
  18. your videos are always a great watch keep um coming
  19. I think it 4.62 if I rember right it's in latrobe pa
  20. b model rear end and 5th wheel was in truck last year everything works please don't come just to junk it you haul I can load free double reduction comes with great tread 30 year old recaps
  21. its better to fix the problem rather than delete it I see too many trucks coming into work having to reinstall everything after a delete cause they got caught .Better to be in the poor house than the big house
  22. I travel for work but I don't get down that way
  23. saw it on craigs list have nothing to do with them says west Virginia 1500 bucks
×
×
  • Create New...