Jump to content

Old Macks

Puppy Poster
 View Profile  See their activity

  • Posts

    37

  • Joined

  • Last visited

 Content Type 

Everything posted by Old Macks

  1. Old Macks
    I have a E9 powered Mack with a factory air clutch and the cylinder is leaking. Does anyone have a information on that set up or source for parts?
  2. Old Macks
    Looking for these two valves. Both are marked BW and the double check valve appears to have 21220 stamped on it. Any help would be appreciated. Thanks.
  3. Old Macks
    The Mack museum did not have much information. Hoping someone on here may have one I can copy. Thanks.
  4. Old Macks
    Thanks Steve. I appreciate it.
  5. Old Macks
    I do not have a copy of that book. Does it have information on the EN540? If so, can you post it?
  6. Old Macks
    Does anyone have the specs for EN540 pistons?
  7. Old Macks
    Looking for old style diamond plate like this. It was used on some 40s vintage macks steps.
  8. Old Macks
    Not sure there is such a place but would appreciate any recommendations. A lot of the parts like pistons, etc. will have to be made and or sourced. Thanks.
  9. Old Macks
    Thanks. I called and he does not have anything.
  10. Old Macks
    Looking for a set of 6 NOS EN510 or EN540 pistons and/or rings. Thanks.
  11. Old Macks
    Thanks.
  12. Old Macks
    Thanks for the suggestions. I appreciate it.
  13. Old Macks
    Looking for a tan L model steering wheel, 1 1/8" spline. Thanks.
  14. Old Macks
    I have a pair off a LS firetruck
  15. Old Macks
    865 is complete and running, 866 is complete but disassembled also have parts
  16. Old Macks
    The LJSWX (black one) is a complete running truck that was shortened and made into a heavy single axle. It has a very heavy Timken "G" rear in it with torque arm and 24" rubber on spokes.
  17. Old Macks
    Both have EN707s and heavy torque arm rears on 24"
  18. Old Macks
    No
  19. Old Macks
    Please check your DMs
  20. Old Macks
    Thanks for the reply. I am looking for 6 24"tube type rims but 8" wide instead of 8.5"
  21. Old Macks
    Looking for 6 lock ring sets for 24x8" split ring tube type rims. New or good used. Will buy the entire rim if necessary. Thanks.
  22. Old Macks
    PM sent.
  23. Old Macks
    Northeast PA LJX/LJSWX 707 engine and 510A parts
  24. Old Macks
    I have the following that I would sell/trade: 1. Long wb heavy (10mm) single frame with air ride and 14.3K front axle and dual PS boxes; 2. Complete CL hood and misc CL parts; 3. endt865/866 motors and new and used parts; 4. 10 alum hub pilot 24.5 rims, including 2 special edition "limited" front rims; 5. LJX, LJSWX and numerous L model parts; 6. Misc R model cab parts; 7. 2 steel nose (DM/R) radiators; 8. 24" tube type rims; and 9. misc other parts from the 50s-90s
  25. Old Macks
    I'm looking for: 1. a round side mount fuel tank (either with spout or without); 2. LJX/LJSWX radiator; 3. EN510A parts; and 4. New L model parts, especially cab parts. Thanks.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...