Jump to content

Joseph Cummings

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,023

  • Joined

  • Last visited

  • Days Won

    10

 Content Type 

Everything posted by Joseph Cummings

  1. Joseph Cummings
    That number doesn't sound right. Do you have a picture of this pump?
  2. Joseph Cummings
    You can't make this stuff up
  3. Joseph Cummings
    If they aren't put on right, and never lubricated, they don't work for chit. And they are never lubricated because modern mechanics are allergic to grease guns. Hell, just look at the pictures in this thread. New slack, no grease, not in the slack, not in the cam bushings, not in the U Joints,,,,, That's the modern way, need 20 torque wrenches and a micrometer to adjust a door hinge, 100,000 dollar snap on box, and not a grease gun in sight anywhere
  4. Joseph Cummings
    I hate auto slacks. I've seen too many not function properly. I want to get under the truck at least once a week with a wrench and a grease gun and have a good look around. Grease is cheap and easy to install, much cheaper and easier than replacing parts
  5. Joseph Cummings
    Well someone who isn't me experimented a bit, and found that what ate up the most air speed was to cut off the mixture and have the throttle wide open lol. Oh and BTW, that someone who isn't me did some experiments on spinning a Cherokee 180. It was hard to get the damn thing to spin, and really hard to get it to stop spinning. It took about 8,000 feet. Nothing like a Cessna
  6. Joseph Cummings
    I have a Dynatard on my R686 tractor, and I used to drive a R686 with a 750 Holmes on it with a Jake. As far as I remember the Jake performed about the same as my Dynatard. Then again comparing them is kind of hard, different loads, different hills, different amounts of wheels with operating brakes, hardly a scientific test. BTW I was always curious about putting an exhaust brake on a reciprocating aircraft engine. A windmilling prop eats up a lot of airspeed. It'd probably be great for a steep dive
  7. Joseph Cummings
    Yeah, you're a total dick
  8. Joseph Cummings
    Or better yet
  9. Joseph Cummings
    I got better mileage from my EN707 gasoline powered LF wrecker. Hell you'd probably do better with a Hall Scott 1091
  10. Joseph Cummings
    Yeah that would be a problem. How do we know this for sure? Somebody could have put a red knob on anything. I'd want a picture of the valves with the cover off the dash. God only knows what the kind of guy that welds to frame flanges might have done
  11. Joseph Cummings
    You know how many old trucks I've seen converted from handbrake to Maxis without any kind of anti-compounding provision? Pretty much every conversion I've seen. And I've yet to see it break anything. Anybody else remember the 55,000s with the rotochambers on them. You couldn't just bolt a 30/30 maxi on them without some mods
  12. Joseph Cummings
  13. Joseph Cummings
    So he hasn't even tested to see if the line coming from the dash valve is pressurizing when he pushes the knob in?
  14. Joseph Cummings
    Try this. Connect the line from the dash valve straight through to the rubber hose going to the quick release valve mounted on the axle. Eliminate the valve you circled in yellow, just use a coupler. Clamp the line you highlighted in blue off with a pair of vise grips. See if your maxi's release and your service brakes work
  15. Joseph Cummings
  16. Joseph Cummings
    Find a more common version of that rear, and bolt your pumpkin in it. Be nice if you could find one out of a Mack. Although it sounds like a lot less work to just have that bore welded up and re-machined
  17. Joseph Cummings
    Over 140 young girls, mostly Russian Jews and Italians burned or jumped and died. But hey, we were all slave masters and need to pay "reparations"
  18. Joseph Cummings
  19. Joseph Cummings
    I don't know, I'm starting to question everything I was taught in school Here is right from a LBGTSDFGHJKML website
  20. Joseph Cummings
    If I was Governor of Pa I'd open my State of the State with this
  21. Joseph Cummings
    These Brown Shirts liked red flags too. Probably reflected the Evil Eye when they were burning porn and books written by pedophiles.
  22. Joseph Cummings
    WTF is this like "Dance Party With Beyonce?
  23. Joseph Cummings
    I'd go with the red. It makes the Evil Eye bounce off and go back to whoever was casting the Evil Eye. That is why old school Italians always had red dump trucks, and wore the chain with the little red pepper. Jews had a thing like that too, they used to tie a red ribbon on babies for some kind of evil eye thing. That is why the red roof protected that house from the Jewish Space Lasers
  24. Joseph Cummings
    464806080_10230905528333393_8917533528481244846_n.jpg
  25. Joseph Cummings
    Yeah you're a 13%er Should get a 13%er patch made op kinda like these guys with their 1%

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...