Jump to content

Supahonky

Puppy Poster
 View Profile  See their activity

  • Posts

    34

  • Joined

  • Last visited

 Content Type 

Everything posted by Supahonky

  1. Supahonky
    Ok, that’s the one I saw that was cut then. I assumed it had a Speedo cable because the tach was a cable and all the parts say Speedo/tach cable
  2. Supahonky
    What’s up guys, so my truck had a t2080 swapped form the original t2090. The Speedo and tranny temp doesn’t work? I haven’t taken a deep look. It looks like the wires to the temp was cut. my question is are the sensor and cable the same for Speedo and temp? Or do I need to switch and will the temp gauge still be good? I’d assume so but figured I’d ask
  3. Supahonky
    Yeah I ordered the book but it takes a couple of weeks to come in. I’m trying to get my truck to pass safety right now so I can use it. So far I’ve only see one relay from the factory and both in g aftermarket on the truck.
  4. Supahonky
    Ok more info the headlight/parking light switch first pic seems to turn the headlights on in either position the second switch on top of the dash seems to do nothing
  5. Supahonky
    Yeah I sprayed some terminal cleaner and scrapped it around with a pick
  6. Supahonky
    Headlight high low mounted to the floor
  7. Supahonky
    I noticed someone added a side marker onto the dimmer on the buss nest to the headlight could that be interfering with it?
  8. Supahonky
    Yeah I checked there for breaks the hinge area
  9. Supahonky
    So there is a harness that has brown and yellow (same on the dimmer) it shares another harness in the same loom that is a bunch of greens I think it piggy backs to the other headlight. If I disconnect I either lights got out. The green connects to bus next to steering shaft that is 10-14
  10. Supahonky
    And one of this harness does connect to the bus on the firewall
  11. Supahonky
    Looks like a harness comes out of fire wall splits into two harness and leads to a bus next to each headlight
  12. Supahonky
    The dimmer switch was bad I replaced it but I still have nothing. It’s the original connector
  13. Supahonky
    I clicked the link Joey but nothing comes up
  14. Supahonky
    Ok I ran a new power wire to the washer switch and now the pump works. im dead in the water on what to do with the high beam though. Head lights come on and the dimmer switch has power to it but I can’t get the head lights to change any suggestions?
  15. Supahonky
    Not yet I’ve chased down all wires one for the high beam(brown and white I think) on the power buss on the passenger side by headlight was disconnected but nothing. The new switch has power but I can’t get it to send juice to where ever it needs to go
  16. Supahonky
    Thanks Jojo, how does the sequence go for these panels I tried left to right in ascending numbers but the breaker amps don’t match.
  17. Supahonky
    IMG_7233.HEIC ok hopefully this works now… here’s what I have for breakers/relays
  18. Supahonky
    Please post anything you have and I’ll see if it relates. I keep trying to post a picture of the breakers and relays but it won’t post? I’ve posted other pictures no problem. it’s crazy I can’t find info for this truck but my 67 Chevy which is way older I have unlimited information available
  19. Supahonky
    The main thing I’m struggling with is a diagram of all the breakers and the couple relays it would save me lots of time. I found the tank and pump already someone sawzaw’d a flap to access it haha. I’d like to try and maintain the original look but the breaker panel isn’t marked at all I’d hate to just have to run new wires for everything
  20. Supahonky
    It’s an 1989 so shouldn’t there be a manual then?
  21. Supahonky
    For some reason it won’t let me upload a picture of the breakers and relays
  22. Supahonky
    Alright on to the next… anybody have any schematics for the high been circuit and the washer fluid motor circuit?? I’m having a hard time finding such diagrams aswell as a diagram for the relay/beakers 1989 r688st
  23. Supahonky
    Anyone know what torque spec is for the castle nut on the “tie rod” end? Or just tighten the hell out of it?
  24. Supahonky
    This the socket you gets are talking about
  25. Supahonky
    Ok I got it town down and cleaned up the threads in the end of the cap got a little beat up from getting it moving with a punch and hammer but I cleaned them up with a file so they should be good. The only part that I don’t think is great is the boot for the socket end is well worn and has a couple small holes. Any chance of finding a new one?

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...